Trailer LED Guide Light Kit Attwood's LED Trailer Guide Lights provide excellent visibility while backing up and maneuvering your trailer. Guides allow for easy identification of trailer angle and assist when backing at boat ramps and tight areas. The LED lights provide bright indicators in low light conditions. The mounting bracket resists corrosion in the marine environment and is flexible when needed with a spring action base that prevents breaking. Easy installation to the trailer frame. 12 VDC low amp draw. Bright red color. 5 bright LED's Aluminum base attaches to guide posts or trailers Lights completely sealed and waterproof Lasts over 100,000 continuous hours Sold as a pair

Heise LED Lighting Systems Heise LED Lighting, by Metra Electronics are exclusively developed and manufactured to meet all international standards. The range of lighting integrates advanced thermal management, short circuit and open circuit protection and many other innovative features.

  D-SS Driving, Spot & Flood LED Lights   One of Rigid's most versatile, compact lighting solutions just got better with the D-SS, Dually Side Shooter LED cube. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications.   The D-SS cube incorporates the same powerful optics and legendary LED technology as Rigid's popular D-Series lights but with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with Rigid's advanced Flood, Spot, or Driving optics, so there's a D-SS lighting solution for nearly any application.   The D-SS LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only Rigid provides a broad, powerful lighting solution in such a compact package.       Ignite Surface Mount Diffused, Flood & Spot LED Lights   The Rigid Ignite™ is the smallest, most versatile light in Rigid Industries' product line! Measuring approximately 1.4” x 1.4” x 2”, this flexible light packs 1000 raw lumens using Spot, Flood or Diffused beam patterns; perfect for any application where short range light output is needed.   The Ignite also utilizes a Go-Pro® style mounting bracket which mates with an array of off the shelf Go-Pro mounts. Due to the wide range of mounting options, the Ignite's applications are almost limitless. The compact and lightweight housing makes the Ignite a great choice for auxiliary lighting on cars and trucks, motorcycles, UTVs, and even marine applications. Low current draw (less than 1 amp) and voltage requirements (6-28 volts) makes the Ignite adaptable to any application.   *Single light kits include one Ignite, mounting brackets, and related hardware. GoPro Mount Not Included.     Specials   Closeouts    Remanufactured    Rebates  

keywords: Golight, golight led lights, led lighting, led spotlight, led searchlight

Shadow-Caster LED Lighting Shadow Caster specializes in the design and manufacturing of a complete range of innovative LED lighting products and accessories. From marine lighting to patio systems, Shadow Caster offers a wide array of products to fit all of your lighting needs. Shadow Caster specializes in lights that are exceptionally bright, robust and efficient for both marine and terrestrial applications.

Safety First when it comes to Trailer Lighting   Safety is important, not only on the water, but on the road going to and coming from the water. If your trailer is more than a few years old, most likely you have had or are having some issues with the lights and the electrical system on your trailer. Fortunately, most issues are pretty easy to fix.   The first thing to do is to test the lights by hooking up to the vehicle harness and checking all lights to make sure they are bright and working. If any are dim or not functioning, connect a tester to the vehicle harness to see if there might be an issue with the electrical source. Cleaning the connectors of the harness on both the vehicle and trailer side is critical, and can easily be done with a can of electrical connector spray and a fine wire brush. Also, clean the ground contact and tighten the ground wire.   Make sure to check the ground screw and replace it if it is corroded. Most bulbs are easily replaceable by simply twisting them to remove and install them. You can also clean up corroded sockets by gently sanding away the corrosion with fine sandpaper. It's possible you may have to replace wiring, which can be purchased as part of a complete kit that includes new lights, connectors, and lenses. We suggest if you do not have LED light on your trailer to switch over to them. Led lights are brighter, more efficient and has multiply bulbs so you will never have a taillight completely unlit if one bulb burns out.   CLR Marine carries trailer lights and lighting kits, which are complete with license plate holder, wiring and side lights. Along with any other trailer accessory you may need.       Specials   Closeouts    Remanufactured    Rebates  

  Hydro Glow Fishing Lights manufactures high quality, energy efficient, waterproof lights for both above the water and underwater applications.  Hydro Glow Fishing Lights utilize high output LEDs for great fish attracting capability.   S1 Ultra Thin Solar Deck Light Proven Hurricane Tough Body Material: High Impact Polycarbonate Power Supply: USA made High Efficient Solar Panel Battery: Lithium Ion 3.7v/340mah LEDs: 6 USA made LEDs Colors: White, Green, Blue & Red Visual Distance: 500M Working Temperature: -20C (-4F) Life Expectancy: 5 Years Waterproof: IP68 Totally Submersible Size: 4.5" x 3.5" x .4"   SF100G/SF100B - Green & Blue SeaFloor Underwater Lights  The SeaFloor Series of underwater lights are our  "anchored to the bottom" style lights.  This means the light fixture floats so a weight is required to hold the light in the desired location and depth.  The SF100G comes with a 50 foot cord, a 120v to 24v power supply to provide safe current to the light and an array of high output, green LEDs for maximum output and energy efficiency.  The SF100G underwater light is designed to be deployed so the light fixture is floating about 3 feet below the surface.  Because there are no special transformers, ballasts and other parts, there is no need for an electrician.  Simply attach a small weight (about 2 pounds) on the cord, drop it in the water and plug it up.    Installation takes about 5 minutes.  As with all our dock lights, we recommend turning off any other white lights on the dock.  You will be amazed at the amount of fish you will see with the SF100G. Safe low voltage current, very bright and energy efficient best describes theh SF100G, a truely green product.      HG3216G - 4' Long 12VDC Green LED Fishing Light  The HG3216G underwater fishing light is made of deep water fishing.  It is 48 inches long and designed to be deployed right off the side of the boat.  When it submerges to the desired depth simply tie or clamp the cord to a rail or cleat.  The HG3216G features 648, high-output, green LEDs, 20' cord, two amp draw, 4,000 lumen and is virtually unbreakable.  The HG3216G underwater fishing light is perfect for deep ocean and deep lake fishing.  It is commonly used for catching swordfish, tuna, squid, snapper, grouper and many species of bait.  It is also a favorite for deep water freshwater fishing for striped bass, walleye, crappie and lake trout.   HG45 Premium Deep Water Fishing Light  HG45 is very compact, only 5" high and 3" in diamenter.  It is easily stowed in a glove compartment.  The design is for illumination on 4 sides horizontal as well as vertical.  The HG45 is perfect for those overnight offshore trips as well as deep water inshore fishing.  It comes with a 20' cord and alligator clips.  If deepwater fishing is your thing then the HG45.       Specials    Closeouts   Remanufactured    Rebates  

Attwood LightArmor Plug-In Base - 2 Pin - Black - Rectangle INTRODUCING LIGHTARMOR PLUG-IN BASES, a new line of light bases designed for premium performance, styling, and durability. Across the entire product line, you get the intelligent engineering that LightArmor is known for. A Sure Fit The new Light Armor Plug-In Light Bases have a threaded design feature that fits perfectly with the threaded locking collar now offered across the entire line of Attwood Pole Lights. This unique system ensures a tight and secure fit that prevents annoying rattling while underway or trailering Key Features: Threaded Locking System for a secure fit Unique cover design Stays secure while underway or trailered Low-profile prevents water from pooling on top surface WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

40" Post Guide-On With LED Lighted Posts  Post Guide-Ons allow you to see the location of your trailer when it's underwater. Equipped with long lasting, waterproof and shockproof, one piece red and amber LED lamps. The LED lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility over the road at night. Amber light faces front, red faces rear.  Features: Mounting hardware and wiring included  40" Total Height Adjusts Out to 13" each Side Fits Frames up to 3"W x 4-1/4"H 1-1/2" sq. 16 ga Pre-Galvanized Steel post Extends 18" Into 2" PVC tube for strength Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized  The galvanized coating is very thin (0.45 oz. on each side). Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width *Sold in pairs WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Light Armor Underwater LED Light - 12 LEDs - Blue Light Armor Underwater Lights from Attwood, a line of premium surface-mount LED lights that are engineered to be the brightest and most durable lights in the industry. Like all Light Armor products, they're technically advanced, built to perform in the harshest marine environments, and backed by an industry-leading 10-year warranty. Intelligently Engineered for Strength and Durability Exclusive Heat-Sync Cooling System with Active Overheat Protection Resistant to corrosion, chemicals, and UV Damage Extreme impact-resistant lens 3' sheathed wire Reverse polarity protection Fully-sealed waterproof electronics Simple installation with minimal mounting hardware Low-profile design Electro-polished 316 stainless steel cover WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

40" Post Guide-On with L.E.D. Posts & FREE Camo Wet Lands Post Guide-On Pads The kit includes two 40" Post Guide-Ons With L.E.D. Posts and two Camo Wet Lands Post Guide-On Pads. The Post Guide-Ons allows you to see the location of your trailer when it's underwater. Equipped with long-lasting, waterproof, and shockproof, one-piece red and amber LED lamps. The LED lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility over the road at night. Amber light faces front, red faces rear. The camo post-guide-on pads are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).  Features: Mounting hardware and wiring included  40" Total Height Adjusts Out to 13" on each Side Fits Frames up to 3"W x 4-1/4"H 1-1/2" sq. 16 ga Pre-Galvanized Steel post Extends 18" Into 2" PVC tube for strength Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized  The galvanized coating is very thin (0.45 oz. on each side) The cover-pads are made from strong polyurethane-coated 600D nylon fabric Covers have nylon closures on each end Open the bottom and top of the cover-pads to allow LED guide on lamps Covers contain a 1/2" thick closed-cell polyurethane foam inner pad Color of post guide-on covers: Camo Wet Lands Kit Includes: Part 27740: C.E. Smith 40" Post Guide-On With LED Lighted Posts   Part 27902: C.E. Smith Post Guide-On Pad - 36" - Camo Wet Lands  Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width *Sold in pairs

LightArmor Plug-In Base - 2 Pin - Black - Round INTRODUCING LIGHTARMOR PLUG-IN BASES, a new line of light bases designed for premium performance, styling, and durability. Across the entire product line, you get the intelligent engineering that LightArmor is known for. A Sure Fit The new Light Armor Plug-In Light Bases have a threaded design feature that fits perfectly with the threaded locking collar now offered across the entire line of Attwood Pole Lights. This unique system ensures a tight and secure fit that prevents annoying rattling while underway or trailering Key Features: Threaded Locking System for a secure fit Unique cover design Stays secure while underway or trailered Low-profile prevents water from pooling on top surface WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LightArmor Plug-In Base - 2 Pin - Stainless Steel - Round INTRODUCING LIGHTARMOR PLUG-IN BASES, a new line of light bases designed for premium performance, styling, and durability. Across the entire product line, you get the intelligent engineering that LightArmor is known for. A Sure Fit The new Light Armor Plug-In Light Bases have a threaded design feature that fits perfectly with the threaded locking collar now offered across the entire line of Attwood Pole Lights. This unique system ensures a tight and secure fit that prevents annoying rattling while underway or trailering Key Features: Threaded Locking System for a secure fit Unique cover design Stays secure while underway or trailered Low-profile prevents water from pooling on top surface WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LightArmor Plug-In Base - 3 Pin - Stainless Steel - Round INTRODUCING LIGHTARMOR PLUG-IN BASES, a new line of light bases designed for premium performance, styling, and durability. Across the entire product line, you get the intelligent engineering that LightArmor is known for. A Sure Fit The new Light Armor Plug-In Light Bases have a threaded design feature that fits perfectly with the threaded locking collar now offered across the entire line of Attwood Pole Lights. This unique system ensures a tight and secure fit that prevents annoying rattling while underway or trailering Key Features: Threaded Locking System for a secure fit Unique cover design Stays secure while underway or trailered Low-profile prevents water from pooling on top surface WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LightArmor Plug-In Base - 2 Pin - Black - Teardrop INTRODUCING LIGHTARMOR PLUG-IN BASES, a new line of light bases designed for premium performance, styling, and durability. Across the entire product line, you get the intelligent engineering that LightArmor is known for. A Sure Fit The new Light Armor Plug-In Light Bases have a threaded design feature that fits perfectly with the threaded locking collar now offered across the entire line of Attwood Pole Lights. This unique system ensures a tight and secure fit that prevents annoying rattling while underway or trailering Key Features: Threaded Locking System for a secure fit Unique cover design Stays secure while underway or trailered Low-profile prevents water from pooling on top surface WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.