|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
ATLAS™ 10" Hydraulic Jack Plate Heavy-Duty for Verado - Black
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1983.30 |
|
|
ATLAS™ 10" Set Back Hydraulic Jack Plate - Heavy Duty
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1885.68 |
|
|
ATLAS™ 4" Set Back Hydraulic Jack Plate - Heavy Duty
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1657.27 |
|
|
ATLAS™ 12" Set Back Hydraulic Jack Plate - Heavy Duty - Black
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2086.74 |
|
|
ATLAS™ 12" Set Back Hydraulic Jack Plate - Heavy Duty
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1921.33 |
|
|
ATLAS™ 14" Set Back Hydraulic Jack Plate - Heavy Duty
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade. T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1980.37 |
|
|
ATLAS™ 4" Set Back Hydraulic Jack Plate - Heavy Duty Black
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1714.52 |
|
|
ATLAS™ 6" Set Back Hydraulic Jack Plate - Heavy Duty - Black
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1879.46 |
|
|
ATLAS™ 6" Set Back Hydraulic Jack Plate - Heavy Duty
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1740.92 |
|
|
ATLAS™ 8" Set Back Hydraulic Jack Plate - Heavy Duty Black
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1897.64 |
|
|
ATLAS™ 8" Set Back Hydraulic Jack Plate - Heavy Duty
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1844.66 |
|
|
ATLAS™ 10" Set Back Hydraulic Jack Plate Polished
Rated for engines up to 300hp or up to 625 pounds dry weight.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1654.36 |
|
|
ATLAS™ 8" Set Back Hydraulic Jack Plate Polished
Rated for engines up to 300hp or up to 625 pounds dry weight.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1629.73 |
|
|
ATLAS™ 12" Set Back Hydraulic Jack Plate Polished
Rated for engines up to 300hp or up to 625 pounds dry weight.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1797.60 |
|