Cradle for Garmin dezl™ 760LMT, nuvi® 2797LMT & RV 760LMT The RAM-HOL-GA54U consists of a high strength composite cradle and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your GPS and become the most useful accessory in your vehicle. Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. Features: Open access to all electronic ports including audio port, speaker/mic and mini USB Roller design for super smooth placement and removal of the GPS Custom pocket for factory dock Lifetime warranty Made in the U.S.A. Material: High Strength Composite Note: *The RAM-HOL-GA54U was designed prior to the BC20 wireless backup dock was released. The current design will not allow for that dock module to be integrated into the cradle.

Locking Case for the Garmin dezl™760LMT, nuvi® 2797LMT & RV 760LMT The RAM-HOL-GA61LU consists of a high strength composite locking case and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this locking case is ready to compliment your GPS and become the most useful accessory in your vehicle. Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. Locking Case Features: 1. Open access to all electronic ports including audio port, speaker/mic and mini USB 2. Custom pocket for factory dock 3. Rugged construction deters theft and protects vulnerable areas of device 4. Secures at 4 corners with provided hardware 5. Will not obstruct GPS signal 6. Secure USB power connection with wire retention 7. Lifetime warranty 8. Made in the U.S.A. Specifications: Material: High Strength Composite Note: *The RAM-HOL-GA61LU was designed prior to the BC20 wireless backup dock was released. The current design will not allow for that dock module to be integrated into the cradle. The "U" in the part number reflects product packaged in poly bag. Weight: 0.45 lbs. Special Information: Designed for use with third party EOBR equipment and recording hours of service in compliance with CSA (compliance, safety, accountability) initiative. To learn more visit the Federal Motor Carrier Safety Administration (FMCSA) website. For more information about Garmin Commercial Solutions and PND-based Mobile Resource Management (MRM) Solutions, visit the Garmin website.

RAM® EZ-Roll'r™ Locking Cradle for Garmin dezl™ OTR700 The RAM® EZ-Roll’r™ cradle for the Garmin dezl™ OTR700 provides a secure fit with hardware to lock the GPS device into place. With the included cradle lock as a theft deterrent, keep the Garmin dezl™ OTR700 protected when left inside the vehicle. Complete your ideal mounting solution by choosing from a wide variety of compatible RAM® Mounts bases and components to connect to the cradle. Included is a set of two nuts and bolts to connect the cradle to any RAM® components or mounts that contain the universal AMPS hole pattern.   Features: Form-fit cradle designed specifically for the Garmin dÄ“zl™ OTR700, securing your GPS while keeping all buttons and the power port fully accessible Locks the device in place so it cannot be removed without the use of tools Made of high-strength composite for durability and reliability in the most demanding environments Backed by a lifetime warranty Hardware Included: Assembly Hardware (2) #8-32 x 5/8" Machine Screws (2) #8-32 Nylock Nuts (2) 4" Cable Ties Specifications: Hole Pattern: 2-Hole AMPS: 1.912" Materials: High Strength Composite Weight: 0.35lbs

RAM Cradle Holder for the Garmin dezl 560LMT & 560LT This RAM high strength composite cradle is designed to hold the following devices: Garmin dezl 560LMT Garmin dezl 560LT Features: Open access to all electronic ports including audio port, speaker/mic and mini USB Patent pending roller design for super smooth placement and removal of the GPS Custom pocket for factory dock Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM EZ-ROLL'R Model Specific Cradle f/Apple iPad 4, iPad 3 and iPad 2 w/o Protective Case The RAM-HOL-AP15U consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure when on the go. Multiple AMPs hole patterns found on the back of the cradle, make it convenient for attaching various mounts for perfect articulation and viewing angles. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The RAM-HOL-AP15U DOES NOT contain the patent pending Uni-Conn™ docking connector; however, an open space is allocated for free attachment to various cable/docking connectors. Specifications/Features Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Multiple attachment hole patterns for convenient articulation and viewing angles 6. Lifetime warranty 7. Made in the U.S.A. Material: High Strength Composite

EZ-Roll'r Cradle for Apple iPad Mini 4 The RAM® EZ-Roll'r cradle for the Apple iPad mini 4 is the most cost effective and simple way to secure the iPad mini 4 in a variety of applications. The RAM-HOL-AP20U consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. Cradle Features: Compatible with various iPad cable/docking accessories Patent pending roller design for super smooth placement and removal of the iPad High strength materials maximize longevity of cradle Full access to all ports Lifetime warranty Material: High Strength Composite Note: This product is NOT recommended for devices with a Tech Armore Glass Screen Protector. The "U" in the part number reflects product packaged in poly bag.

Tab-Lock™ Locking Cradle f/Apple iPad mini 1-3 with Case, Skin & Sleeve The RAM-HOL-TABL12U consists of a spring loaded backplate, custom support cups and locking mechanism for the iPad mini WITH skin, sleeve or case. This spring loaded design makes it easy to load and unload your iPad mini, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your iPad mini can be used just as it was intended. Quickly lock the cradle, keeping your iPad mini secure and safe from theft. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 6.75" to 8.75" Width: 5.06" to 5.68" Depth: 0.13" to 1" Note: Product consists of holder only. Case not included. Features: 1. Locking mechanism for theft deterrence 2. Support cups contain open slots to accommodate for tablets of various sizes 3. Back plate can support various size support cups 4. Spring loaded tension provides secure support for your tablet 5. Spring loaded cradle allows for quick release of your tablet 6. High strength materials maximize longevity of cradle 7. Full access to all ports 8. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The RAM-HOL-TABL12U is not compatible with the iPad mini 1-3 with LifeProof case. Weight: 1.15 lbs.

RAM EZ-ROLL'R Cradle f/Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The EZ-ROLL'R cradle is compatible with the following tablets: Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE Specifications: Docking Cradle: No Locking Cradle: No Fits Tablets WITH Cases: No Fits Tablets WITHOUT Cases: Yes Low Vibration Environment: Yes High Vibration Environment: Yes Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Lifetime warranty Material: High Strength Composite

EZ-Roll’r™ Cradle for the Apple iPad Pro 10.5 The RAM® Mounts EZ-Roll’r™ cradle for the iPad Pro 10.5 secures your device in a form-fit holder that keeps the entire screen visible. Simply slide your iPad into the bottom cups and then roll the top clip over the top of the device to anchor it into the cradle. The side buttons, camera and charging port are conveniently exposed and accessible. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. Features: Compatible with various iPad cable/docking accessories Patented roller design for super smooth placement and removal of the iPad Pro High strength materials maximize longevity of cradle Full access to all ports Lifetime warranty Made in U.S.A. Material: High Strength Composite Note: This product is NOT recommended for devices with a Tech Armor Glass Screen Protector. The "U" in the part number reflects product packaged in poly bag.

EZ-Roll’r™ Cradle for the Apple iPad Pro 12.9" The RAM® Mounts EZ-Roll’r™ cradle for the iPad Pro secures your device in a form-fit holder that keeps the entire screen visible. Designed for tablets that are not in a case, the EZ-Roll’r for the iPad Pro features a holder for the Apple Pencil as well. Simply slide the tablet into the bottom cups and then roll the top clip over the top of the device to anchor it into the cradle. Side buttons, charging port and camera lens are conveniently exposed and accessible while in the EZ-Roll'r™ cradle. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. Features: Compatible with various iPad cable/docking accessories Patented roller design for super smooth placement and removal of the iPad Pro High strength materials maximize longevity of cradle Full access to all ports Holder for Apple Pencil built into the side of the cradle Lifetime warranty Made in U.S.A. Material: High Strength Composite Note: This product is NOT recommended for devices with a Tech Armor Glass Screen Protector. The "U" in the part number reflects product packaged in poly bag. Weight: 0.7 lbs.

Tilt/Swivel Mount with Quick-Release Cradle f/echoMAP™ Plus 7Xsv Surface mount your compatible echoMAP Plus chartplotter/sounder combo using our bail mount with knobs; the mount tilts and swivels for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM Mount No Drill Vehichle System f/Nissan NV1500, NV2500HD, NV3500HD &  Toyota Tundra This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens) The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics. Compatible Vehicles: Nissan NV1500 (2011-2021) Nissan NV2500 HD (2011-2020) Nissan NV3500 HD (2011-2020) Toyota Tundra (2007-2021) Features: Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board. Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Material: High Strength Composite and Powder Coated Steel Notes: If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.

Bail Mount w/Quick Release Cradle f/ECHOMAP Ultra 12"  Surface mount your compatible ECHOMAP™ Ultra chartplotter/sounder combo using our bail mount with knobs; the mount tilts for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bail Mount w/Quick Release Cradle f/ECHOMAP Ultra 10"  Surface mount your compatible ECHOMAP™ Ultra chartplotter/sounder combo using our bail mount with knobs; the mount tilts for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Tilt/Swivel Mount with Quick-Release Cradle f/echoMAP™ Plus 6Xcv Surface mount your compatible echoMAP Plus chartplotter/sounder combo using our bail mount with knobs; the mount tilts and swivels for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.