Channel Style Stay Adjuster - 6-7/8" (174mm) Long Applications: Typically used on dinghies, catamarans and small keelboats Materials: Grade 316 Stainless Steel Specifications: Pin Ø: 1/4" Increment Length: 1/2" Qty. Adjustment Settings: 10mm Adjust. Length: 4-1/2" Length: 6-7/8" Weight: 3.2oz

Channel Style Stay Adjuster Typically used on dinghies, catamarans & small keelboats Grade 316 Stainless Steel Specifications: Pin Ø: 3/16" Increment Length: 5/16" Qty. Adjustment Settings: 0.47" Adjust. Length: 3-7/16" Length: 4-5/8" Weight: 1.4oz

FINISH THOMPSON A101991-3 MOTOR ADAPTER 5.5,6,7,8,10

Goulds Pump 2L989 Impeller 6 7/8"

Second Generation Posi-Lock Manual Adjust 2-7/8" Pedestal - No Swivel Non-removable pedestal system in 2-7/8 in. offers a heavy-duty base and post for today's larger and faster recreational boats. The base is permanent mold AC7A aluminum alloy with an anodized finish for maximum strength and corrosion protection. Then a 2-7/8 in. heavy-duty extruded post is pressed and hydra-formed into the base mechanically forming them together. This proprietary process allows maximum strength for a sturdy pedestal. Features: 2-3/8" inner post with 2-7/8" locking adapter, 9 in. round base Adjusts in 1-inch increments  Anodized post and base Use with 2-7/8" Trac-Lock™ slide or swivel (sold separately) Adjust from 11-7/8" to 14-3/4" Warranty: 5 years

Horn Cleat - Nylon - 98mm(3-7/8") Long Features: Rope Ø: 5mm(3/16") U.V. Satbilized Nylon

Sail Slide - Internal Track - 22mm(7/8") Wide x 42mm(1-21/32") Long Impact Resistant, U.V. Stabilized Nylon White

Snap Shackle - Large Swivel Bail - 73mm(2-7/8") Length Heavy duty plunger springs and precision components ensure dependable service. Body and hasp profiles are designed for easy clearance of lines and fittings when released. High strength to weight ratio. Split ring on plunger pin is spot welded for security. A lanyard can be attached to the plunger pin for easy opening. Materials: Grade 15-5PH investment cast stainless steel body and hasp Grade 316 stainless steel plunger pin and spring

Poly-Flex II Styled-to-Fit Boat Cover for 7'8" 5-Seater Paddle Boats - Grey *65" Max Beam Width Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature: 1/4″ strong & durable shock cord encased into hem for a snug fit Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover *Trailerable boat covers must be properly installed and tied down. From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you! Poly-Flex II Good Quality Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty). Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA

Impeller Kit - 10 Blade - Neoprene - 2" Diameter x 7/8"W Pin Drive Insert Material: Neoprene Insert Material:Brass Drive Type: Slotted Shaft Pin Drive or Through Hole Pin Drive Number of Blades: 10 Dimensions: Diameter:2" Shaft Width:1/2" Shaft Diameter:7/8" Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance. Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces. Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

27"-48" Twist-Lock Steering Control Arm Fits 7/8"-1" Wheels Forespar's quick-release Steering Control Arm extends functional range when behind the wheel. Made specifically for use while motoring or easy sailing, the control arm allows the driver to move away from the helm station and still control the steering. This extended range of movement has two specific benefits. First, it enhances safety by allowing the helmsman to move outboard to the rail, increasing their forward sightline. This is especially helpful when trying to see around large headsails. Second, it allows for a number of new sitting positions for additional comfort. On many boats this means the driver can now safely relax on the stern rail seat. The Forespar Steering Control Arm uses a twist-lock extension with a special quick-release attachment clamp mounted to the wheel. It installs in seconds and can be easily deployed or removed with the simple push of a button.

Rub Rail End Cap - 1-7/8" - Stainless Steel Stainless Steel Type 316 Polished Caps rub rail to finish end of rail and ensure that inserts stay intact. Features: Caps rub rail to finish end of rail Ensures inserts stay intact Offers a finished look Stainless Steel Marine Grade 316 Five year limited warranty

Short Adjuster for 1/8" Wire Generally used at the stern rail in conjunction with the single gate eye to tension that section of the gate. Specifications: 1/8" Wire 1/4" Pin 1" adj.

8 Channel NVR Kit with 6 Outdoor IR 5MP IP Cameras 2.8mm Fixed Lens - 2TB Features: EZ Wizard: for easy network and system setup EZ Record: set up recording resolutions and recording type EZ Copy: copy what you are playing onto a USB flash drive EZ App Setup: just scan a QR code with the app to view your cameras on your mobile device Recorder Features: Up to 8MP resolution for live view, recording, and playback Plug & Play – get video automatically via the PoE ports without any setup  Supports streams up to H.265 for reduced bandwidth and reduced hard drive space requirements  QR code-based network setup for easy remote access  Free US-based DDNS service  4K monitor output  Gigabit Ethernet port  Built-in S.M.A.R.T technology (Self-Monitoring, Analysis and Reporting Technology for HDD)  Object and line crossing detection and alerts*  Remote monitoring via PC and mobile apps  2TB storage  Expansion available for up to 8 cameras  Analytics available with optional O8K1A camera  Facial Recognition  Human Detection  Vehicle Detection Camera Features (ONLY WORKS WITH THIS KIT): Supports up to 5MP resolution 2.8mm wide-angle lens True Day/Night operation (IR cut filter) IR range up to 100ft (built-in IR LEDs) Supports H.265/H.264 compression  IP66 compliant, weather-resistant What’s in the box? NVR with 2TB hard drive Six 5MP cameras Six 60ft Ethernet cables One 3ft Ethernet cable Remote control (batteries included) 48V Power adapter HDMI cable

Standard Dee Slotted Pin Shackle - 1/4" Pin - 7/8"L x 9/16"W Features: Slotted shackle pins are low profile to prevent snagging on ropes etc... Grade 316 Stainless Steel bodies and pins