|
SUP D-Ring & Bungee Kit
This kit is suitable for all Solstice Watersports SUPs
In the Box:
96" of 1/4" bungee cord
4 stainless D-rings & anchor pads
1 fl. oz. of vinyl cement
|
18.41 |
|
|
42" x 24" Rafter Inflatable Fender
Solstice Rafter Inflatable Fenders feature innovative high-pressure technology to offer a new, optimized way to protect your boat when docking, and increase stability when rafting up to other boats. Designed with double reinforced, heat & pressure welded PVC that is stronger than the market standard and built to perform against all marine environments including UV rays, chemicals, oil, and petrol exposure. Incredibly easy to deflate, fold, and store back in the included bag - perfect to store in small spaces on boats.
Features:
Inflatable high-pressure boat fender used for docking and/or rafting up to other boats
Acts as a protective barrier between two boats to prevent any scraping, bumping, or denting
2 stainless steel D-ring tie-off points
High-pressure HR valve for quick inflate/deflate
Deflates to become compact & portable for easy storage
Technical Specifications:
Recommended pressure - 1.5-3 PSI
Carry bag dimensions - 27.5" x 9" x 9"
Folded size - 21" x 6" x 5"
In the Box:
Fender
Water-resistant storage bag
(2) integrated D-rings
Repair kit
|
165.59 |
|
|
60" x 18" Rafter Inflatable Fender
Solstice Rafter Inflatable Fenders feature innovative high-pressure technology to offer a new, optimized way to protect your boat when docking, and increase stability when rafting up to other boats. Designed with double reinforced, heat & pressure welded PVC that is stronger than the market standard and built to perform against all marine environments including UV rays, chemicals, oil, and petrol exposure. Incredibly easy to deflate, fold, and store back in the included bag - perfect to store in small spaces on boats.
Features:
Inflatable high-pressure boat fender used for docking and/or rafting up to other boats
Acts as a protective barrier between two boats to prevent any scraping, bumping, or denting
2 stainless steel D-ring tie-off points
High-pressure HR valve for quick inflate/deflate
Deflates to become compact & portable for easy storage
Technical Specifications:
Recommended pressure - 1.5-3 PSI
Carry bag dimensions - 27.5" x 9" x 9"
Folded size - 21" x 8" x 6"
In the Box:
Fender
Water-resistant storage bag
(2) integrated D-rings
Repair kit
|
141.59 |
|
|
443 D-Ring w/3" Stick-On Accessory Mount
Use the Scotty Flexible D-Ring in conjunction with a strap, cord, or bungee to secure anything from a cooler, paddle, drybag or anything else.
WARNING: This product can expose you to chemicals including Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.38 |
|
|
Kayak Deck Bungee Kit
This kit comes with everything needed to add deck bungee to any kayak. Just set the pattern, drill the holes, and tie the related knots, and that's it.
Features:
Proudly constructed in the USA of injection molded nylon and polypropylene
Kit Includes:
11’ of 1/4” bungee (1)
3/8” pad eyes (6)
8-32 X 3/4” OH machine screws (12)
#8-32 Nyloc nuts (12)
#8 flat washers (12)
Specifications:
Fasteners Included: Yes
Weight: 0.50 lb.
|
12.67 |
|
|
Major Repair Kit for Sherwood D-05MJK Major Kit
This kit contains the following items
MS DATA SHEET
1
DATA SHEET
SH 06333
1
BUSHING
SH 10515C
1
SCREW & WASHER
SH 10615K
1
IMPELLER KIT
SH 10927
1
SEAL/SEAT ASSEMBLY
SH 10931
1
VELLUMOID 505 FIBRE GASKET
SH 10944
1
CAM BRASS LARGE CHRYSLER
SH 12710
4
LOCKWASHER
SH 1311
2
DOWELL PIN
SH 1482
4
SCREW HEX HD 1/4"-20 x 1/2"
SH 4257
2
BALL BEARING
SH 4258
2
SNAP RING (SMALL)
SH 4259
1
SNAP RING (LARGE)
SH 4432
1
KEY
This kit is put together at time of order.
|
320.81 |
|
|
Major Repair kit for Sherwood D-55
This kit contains the following items
MS DATA SHEET
1
DATA SHEET
SH 06333
1
BUSHING
SH 10515C
2
SCREW & WASHER
SH 10609
1
GASKET
SH 10612
1
GASKET
SH 10615K
1
IMPELLER KIT
SH 10625
1
SPACER PLATE
SH 10927
1
SEAL/SEAT ASSEMBLY
SH 10944
1
CAM BRASS LARGE CHRYSLER
SH 11515
1
KEY
SH 15883
1
CAM BRASS
SH 343
6
LOCKWASHER
SH 413
2
PINS
SH 4257
1
BALL BEARING
SH 4258
3
SNAP RING (SMALL)
SH 4259
1
SNAP RING (LARGE)
SH 4432
2
KEY
SH 5771
6
SCREW
SH 9959K
1
IMPELLER KIT
This kit is put together at time of order.
|
506.73 |
|
|
Major Repair Kit for Sherwood D-65
This kit contains the following items
MS DATA SHEET
1
DATA SHEET
SH 06333
1
BUSHING
SH 10515C
2
SCREW & WASHER
SH 10609
2
GASKET
SH 10625
1
SPACER PLATE
SH 10927
1
SEAL/SEAT ASSEMBLY
SH 11515
1
KEY
SH 15883
2
CAM BRASS
SH 343
6
LOCKWASHER
SH 413
2
PINS
SH 4257
1
BALL BEARING
SH 4258
3
SNAP RING (SMALL)
SH 4259
1
SNAP RING (LARGE)
SH 4432
2
KEY
SH 5771
6
SCREW
SH 9959K
2
IMPELLER KIT
This kit is put together at time of order.
|
505.28 |
|
|
Major Repair Kit for Sherwood D-75
This kit contains the following items
MS DATA SHEET
1
DATA SHEET
SH 06333
1
BUSHING
SH 10515C
2
SCREW & WASHER
SH 10609
2
GASKET
SH 10625
1
SPACER PLATE
SH 10927
1
SEAL/SEAT ASSEMBLY
SH 11515
1
KEY
SH 15883
2
CAM BRASS
SH 413
2
PINS
SH 4257
1
BALL BEARING
SH 4258
3
SNAP RING (SMALL)
SH 4259
1
SNAP RING (LARGE)
SH 4432
2
KEY
SH 5771
6
SCREW
SH 9959K
2
IMPELLER KIT
This kit is put together at time of order.
|
498.95 |
|
|
Major Repair Kit for Sherwood D-60
This kit contains the following items
MS DATA SHEET
1
DATA SHEET
SH 06333
1
BUSHING
SH 10515C
2
SCREW & WASHER
SH 10609
2
GASKET
SH 10625
1
SPACER PLATE
SH 10927
1
SEAL/SEAT ASSEMBLY
SH 11515
1
KEY
SH 15883
2
CAM BRASS
SH 343
6
LOCKWASHER
SH 413
2
PINS
SH 4257
1
BALL BEARING
SH 4258
3
SNAP RING (SMALL)
SH 4259
1
SNAP RING (LARGE)
SH 4432
2
KEY
SH 5771
6
SCREW
SH 9959K
2
IMPELLER KIT
This kit is put together at time of order.
|
505.28 |
|
|
Leather Case with Swivel Belt Loop & D-Ring for F52D, M85 & M85IS
Features:
Includes a swivel belt loop and D-ring
For Icom IC-F52D and IC-M85 radios
|
46.80 |
|
|
12" x 18" Super Strong Trim Tab Kit w/o Switch -24V - Single Actuator
Lenco Electric Super Strong Trim Tab Kits were designed for sport-fishing boats, high speed cruising boats and large commercial vessels. 7 Gauge flat - 304 SS blades with all stainless steel mounting hardware withstand the rigors of the most demanding conditions. No spray or mist when mounted in recessed pockets. 3/8" diameter hinge pin and 3.75" sacrificial anode. All Super Strong Trim Tab Systems have Vandar Upper Mounting Brackets with Gland Seal and 10 gauge SS lower mounting brackets with 3/8" SS bolts
Actuator Part # 15063-002 (Super Strong 24-Volt Trim Tab Kit)
Specifications:
Suggested Boat Length: 24' to 40'
Length of Tab: 12"
Width of Tab: 18"
Blades: 7 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Switch Required: 10222-211D or 15070-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 24-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1036.84 |
|
|
12" x 18" Super Strong Trim Tab Kit w/o Switch -12V -Single Actuator
Lenco Electric Super Strong Trim Tab Kits were designed for sport-fishing boats, high speed cruising boats and large commercial vessels. 7 Gauge flat - 304 SS blades with all stainless steel mounting hardware withstand the rigors of the most demanding conditions. No spray or mist when mounted in recessed pockets. 3/8" diameter hinge pin and 3.75" sacrificial anode. All Super Strong Trim Tab Systems have Vandar Upper Mounting Brackets with Gland Seal and 10 gauge SS lower mounting brackets with 3/8" SS bolts
Actuator Part # 15056-002 (Super Strong 12-Volt Trim Tab Kit)
Specifications:
Suggested Boat Length: 24' to 40'
Length of Tab: 12"
Width of Tab: 18"
Blades: 7 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Switch Required: 10222-211D, 15069-001 or 15070-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1022.35 |
|
|
12" x 24" Super Strong Trim Tab Kit w/o Switch -24V - Single Actuator
Lenco Electric Super Strong Trim Tab Kits were designed for sport-fishing boats, high speed cruising boats and large commercial vessels. 7 Gauge flat - 304 SS blades with all stainless steel mounting hardware withstand the rigors of the most demanding conditions. No spray or mist when mounted in recessed pockets. 3/8" diameter hinge pin and 3.75" sacrificial anode. All Super Strong Trim Tab Systems have Vandar Upper Mounting Brackets with Gland Seal and 10 gauge SS lower mounting brackets with 3/8" SS bolts
Actuator Part # 15063-002 (Super Strong 24-Volt Trim Tab Kit)
Specifications:
Suggested Boat Length: 27' to 44'
Length of Tab: 12"
Width of Tab: 24"
Blades: 7 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Switch Required: 10222-211D or 15070-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 24-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1176.35 |
|
|
12" x 24" Super Strong Trim Tab Kit w/o Switch -12V -Single Actuator
Lenco Electric Super Strong Trim Tab Kits were designed for sport-fishing boats, high speed cruising boats and large commercial vessels. 7 Gauge flat - 304 SS blades with all stainless steel mounting hardware withstand the rigors of the most demanding conditions. No spray or mist when mounted in recessed pockets. 3/8" diameter hinge pin and 3.75" sacrificial anode. All Super Strong Trim Tab Systems have Vandar Upper Mounting Brackets with Gland Seal and 10 gauge SS lower mounting brackets with 3/8" SS bolts
Actuator Part # 15056-002 (Super Strong 12-Volt Trim Tab Kit)
Specifications:
Suggested Boat Length: 27' to 44'
Length of Tab: 12"
Width of Tab: 24"
Blades: 7 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Switch Required: 10222-211D, 15069-001 or 15070-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1167.83 |
|