Series 32 I-Beam Car - Tandem - Channel Top - 157mm(6-3/16") Strong, stainless steel bodies with flared sides and angled ball bearing wheels provide high load capacity and smooth operation. Applications: Mainsheet systems on boats to 12M(40') Materials: Black Chromed Grade 316 stainless steel car bodies Grade 316 stainless steel wheels and fixtures Specifications: Length: 157mm(6-3/16") M.W.L.: 1,300kg(2,860lbs) B. L.: 4,200kg(9,240lbs) Weight: 735g(25.9oz)

Series 32 I-Beam Car - Saddle Top - Rubber Stand-Up Pad - 76mm(3") Strong, stainless steel bodies with flared sides and angled ball bearing wheels provide high load capacity and smooth operation. Applications: Mainsheet and self-tacking jib travellers on boats to 9m (28ft) Materials: Black Chromed Grade 316 stainless steel car bodies Grade 316 stainless steel wheels and fixtures Specifications: Length: 76mm(3") M.W.L.: 650kg(1,430lbs) B. L.: 2,000kg(4,400lbs) Weight: 320g(11.3oz)

Series 19 I-Beam Car - Channel Top - 51mm(2") Strong, stainless steel bodies with flared sides and angled ball bearing wheels provide high load capacity and smooth operation. Applications: Mainsheet and self-tacking jib travellers on dinghies and catamarans Materials: Black Chromed Grade 316 stainless steel car bodies Grade 316 stainless steel wheels and fixtures Specifications: Length: 51.0mm(2") M.W.L.: 250kg(550lbs) B. L.: 650kg(1,430lbs) Weight: 140g(4.9oz)

Series 19 I-Beam Car - Adjustable Track Stop - Spring Loaded - 25mm(1") Track Fastenings: To suit 5mm(3/16") countersunk fasteners at 100mm(3-15/16") centres. Stop Holes: - 50mm (1-31/32") centres. Track is supplied with RC7250-INS insulating inserts to eliminate corrosion between track and fasteners Minimum Curve Radius For 51mm(2") car Min horizontal 'A' curve radius = 400mm (15-3/4"). Min horizontal 'B' curve radius = 400mm (15-3/4"). For 86mm (3-3/8") car Min horizontal 'A' curve radius = 1200mm (47-1/4"). Min horizontal 'B' curve radius = not suitable. For 105mm (4-3/16") car Min horizontal 'A' curve radius = 400mm (15-3/4"). Min horizontal 'B' curve radius = not suitable. Applications: Mainsheet and self-tacking jib travellers on dinghies and catamarans Mainsheet systems on boats to 9M (28') Materials: Stainless body & plunger

March 893-10-1/4" 24V Pump W/ 1286-0002-0100

BURKS GNA6-1 1/4-5.00, CENTRIFGUAL PUMP ONLY BRONZE-FIT Bronze Fitted Cast Iron Construction. Base mounted Pump Only less Motor. Ports are Inches NPT Inlet, Inches NPT Outlet.   UNSPSC Code: 40150000

BURKS 320G6-1 1/4, CENTRIFUGAL PUMP 230/460v 3PH 2HP Bronze Fitted Cast Iron Construction.   Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 5.13 Inches

BURKS 320GA5-1 1/4, Bronze Fitted Cast Iron Centrifugal Pump 230/460v Bronze Fitted Cast Iron Construction. Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.88 Inches.   Burks end suction, three phase, close-coupled, bronze fitted, centrifugal pump with mechanical seal. They are ideal for booster service, recirculation, general water supply, and washer lines.   Construction: Casing and bracket are close grain cast iron. Enclosed 4-7/8" bronze impeller, 302 stainless steel motor shaft, single mechanical seal, carbon faces, buna elastomers, 304 stainless steel metal parts.  Connections: 1-1/2" X 1-1/4" female NPT suction and discharge Motor: 2 HP, 3450 RPM, Open drip proof, three phase, 208/230/460 volts, 60 Hz, ball bearings front and back, built-in overload protection.    Clockwise rotation, when facing back of motor. Maximum working pressure: 200 PSI Maximum inlet pressure: 70 PSI Maximum working temperature: 180 degrees Fahrenheit Carton dimension: 14" high, 12" wide, 24" long.   Please Contact us for shipping quote at http://www.clrmarine.com/Contact_Us

BURKS 330GA6-1 1/4, Centrifugal Pump 230/460v 3PH 3HP Bronze Fitted Cast Iron Construction. Close Coupled to a 3 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 5.5 Inches.

BURKS T310GA5-1 1/4, CENTRIFUGAL PUMP 3PH 1HP TEFC Close Coupled, 60 Hz, Three Phase, 3500 RPM, 1 Horsepower, TEFC Motor Enclosure, Frame Size 56J.   UNSPSC Code: 40150000

Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame

Bosworth 75-1 1/4 Foot/Check Vlv 1 1/4 Female   Bosworth- Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 1 1/4” Female Threaded Ports

BURKS 310G5-1 1/4, BURKS CIRCULATION G5 PUMP 230-440V 1HP 3PH Centrifugal Pump and Motor unit. Bronze Fitted Cast Iron Construction. Close Coupled to a 1 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.25 Inches.

BURKS 315G5-1 1/4, Centrifugal Pump 3PH 1 1/2HP 230/460v Bronze Fitted Cast Iron Construction. Close Coupled to a 1-1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.75 Inches.

BURKS 315GA5-1 1/4, Centrifugal Pump 230/460v 3PH 1 1/2HP BF All BRONZE Construction. Close Coupled to a 1-1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.56 Inches.