|
All the convenience and features of the standard SnapIt! small cockpit table plus the added benefit of built in wine glass holders. Enjoy your favorite beverage with your meal hands and spill free!
Hundreds of customers are the singing the praises of this innovative table. The support arms securely support the table without the use of a leg, while allowing it to be mounted at a convenient height from the cockpit floor. Use that bungee cord somewhere else! This table folds down and snaps securely in the closed position! Installs in minutes. NO drilling! Comes complete and ready for installation.
W 14 1/2 “ x L 22”
|
185.00 |
|
|
All the convenience and features of the standard SnapIt! large cockpit table plus the added benefit of built in wine glass holders. Enjoy your favorite beverage with your meal hands and spill free!
The support arms securely support the table without the use of a leg, while allowing it to be mounted at a convenient height from the cockpit floor. Use that bungee cord somewhere else! This table folds down and snaps securely in the closed position! Installs in minutes. NO drilling! Comes complete and ready for installation.
W 17 1/2 “ x L 24”
|
250.00 |
|
|
SnapIt! Marine M0019 Wine Glass Holder for Sail & Power Boats
Wine Glass Holder, use the supplied retainer hoop for permanent mounting or use the unit without the hoop for the convenience of snapping the unit on to various tube locations. I.D. 2.05” Overall Height 1”.
|
8.00 |
|
|
Wine Glass Holder. I.D. 2.05” Overall Height 2.25”. Order to fit specific tubing size. Holder is designed to be adjustable for permanent mounting to angled tubes.
|
15.00 |
|
|
SnapIt! Marine P002 Pontoon Boat Double Drink Holder
Double Drink Holder sized to fit can drinks with insulated sleeves and many mugs. Interior Dimension 3.625”(2.9” at narrowest point)x7.85”. Overall Height 3.86”. Cutout on top ring can be useful for hanging sunglasses, etc. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
29.00 |
|
|
SnapIt! Marine M0023 Sailboat Binnacle Mounted Drink Holder
The M0023 Curved Binnacle Drink Holder offers the same functionality as the M005 but is designed to allow additional clearance for the compass on the pedestal. Holds four beverages or two drinks and a pair of binoculars. Early morning coffee? No problem. This unit is designed to accommodate mugs! It snaps directly to the pedestal guard, no other mounting hardware is needed and NO drilling.
Order for specific tube diameter on 9.5" center to center spacing.
For pedestal guards with 12 or 12.5" center to center spacing please see model V0023.
|
75.00 |
|
|
SnapIt! Marine P001KR Pontoon Boat Single Drink Holder
Single Drink Holder sized to fit can drinks with insulated sleeves and many mugs. I.D. 3.625” Overall Height 3.5”. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
23.00 |
|
|
Stackable Water/Wine Glass - NORTHWIND - Set of 6
Practical glasses for water or wine with a navy blue base made of unbreakable MS that will also save you space, as they can be stacked. MS is one of the most knock-resistant materials in the sailing world and will make sure your meals are accident-free.
Features:
BPA Free
Break Resistant
Usage:
This product has been designed for use in normal, not extreme, conditions. Not suitable for drinks with a high alcoholic content or very hot drinks. Not suitable for microwaves. Suitable for dishwashers, but in the upper tray only. To extend the life of the product, avoid using abrasive cleaners.
|
41.83 |
|
|
Non-Slip Wine Glass Party - CLEAR TRITAN™ - Set of 6
The CLEAR wine glass is highly stable thanks to its non-slip base. It is made of TRITAN™. This material is practically unbreakable and with its shine and transparency, it will bring elegance to your table as well as remaining secure during meals.
The collection of non-slip glasses includes the Wine Glass, Champagne Flute, and Water and Beverage glasses Can be matched up with any of the sailing tableware by Marine Business.
Features:
BPA Free
Non-Slip Bottom
Non-Slip
Dishwasher Safe
Top Quality
Break Resistant
Usage:
Tritan™ BPA Free. Sustainability: BPA-free Temperature-resistant. Can contain hot liquids at temperatures up to the boiling point. Can be used in cold temperatures and are freezer-safe Dishwasher and microwave safe. Chemical resistant and withstands harsh cleaners Sparkling clarity and gloss. Impact-resistant and shatter-resistant. Stain and odor resistant.
|
70.21 |
|
|
Stemless Water/Wine Glass - NORTHWIND - Set of 6
The NORTHWIND wine glass is made of MS, a top-quality, shock-proof, and unbreakable material that is also difficult to scratch. Using this material on board stops potential accidents with broken glass.
The water glass can be combined with other articles such as the beverage glass and the wine glass, which all match the compass rose design.
Features:
BPA Free
Break Resistant
Usage:
This product has been designed for use in normal, not extreme, conditions. Not suitable for drinks with a high alcoholic content or very hot drinks. Not suitable for microwaves. Suitable for dishwashers, but in the upper tray only. To extend the life of the product, avoid using abrasive cleaners.
|
52.43 |
|
|
Stemless Water/Wine Glass - SAILOR SOUL - Set of 6
The SAILOR SOUL water glass is made of MS, a top-quality, shock-proof, and unbreakable material that is also difficult to scratch.
Using this material on board stops potential accidents with broken glass.
The water glass can be combined with other articles such as the beverage glass and the wine glass, which all match the nautical design.
Features:
BPA Free
Break Resistant
Usage:
This product has been designed for use in normal, not extreme, conditions. Not suitable for drinks with a high alcoholic content or very hot drinks. Not suitable for microwaves. Suitable for dishwashers, but in the upper tray only. To extend the life of the product, avoid using abrasive cleaners.
|
52.43 |
|
|
SnapIt! Marine H002H Double Drink Holder for Sail & Power Boats
Simply snap one of these unique drink holders onto the horizontal tubing on your boat and put an end to spills on the deck. Interior Dimension 3.6”(2.59” at narrowest point)X 7.35”. Overall Height 8.95”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. (Needs 8" of space between the deck and tube).
|
43.00 |
|
|
SnapIt! Marine P0011 Folding Lunch Table for Pontoon Boats
This Folding Lunch Table for Pontoon Boats measures 21”x13.5”. Lunch table mounts permanently to 1 ¼” square rail commonly found on pontoon boats. Self supporting it folds down and out of the way when not needed.
No drilling required. All mounting hardware included. Color: White.
Custom made at time of order, none returnable.
|
169.00 |
|
|
Hundreds of customers are the singing the praises of this innovative table. The support arms securely support the table without the use of a leg, while allowing it to be mounted at a convenient height from the cockpit floor. Use that bungee cord somewhere else! This table snaps securely in the closed position! Installs in minutes. NO drilling! Comes complete and ready for installation.
W 14 1/2” x L 22”
Custom made at time of order, besure to know your Binnacle Size as these are none returnable.
|
175.00 |
|
|
Hundreds of customers are the singing the praises of this innovative table. The support arms securely support the table without the use of a leg, while allowing it to be mounted at a convenient height from the cockpit floor. Use that bungee cord somewhere else! This table snaps securely in the closed position! Installs in minutes. NO drilling! Comes complete and ready for installation.
W 17 1/2 “ x L 24”
|
240.00 |
|