|
Curved Leveler & Wheel Chock
The Camco Curved Leveler is a simple way to level your vehicle by giving a tire up to 4-inches of extra lift. The honeycomb design makes the leveler lightweight but durable. The drive-on curved design allows you to only drive on to as much height as needed, then chock the leveler at the exact right height. The included chock has non-slip rubber grippers on the bottom. Patented.
Features:
Easy drive-on leveler adds up to 4-inches in height
Honeycomb design makes leveler lightweight, but durable
Included chock has non-slip rubber grippers on the bottom
The compact length makes the leveler compatible with tandem wheel spacing without modification
Designed for use with trailers up to 30,000 lb.
Patented
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
29.29 |
|
|
Curved Leveler & Wheel Chock *2-Pack
The Camco Curved Leveler is a simple way to level your vehicle by giving a tire up to 4-inches of extra lift. The honeycomb design makes the leveler lightweight but durable. The drive-on curved design allows you to only drive on to as much height as needed, then chock the leveler at the exact right height. The included chock has non-slip rubber grippers on the bottom. Patented.
Features:
Easy drive-on leveler adds up to 4-inches in height
Honeycomb design makes leveler lightweight, but durable
Included chock has non-slip rubber grippers on the bottom
The compact length makes the leveler compatible with tandem wheel spacing without modification
Designed for use with trailers up to 30,000 lb.
Patented
|
54.28 |
|
|
FasTen Leveling Blocks with T-Handle - 2x2 - Yellow *10-Pack
The Camco FasTen Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Camco’s FasTen Leveling Blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handles easily pull up for carrying or twist down to secure blocks together for storage. Product dimensions: 8.5” x 8.5” x 1”. Stack height should not exceed 4-1/2 inches.
Features:
10 interlocking blocks stack to the desired height for customizable leveling
Carrying handle easily twists to secure blocks together for storage
Strong and durable construction
Safe and easy to use
Compatible with Camco Leveling Blocks
|
38.92 |
|
|
FasTen Leveling Blocks with T-Handle - 2x2 - Brown *10-Pack
The Camco FasTen Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Camco’s FasTen Leveling Blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handles easily pull up for carrying or twist down to secure blocks together for storage. Product dimensions: 8.5” x 8.5” x 1”. Stack height should not exceed 4-1/2 inches.
Features:
10 interlocking blocks stack to the desired height for customizable leveling
Carrying handle easily twists to secure blocks together for storage
Strong and durable construction
Safe and easy to use
Compatible with Camco Leveling Blocks
|
40.03 |
|
|
Fold-Up Trailer Jack - 1000 lb Capacity - Single Wheel
Fits 3 inch x 5 inch tongue and swings up and out of the way. Swing-up jack has a convenient sidewind handle and a tough 6 inch diameter polypropylene wheel.
Features:
Corrosion-resistant, zinc-plated steel tubing
Specifications:
Travel lift (inch): 10"
Lift (inch): 24"
|
39.29 |
|
|
Fold-Up Trailer Jack - 1500 lb Capacity - Dual Wheel
Fits 3 inch x 5 inch tongue and swings up and out of the way. Swing-up jack has a convenient sidewind handle and TWO tough 6 inch diameter polypropylene wheels.
Features:
Corrosion-resistant, zinc-plated steel tubing
Specifications:
Travel lift (inch): 12"
Lift (inch): 26"
|
46.43 |
|
|
RV Stabilization Kit with Duffle Deluxe *14-Piece Kit
The Camco Big Bag RV Stabilization Kit is a 14-piece kit that includes everything you need to stabilize your RV or trailer. Each stabilization piece is made of durable, UV-stabilized resin and is easy to use. The kit includes (2) tri-levelers for customizable leveling, (2) wheel chocks to help keep your trailer in place, (4) regular and (2) large stabilizing jack pads that help prevent jacks from sinking into the soft ground, (2) wheel stops that lock into tandem tires to prevent movement while parked or re-hitching, (1) tongue jack stands to evenly distribute the weight of the tongue and (1) heavy-duty duffel for convenient storage.
Features:
Complete RV Stabilization Kit: This 14-piece kit includes everything you need to level and stabilize your RV or trailer
Durable Construction: Each stabilization piece is made of durable, UV-stabilized resin
Includes: (2) tri-levelers, (2) wheel chocks, (4) stabilizing jack pads, (2) large stabilizing jack pads, (2) wheel stops, (1) tongue jack stand, and (1) heavy-duty storage duffel
Convenient Storage: The heavy-duty storage duffel provides convenient storage
Easy to Use: All items are simple to use
|
122.47 |
|
|
FasTen Leveling Blocks XL with T-Handle - 2x2 - Grey *10-Pack
The Camco FasTen XL Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. The larger size has an increased weight capacity of blocks individually and in a stack, and also provides more surface area for leveling. Each block adds a full inch to stack height. Camco’s FasTen XL Leveling Blocks can be used with single wheels, dual wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handle secures blocks together for storage and easily pulls up for carrying, or pushes down for more compact storage. Individual block measures: 10.5” x 10.5” x 1.5”. Stack height should not exceed 4-1/2 inches.
Features:
The larger 10.5” x 10.5” design withstands more weight and creates more surface area for leveling
10 interlocking blocks stack to the desired height for customizable leveling
Carrying handle easily twists to secure blocks together for storage
Strong and durable construction
Safe and easy to use
|
46.22 |
|
|
Towing & Trailering
Trailering can add new dimensions to the sense of freedom that comes with boating, and that's one of the reasons it's so popular. With a trailerable boat, you're free to boat on just about any lake, river, bay or inlet. Trailering is great way to explore different waterways in your state or region it's also the most affordable way to store your boat. The tips below can help you learn all about towing and boat trailer maintenance.
Look for Certified Trailers NMMA Trailer Logo. Highly trained third-party inspectors visit the manufacturer each year and physically inspect boat trailer models, ensuring compliance to all certification requirements.
Trailering your boat can add new dimensions to the freedom that comes with boating. If you've never trailered a boat, there are several things you need to consider. First, determine the towing capacity of your car, truck or SUV. You can find this information in the owner's manual of your vehicle. Usually compact family sedans are not suitable for towing more than a small, aluminum fishing boat or PWC with a properly mounted hitch and lighting plug . Most standard pick-up trucks and SUVs can trailer boats up to 25 feet, but always consult your vehicle owner's manual for limitations.
The owner's manual of your boat will list the "dry” weight of the boat, less fuel and gear. When you're assessing your vehicle's towing capacity, be sure to add several hundred pounds to the dry weight to account for gear, gas and accessories.
As the weight, length and beam (width) of a given boat increase, so does the muscle power needed to launch and retrieve it. A small boat may be easy for one person to handle at the ramp, but larger boats (generally those more than 25 feet) may require additional hands. Don't be afraid to ask for help at the ramp if you need it, trailer boaters are always happy to help.
STOP Invasive Species
By following these guidelines:
Never release live or dead bait or bait packaging into a water body, or release aquatic animals from one water body into another.
Share live bait with other anglers or empty your bait bucket in the trash before leaving the area.
Don't drive the boat through aquatic plants; avoid chopping vegetation with outboard motor propeller
Once on dry land, drain water out of every conceivable place that can hold water: Follow factory guidelines for eliminating water from engines. All engines hold water, but jet drives on personal watercraft and other boats can hold extra water.
Remove the stern drain plug and put boat on an incline so that all the water drains out.
Drain livewells, bilge and transom wells.
Empty water out of kayaks, canoes, rafts, etc.
Remove any visible plant, fish, and animal or fragment as well as mud, which can house them. Check trailer, in and around the boat itself, the anchor, props or steering nozzle (PWCs and jet boats), lines, fenders, paddles
Rinse your boat, trailer, and equipment. Clean and dry anything that came in contact with the water. It is best to use high-pressure, hot (104°F) water or a solution of one percent table salt and water. A garden hose will work if no other option is available.
Air-dry your boat and equipment for as long as possible—at least five days is optimal.
Specials Closeouts Remanufactured Rebates
|
|
|
Towing & Trailering
Trailering can add new dimensions to the sense of freedom that comes with boating, and that's one of the reasons it's so popular. With a trailerable boat, you're free to boat on just about any lake, river, bay or inlet. Trailering is great way to explore different waterways in your state or region it's also the most affordable way to store your boat. The tips below can help you learn all about towing and boat trailer maintenance.
Look for Certified Trailers NMMA Trailer Logo. Highly trained third-party inspectors visit the manufacturer each year and physically inspect boat trailer models, ensuring compliance to all certification requirements.
Trailering your boat can add new dimensions to the freedom that comes with boating. If you've never trailered a boat, there are several things you need to consider. First, determine the towing capacity of your car, truck or SUV. You can find this information in the owner's manual of your vehicle. Usually compact family sedans are not suitable for towing more than a small, aluminum fishing boat or PWC with a properly mounted hitch and lighting plug . Most standard pick-up trucks and SUVs can trailer boats up to 25 feet, but always consult your vehicle owner's manual for limitations.
The owner's manual of your boat will list the "dry” weight of the boat, less fuel and gear. When you're assessing your vehicle's towing capacity, be sure to add several hundred pounds to the dry weight to account for gear, gas and accessories.
As the weight, length and beam (width) of a given boat increase, so does the muscle power needed to launch and retrieve it. A small boat may be easy for one person to handle at the ramp, but larger boats (generally those more than 25 feet) may require additional hands. Don't be afraid to ask for help at the ramp if you need it, trailer boaters are always happy to help.
STOP Invasive Species
By following these guidelines:
Never release live or dead bait or bait packaging into a water body, or release aquatic animals from one water body into another.
Share live bait with other anglers or empty your bait bucket in the trash before leaving the area.
Don't drive the boat through aquatic plants; avoid chopping vegetation with outboard motor propeller
Once on dry land, drain water out of every conceivable place that can hold water: Follow factory guidelines for eliminating water from engines. All engines hold water, but jet drives on personal watercraft and other boats can hold extra water.
Remove the stern drain plug and put boat on an incline so that all the water drains out.
Drain livewells, bilge and transom wells.
Empty water out of kayaks, canoes, rafts, etc.
Remove any visible plant, fish, and animal or fragment as well as mud, which can house them. Check trailer, in and around the boat itself, the anchor, props or steering nozzle (PWCs and jet boats), lines, fenders, paddles
Rinse your boat, trailer, and equipment. Clean and dry anything that came in contact with the water. It is best to use high-pressure, hot (104°F) water or a solution of one percent table salt and water. A garden hose will work if no other option is available.
Air-dry your boat and equipment for as long as possible—at least five days is optimal.
Specials Closeouts Remanufactured Rebates
|
|
|
RAYMARINE EV-100 WHEEL PILOT
$ave lots of money by using two different discounts, first the Discount code is EV100 enter that when checking out, and then go to our Rebate Page and save another $400.00 in rebates. This coupon code is good until 04-28-2017
The EV Sensor Core
At the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing.
Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.
The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.
Features:
Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change
Flexible installation options. Mount above or below deck
Simple SeaTalkng connectivity to the control head and ACU
Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions
Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays
p70 Autopilot Control Head
The p70 is a push-button operation controller designed primarily for sailboats.
Features:
LightHouse user interface is simple and quick to use
Wide 160° viewing angles
Start up wizard helps you configure the pilot quickly and easily
Anti-reflective coating for improved visibility in bright sunlight
Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness
Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer
Simple system and group dimming/illumination
Support for multiple data sources
SeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required)
EV-100 Wheel Evolution Autopilot
Features:
A complete autopilot-in-a-box
Evolution Ai for superior performance
No calibration required
Quick and easy installation
Fits most types of sailboat wheels
Simple, robust clutch engagement
For boats up to 16,500 lbs (7,500 kg)
For 12V DC power systems
Includes p70 Autopilot Controller
Includes:
EV-1 Sensor Core
p70 Autopilot Control Head
ACU-100 Actuator Control Unit
Wheel Drive
Evolution Cabling Kit
EV Unit O-Ring Pack (set of 2)
Wall Mounting Bracket
|
|
|
Cooler Cart Kit
Camco’s Cooler Cart allows you to roll your cooler, rather than carrying it.
The cart fits different-sized hard coolers with 15.5" to 17.5" widths. Its large, 12" wheels provide easy toting over different terrain and the cart comes equipped with a powder-coated steel frame on zinc-plated steel axles and polyester straps.
Features:
Allows you to wheel your cooler
It fits most coolers with widths up to 17.5"
12" wheels provide easy toting over different terrain
Technical Specifications:
Material: Powder-coated steel frame with zinc-plated steel axles
Weight Capacity: 200lbs
*Sold as an Individual
|
67.85 |
|
|
Eaz-Lift 10" Wheel Stop with Wrench & Lock - Metal
Prevent tandem-tire shift using just one piece of equipment-Eaz-Lift's Premium Metal Wheel Stop. Zinc-plated for corrosion resistance has raised ribs on the contact surface for increased traction which helps prevent tire shift/slippage between tandem tires spaced from 3-10 inches apart. It also includes a comfort-grip ratchet wrench for easy installation and a lock to keep it secure.
Features:
Fits tire spacing from 3" - 10"
Ratchet wrench included for easy installation
Raised ribs for increased traction/less slippage
Lock included for added security
When compressed measures 14" Height x 4" Depth x 3" Width
|
64.56 |
|
|
Camco
Camco started in 1966 and has evolved to four manufacturing facilities and over 400 products. Competitive pricing, superior service, quality products and customer satisfaction are the foundations upon which Camco operates. Camco takes pride in providing outstanding service and meeting the ever changing demands of a challenging marketplace while serving our customers, the most valuable asset.
|
|
|
Mid-Rail Chock/Cleat Stainless Steel
Schaefer T-Track Chock cleats will fit Schaefer T-Track measuring 1" wide, 3/8" overall height, 1/8" "T" thickness and a base width of 1/2". They will not fit earlier versions of T-Track or some competitors models.
Specifications:
Length 6-1/2" (165 mm)
ID 1-7/16" (180 mm)
Line Size 1/2" (13 mm)
Track 1" x 1/8" (25 mm x 3 mm)
Pin. Size 1/4" (6 mm)
SWL 2500 lbs. (1140 kg)
Weight .9 lb. (.41 kg).
|
157.38 |
|