Oil Change Pump with Battery Clips - 12V This portable, lightweight Premium Electric Oil Pump is easy to use and transport. The self-priming 12V pump attaches to battery terminals with alligator clips and drains oil through the dipstick tube on outboards and sterndrives. Convenient DIY operation saves money on expensive oil changes. Its compact size makes it is easy to store. Includes 48” inlet and 80” outlet hoses. 12VDC. 60W. Maximum run time: 30 minutes. NOT intended for commercial use. NOT suitable for pumping out transmission oil, water, or flammable liquids. Features: Oil flow rate: 0.84 quarts/min @ 140°F (0.8 liters/min @ 60°C) Diesel flow rate: 1.9 quarts/min @ 75°F (1.8 liters/min @ 23°C) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

  Jabsco offers 3 options of Oil Change Systems to help you get you ready for Winter.         The Porta-Quick Portable Oil Changer makes quick, clean and easy oil changes on-board any boat, because it uses the vessel's own power supply to operate the powerful oil reservoir mounted flexible impeller pump.       The Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engine oil pan or transmission sump.         The Do-it-Yourself Oil Changer will extract up to 50 weight of oil at a temperature of 160°F (71°C) through the engine's dip stick tube, usually in less than 5 minutes.       The Jabsco Flat Tank Oil Changer System simplifies the engine oil changing process, ideal for changing oil in Boats, RV's, and Lawn and Garden Equipment.     Specials    Closeouts   Remanufactured    Rebates

Oil Change Pump w/3.5 Gallon Bucket - 12 VDC, 1.5 GPM Incorporating SHURFLO's advanced motor technology that includes thermal overload protection, general utility pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, oil changing and liquid transfer. 1 Year Warranty. Features: 12 VDC 8' [2.4 m] Cable w/ Battery Clips CE Hose kit 3.5 Gal [13L] Storage Container Uses: Oil changing, winterizing and liquid transfer

3 Port Oil Change System with Reversing Switch - 12V Features: Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models TouchPad Controlled Bronze Manifold System System Sizes from 3 Valves to 6 Valves Resettable Overcurrent and Dry Run Protection Cover Conceals Pump and Circuitry on G Series Oil Pan Adaptors Available for all Common Marine engines

6 Port Oil Change System with Reversing Switch - 12V Features: Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models TouchPad Controlled Bronze Manifold System System Sizes from 3 Valves to 6 Valves Resettable Overcurrent and Dry Run Protection Cover Conceals Pump and Circuitry on G Series Oil Pan Adaptors Available for all Common Marine engines

4 Port Oil Change System with Reversing Switch - 12V Features: Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models TouchPad Controlled Bronze Manifold System System Sizes from 3 Valves to 6 Valves Resettable Overcurrent and Dry Run Protection Cover Conceals Pump and Circuitry on G Series Oil Pan Adaptors Available for all Common Marine engines

    Easy, Quick & Hassle Free The portable oil change bucket features the reliable, heavy-duty F3B-19 flexible impeller pump with an integrated flow reversing switch. The F3B-19 Oil Change Bucket from Johnson Pump provides your service shop with a dependable and long-lasting oil change solution.     Features:   5.5 gallons per minute Flexible Impeller Pump Assembly Easy, quick, no-mess, no-hassle, oil change package Replaceable impeller - nonfixed Automatic shut off Complete, ready to use Portable and convenient High-temperature resistant dipstick tube Heavy-duty extended 8' alligator clips easily clamp directly onto the battery Sealed lid with easy-to-use pour spout for emptying used oil     Better Quality, Better Performance   The preferred OEM replacement for Sherwood 1500k impeller.  Made with the patented MC 97 rubber compound this impeller is designed to provide maximum engine performance and adheres to strict tolerance manufacturing with exact OEM dimensions. • Proven longer impeller life • Less material failure and swelling • Best engine cooling impeller • Stable pressure • Exact dimensions • Used by leading manufacturers   Specials    Closeouts    Remanufactured    Rebates

F38B-19 Multi-Use Utility Pump - Capacity 9GPM / 35 L/MIN With their high level of flexibility, the DC driven pumps from SPXFLOW Johnson Pump are ideally suited for use in boats as bilge pumps, deck wash pumps, fresh water pumps and refuelling pumps for oil and diesel. Not to be used for pumping paraffin or other thin petroleum products. These pumps may be combined with a vacuum switch for automatic operation. Not to be used for pumping paraffin or other thin petroleum products. Perfect for bilge pumping, deck wash, water circulation, oil and diesel refueling at dockside service, etc. The motor has a built-in thermal overload for added protection. Features: Limited 3 Year Warranty Typical applications: Bilge pump, fresh water pump, deck washing, fuel oil transfer, fire pump, oil change pump, etc. Oil-resistant impeller Self-priming Easy maintenance Handle debris (bilge pumping) Self-priming All motors are heavy duty to provide long service life even under heavy use Available in 12 or 24 volts Specifications: Body: Bronze Impeller: 09-824P-9 Seal: Lip seal Connection:  Hose 1" / +" NPT Length: 180 mm - 7" Width:  120 mm - 4.72" Height:  90 mm - 3.54" Weight:  3 kg - 6.6 lbs

Nylon Flagpole Pennant Mounts & Stainless Clips - Pair The Sea-Dog® Adjustable Rail Mount Flagpole is constructed of highly polished, heavy wall stainless steel tubing with an injection molded nylon rail mount bracket. The flag is attached to the flagpole using nylon adjustable flagpole clips in conjunction with stainless steel, spring wire, quick release clips which allows mounting flexibility for a variety of flag or pennant sizes. For use on either 7/8" or 1" tubing. Maximum speed 10 MPH. 

Jabsco 17830-0012 12V Oil Pump Pump Body: Bronze Port Size: 3/8" NPT Impeller: Nitrile Shaft Seal: Buna Lip Type Motor: Reversible Permanent Magnet DC with Integral Reversing Switch, CE and EMC Compliant. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected).    APPLICATIONS The Oil Change Pump is the same high quality pump used in the Jabsco multi-engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. The pump is designed to be installed near a vessel’s engine and permanently plumbed to the engine’s oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve (provided) to guard against accidental oil discharge.    

Round Rainbow Voltmeter with USB & USB-C Power Socket Rainbow Volt Meter with USB 3.0 & USB-C Power Socket charges two devices simultaneously while the rainbow dial displays voltage status. The total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. A protective dust cap extends the life of the charger. The rainbow display gives the user quick, visual, color-coded voltage information.  Includes an On/Off button to conserve battery power when not needed.  Features:  Red/orange means the voltage is too low  Green means voltage is normal  Rainbow volt meter reads voltage up to 14.6 volts Constructed of injection molded nylon  Installation is as easy as drilling a 1-1/8” hole, inserting the socket body, tightening the locking nut, and connecting the wires  Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105)  RoHS compliant & IP65 rating Specifications: Output DC: 5V/6A Input: 8-32VDC USB-C Watts: 60W@24V  USB Watts: 36W@12V Plug-In Side Diameter: (inch) 1-7/16" Length: (inch) 1-1/2" *Sold as an Individual

Hand Bilge Pump 18" x 24" These Manual Bilge Pumps are designed for use in small boats without electrical power or for larger boats in emergencies where power is no longer available. Compact, lightweight, and easy to stow. Foot valve is removable for easy cleaning. Capacities from 6-13 GPM. Pumps feature removable hoses and storage clips. To prevent leaks, hose must be screwed in, NOT pushed in. Constructed of durable UV resistant injection molded nylon.

Hand Bilge Pump 24" x 36" These Manual Bilge Pumps are designed for use in small boats without electrical power or for larger boats in emergencies where power is no longer available. Compact, lightweight, and easy to stow. Foot valve is removable for easy cleaning. Capacities from 6-13 GPM. Pumps feature removable hoses and storage clips. To prevent leaks, hose must be screwed in, NOT pushed in. Constructed of durable UV resistant injection molded nylon.

Hand Bilge Pump 36" x 72" These Manual Bilge Pumps are designed for use in small boats without electrical power or larger boats in emergencies where power is no longer available. Compact, lightweight, and easy to stow. A foot valve is removable for easy cleaning. Capacities from 6-13 GPM. Pumps feature removable hoses and storage clips. The hose must be screwed in to prevent leaks, NOT pushed in, and constructed of durable UV-resistant injection molded nylon.

Jabsco 17830-0024 24V Porta-Quick Flex Impeller Pump Pump Body: Bronze Port Size: 3/8" NPT Impeller: Nitrile Shaft Seal: Buna Lip Type Motor: Reversible Permanent Magnet DC with Integral Reversing Switch, CE and EMC Compliant. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected).    APPLICATIONS  The Oil Change Pump is the same high quality pump used in the Jabsco multi-engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. The pump is designed to be installed near a vessel’s engine and permanently plumbed to the engine’s oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve (provided) to guard against accidental oil discharge.     Jabsco Flexible Impeller Oil Change Pump 24V Reversible