|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
Boat Outfitting Equipment and Supplies
When it comes time for outfitting your boat, you can get all your boating supplies and boating accessories from us. You will never need to go anywhere else for your boat outfitting, because we have all the boat supplies you need. If you're looking for anchors/chain/rope, anodes, antifouling systems or boarding ladders, we have you covered. We can also offer you a selection of bottom paint and bow thrusters to choose from. You may also want cleaning supplies that offer deck/galley options so you can get your boat sparkling and ready to enjoy. We also have display mounts and docking accessories to complete your outfitting needs.
|
|
|
|
|
|
Towing Mirror Clamp-On - Double Mirror
The Camco Clip-On Dual-View Tow Mirror gives you more visibility when towing, making driving while towing safer and giving you peace of mind. The Dual-View Mirror has two independently adjusting mirrors and an aerodynamic design that reduces vibrations. Installation is easy- there are no tools required. The adjustable rubber straps fit around any mirror between 7 and 10 inches tall. Clip-On Mirror fits driver or passenger side mirror.
Features:
Provides more visibility when towing
Large and small mirrors adjust independently
Fits driver- or passenger-side mirror
Quick and easy to install- no tools required
Adjustable rubber straps fit around 7 to 10-inch tall mirrors
|
25.45 |
|
|
It's that time again when Old Man Winter is shortening or ending our sailing season. Maybe you store your boat in a garage, barn, or at a marina. Now is the time to brush up on safe and useful storage tips.
1. When packing up, clean your electronics with a microfiber cloth by wiping down buttons and screens. A soft cloth is recommended with bottled water to clean screens that may have been stained by saltwater. Screen cleaners will not do the job. You may want to document the wiring so that installation is easy when you are ready to launch.
2. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
3. Remove all batteries. Charge your batteries, clean the terminals, and put a light coat of grease on the terminals. Store your batteries in a warm, dry place. Not in the boat.
4. Winterize the engine:
Use fresh water to flush the engine, including the cooling system, to remove corrosion, dirt, salt, and residue
Refill the cooling system with antifreeze.
Warm up the engine to loosen impurities.
Replace the oil and filters.
Look for the residue of old oil.
Remove and store all belts.
5. Fill the engine with gas and stabilizer. Run the engine for 15 minutes so that the mixture reaches the engine. If your engine uses E-10 fuel, take extra care in that it absorbs moisture ten times more than typical gasoline. (source: trailervalet.com).
6. A thorough cleaning of the boat before you store is a must, whether you have a small fishing boat or a six-cabin yacht. Soap and water will do a thorough job. Clean lockers, refrigerators, coolers, sinks, and cushions. Open all and allow to dry before you store. Next, clean the entire outside from bow to stern. End your cleaning with a coat of wax to the exterior and polish. Leaving a clean boat will make the launch process a lot easier when it's time.
7. Keeping mold and mildew at bay: Mildew comes from humidity. The best way to reduce humidity is ventilation. Although some skippers button up their boats to be airtight for the winter, there has to be some ventilation source. Use products that absorb moisture such as Damp Rid or purchase a dehumidifier such as Eva-Dry Mini Dehumidifiers. Find and seal any leaks and keep the boat clean. Cover the boat with either shrink wrap or a boat cover.
8. Shrinkwrap or a canvas boat cover? Ratings and opinions from the Hull Truth Boating Forum suggest that canvas covers are a better option for durability and cost. The canvas covers can be used season after season. With shrink wrap covers, there is the cost of installation every year. One source said if you are north of Boston, shrink wrapping is preferable because snow will slide right off the plastic wrap, versus weighing down the canvas. Contributors also felt the boat stays cleaner with shrink wrap.
Remove boat cushions, or not? The jury is out about removing boat cushions. Many skippers remove all cushions and bedding. Others spray the cushion bottoms with anti-mold spray. If keeping cabin cushions on the boat, stand them up on end to reduce the chance of mold. Most important is to keep as much moisture out of the cabin, as mentioned above.
Do everything you can to keep your boat critter-free during the winter. Lock all windows. Many small, rabid animals, especially raccoons, are looking for a warm place to nest for the winter. Raccoons are drawn by any food left in boats and will chew carpeting and cushions. Once inside a locked boat, they have no way to exit since they have most likely fallen from an open window. The messes they leave, including their waste, can be very unpleasant and a costly wake-up call in the spring. Keep mice out by plugging up scuppers and vents. Many skippers use Dryer Fresh Cab rodent repellent hoping the strong scent will repel rodents.
Circle Saturday, May 22, 2021, on your calendar. That is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water for a great boating season.
Fair Winds. Smooth Sailing
To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/.
__________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com
|
|
|
Happy New Year! This past year has been a time of tumultuous panoptic upsets: The pandemic, political unrest, and nature's mayhem of hurricanes, tornadoes, and fires. However, boaters still have our beautiful waterways, lakes, harbors, and our oceans to enjoy and use as an oasis of tranquility, peace, and sports.
We eagerly look forward to the boat shows across the country to learn new techniques, sample new products, and get ready for a safe and fun-filled boating season. The following is a snapshot and calendar of 2021 Boat Shows going live and in-person and shows going virtual. Before attending an in-person show, please go to the show's link to find out about COVID-19 policies.
The big three shows that draw national and international crowds are the Ft Lauderdale, Annapolis, and the Chicago Boat Shows.
Chicago
The Chicago Boat Show, usually held the second week of January, was cancelled for this year. Show promoters have told fans to plan on the in-person show from January 12-16, 2022.
Annapolis, MD
Annapolis, MD, promises a wonderful in-person United States Sailboat Show October 14-18, 2021, at the City Dock in beautiful downtown, historic Annapolis. This internationally acclaimed sailboat show is recognized as the world's largest and most prestigious sailboat show.
Fort Lauderdale
Miami -The Fort Lauderdale International Boat Show (or FLIBS as it is affectionately called) will be held October 27 - 31, 2021. The show claims to be the largest boat show globally, covering more than 2,992,367 square feet.
The 2021 Boat Shows
Cleveland Boat Show & Fishing Expo. January 15-24, 2021. Virtual
Seattle Boat Show. January 28-31, 2021. Virtual
Michiana Boat & Sports Show February 19-21, 2021
The Boat Show in Springfield, IL February 26-28, 2021
Lake County Boat Show February 26-28, 2021
Akron Boat Show & Water Sports February/March 2021
Downtown Knoxville Boat Show March 4-7, 2021
World Fishing & Outdoor, Suffern, NY March 4-7, 2021
Orlando Boat Show March 5-7, 2021
Atlantic City Boat Show April 7-11, 2021
Tampa Boat Show September 10-12, 2021
Norwalk Boat Show, Norwalk, CT September 23-26, 2021
2020 – Catalina Yachts Suffers Two Losses
Frank Butler, the founder of Catalina Yachts, died in late November 2020. Frank Willis Butler, 92, president and Chief Executive Officer of Catalina Yachts, died at Westlake Village on Nov. 15, 2020, from unexpected complications from a recent illness.
Butler founded Catalina Yachts in 1969 in Hollywood, CA. The company has grown to become the largest builder of fiberglass production sailboats in the United States.Long Beach Yacht Club Commodore Charles Legeman said, "Frank Butler is the one person who helped take the Congressional Cup to the top level in the world by his donation of the Catalina 37s, which were specifically built for match racing."
Catalina Yacht fleets of Catalina owners sprang up across the county. Many skippers, both of us included, owned Catalina sailboats throughout our sailing history. Catalina sailboats provided sailing ease in addition to sound design and were very forgiving for the less-than-experienced sailor.
Another Blow to Catalina Yachts
In mid-December of 2020, the Catalina Yacht factory in Largo, FL, was hit by a tornado. The high winds did extensive damage to the factory building, and boat molds that weigh 20,000 pounds were pushed around like paper. Sharon Day is the company's president and explained, "Workers at the plant work a 6:30 a.m. to 2:30 p.m. shift, so no workers were on duty when the tornado hit."
As we venture into 2021, we wish our readers safe boating, fair winds, and smooth sailing.
To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/.
______________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com
|
|
|
Purchasing and owning a boat is a major investment. If you want to get the most from your investment, you must keep your boat in working order and in good condition.
Many new boat owners don’t know how to keep up with maintenance. Fortunately, it’s not impractical if you understand what boat maintenance entails and develop a system. Below, CLR Marine discusses some maintenance essentials to prolong your boat’s lifespan and avoid safety issues on the water!
Engines
No component is perhaps more critical than your boat’s engine. Engine failure is not only inconvenient but can also be dangerous when you’re out on the water. That’s why it’s important to prepare and repair your engine while you’re on land and have access to the necessary parts.
There are many steps to checking and maintaining a boat engine, but here are a few of the most crucial ones
●Replace all engine filters and fluids each year.
●Inspect all hoses and clamps, replacing them as needed.
●Inspect the fuel system for leaks or damage, and replace any components that are not in tiptop shape.
●Regularly evaluate the ventilation and exhaust systems.
●Regularly inspect the raw water pump, replacing the rubber impeller once a year.
●Closely evaluate hoses, cables, and any other engine components.
The easiest way to keep up with the responsibilities is to use PDF files to track, update, and share maintenance schedules and duties. Use this tool to add pages to a PDF and easily modify the document as needed.
Electrical Components
Your boat’s electrical system is also challenging to maintain when you’re already on the water. Avoid leaving the radio, light, or other electrical parts on for extended periods when the engine is running; otherwise, you could face a dead battery.
Inspecting the battery and cable connection for corrosion and other damage is also a good idea. Replace the battery, cables, breakers, switches, fuses, and any other parts that need it. Further, you’ll want to ensure all the lights are functioning and that you have quality jumper cables for emergencies.
Hull, Propeller, and Motor
It’s critical to check the hull, propeller, and motor to ensure they are in top condition. Fight the temptation to procrastinate on replacing any necessary components until next season. The last thing you want to do is forget and face problems on the water.
The propellers should be properly secured, straight, and undamaged. Ensure the hull doesn’t have any distortions, cracks, or blisters, and give it a good deep cleaning. While you’re at it, evaluate your anchor and its rode to confirm they are up to the task.
Safety Gear
The importance of having a good set of jumper cables for emergencies. Several other items are necessary to protect you and others on the water. Make sure you have the following safety equipment and that they’re in working order:
●Life jackets
●Fire extinguishers
●Carbon monoxide detector
●A basic first aid kit
●An emergency signal kit
Cosmetics
Finally, you want to ensure your boat looks the part. This means cleaning it regularly and winterizing it for the cold months. Also, Make sure you have the right to use the right supplies and tactics to keep your vinyl upholstery sparkling and free of mildew stains.
Don’t allow your investment to go to waste. Keeping up with boat maintenance is essential for keeping your boat safe, functioning, and attractive. Coming up with a schedule and a checklist can make the difference between enjoying a long-lasting boat and paying for expensive repairs.
Would you like to read more helpful content or browse our wide selection of marine supplies? Visit CLRMarine.com today!
Written By Kelli Brewer
|
|
|
A revamped DiscoverBoating.com Web site officially launches today, featuring an updated look and several new, interactive features designed to show visitors how easy it is to become a boat owner.
“All of the new tools on DiscoverBoating.com, both active and planned, are designed to generate additional boating prospects, which is especially important this year for our industry stakeholders,” Carl Blackwell, vice president of marketing communications for Grow Boating, Inc. and the National Marine Manufacturers Association, said this afternoon.
The site focuses on activities for boaters, while incorporating images of people partaking in fishing, sailing or watersports.
Consumers have the opportunity to select their activity of choice by clicking on the specific icon and are redirected to a page providing relevant information about that particular activity, including boat type selections, tips and resources.
“By increasing the focus on boating activities and making the site more interactive, we anticipate people will get that much more excited about getting out on the water and, ultimately, buying a boat,” said Armida Markarova, director of interactive marketing for Grow Boating Inc. and the NMMA, in a statement
DiscoverBoating.com also features the Boating Affordability Tool/Budget Planner, which compares the cost of boat ownership to several other popular family leisure activities.
Another new feature is the “Baby Boomer” section, which goes live this week. The Boomer section positions boating as the ideal activity to enrich a person's “Golden Years.” The Boomer section features a call to action for visitors to request a free copy of the “Get Started in Boating” DVD, experiment with the Boat Selector Tool and calculate the cost of boat ownership.
To answer pleas from wannabe boat owners, the Spousal Conversion Kit also launched this week as part of DiscoverBoating.com's overall redesign. The kit provides Web site visitors with a seven-step process to help convince their significant other that the time has come to purchase a boat.
Blackwell said recent media coverage of the Spousal Conversion Kit and our spokesperson, Mike Schmidt, a baseball hall-of-famer, has helped drive people to the Web site.
“Schmidt conducted countless interviews recalling his experiences talking his wife into allowing him to purchase a boat (eventually two boats) that were fun and entertaining,” Blackwell said. “It resulted in stations all across the country coming to us requesting interviews. The interview drove people back to DiscoverBoating.com, as Schmidt mentioned his experiences as a boater and angler and the time he spent on the Web site. The results far exceeded our expectations.”
For information about DiscoverBoating.com, contact Markarova at (312) 946-6284 or amarkarova@nmma.org.
|
|
|
Have Fun On Your Boat This Summer
With CLR Marine
AIRHEAD REVOLUTION
Outrageous 2 Rider Spinning Towable
AIRHEAD REVOLUTION provides unparalleled spinning fun for 2 riders. Lie down or sit up, either way, you're going to spin like there's no tomorrow! The strategically placed inflatable topside divider fin and 2 leg holding fins keep you from getting thrown off by centrifugal force. You're too old to enjoy spinning? Just thread the tow rope through the No Spin Strap and enjoy a mild ride.
FUSION 700 Series
MS-IP700 Marine Stereo for iPod
The 700 Series True Marine Entertainment System is the culmination of FUSION's engineering and design brilliance, resulting in a product with superior sound quality, controls and features never seen before. The MS-IP700 represents the perfect mix of innovation, functionality and ease of use, driven by feedback from the marketplace direct to your vessel.
Magma Marine Grills
Adventurer Series "Cabo" Charcoal Grill
Designed for today's eco friendly boater who doesn't want to substitute quality for cost. The "Cabo" is a charcoal grill made entirely of 18-9 mirror polished marine grade stainless steel. Designed with the same quality you've come to expect from all Magma Products, this grill has a 9" x 18" or 162 sq. in. grilling surface, and features a stay-cool plastic handle, locking grease tray and fold-away legs.
|
|
|
ZXR-361 Pivoting Mirror Bracket for Nautique Boats - Silver
The ZXR-361 Windshield Mounted Pivoting Mirror Bracket provides a secure windshield mount for the VR-140 Series Panoramic Mirrors. The patent-pending design accommodates most new windshield trims and the multi-position, full-metal locking mechanism provides a new standard for rigidity in rough waters. The lock system is made from hardened stainless steel aerospace alloys for years of reliable service. It fits the current model Veralex Windshields.
This is easy to use with an intuitive pull and release knob. . . and the locking mechanism is twice as strong as its predecessor.
Compatible with Nautique boats.
Click Here to Find Your Mirror Bracket
Mirror sold separately.
*Sold as an Individual
|
241.79 |
|
|
ZXR-361 Pivoting Mirror Bracket for Nautique Boats - Black
The ZXR-361 Windshield Mounted Pivoting Mirror Bracket provides a secure windshield mount for the VR-140 Series Panoramic Mirrors. The patent-pending design accommodates most new windshield trims and the multi-position, full-metal locking mechanism provides a new standard for rigidity in rough waters. The lock system is made from hardened stainless steel aerospace alloys for years of reliable service. It fits the current model Veralex Windshields.
This is easy to use with an intuitive pull and release knob. . . and the locking mechanism is twice as strong as its predecessor.
Compatible with Nautique boats.
Click Here to Find Your Mirror Bracket
Mirror sold separately.
*Sold as an Individual
|
241.79 |
|
|
ZXR-361 Pivoting Mirror Bracket for Nautique Boats - Titanium Grey
The ZXR-361 Windshield Mounted Pivoting Mirror Bracket provides a secure windshield mount for the VR-140 Series Panoramic Mirrors. The patent-pending design accommodates most new windshield trims and the multi-position, full-metal locking mechanism provides a new standard for rigidity in rough waters. The lock system is made from hardened stainless steel aerospace alloys for years of reliable service. It fits the current model Veralex Windshields.
This is easy to use with an intuitive pull and release knob. . . and the locking mechanism is twice as strong as its predecessor.
Compatible with Nautique boats.
Click Here to Find Your Mirror Bracket
Mirror sold separately.
*Sold as an Individual
|
241.79 |
|
|
Summer, swimming and boating are all synonymous with having a good time on the water. Whether you are on a boat or on a dock, when the heat of the sun kicks into high gear, your first impulse is to head for the water.
Swimming off a boat or dock can be refreshing, but safety has to be the first consideration. Unfortunately, it is the swimming accidents and statistics about these accidents that stick in our minds.
What to do if you see Electric Shock Drowning
According to ESFI, The Electrical Safety Foundation International, a premier non-profit organization dedicated exclusively to promoting electrical safety at home and in the workplace, the following should regarding potential Electric Shock Drowning:
Do not enter the water.
• Turn off the source of power
• Call 911
• Use an insulated device (such as fiberglass rescue crook) to attempt to remove the victim from the water
If a swimmer is experiencing difficulty, such as paralysis, don't let anyone jump in the water! Get the dock power turned off immediately. Most docks have an emergency shut off switch. Contact your dockmaster for its location, or about getting one installed. Anyone using the dock should know where the emergency switch is located.
To assist the swimmer who has been shocked, get a nonmetal device. Stay away from the dock's metal swim ladders.
Electricity can seep into the water from a boat, hot tub, pool or marina. Swimmers can also experience electric shock when reaching for a metal ladder (mentioned above) that has been in the water with electrical current.
The Electric Shock Drowning Prevention Association, an organization dedicated to raising awareness and educating people on the risks of electric shock drowning, has recorded 84 cases in the U.S. since 1986. It may seem like a low number of fatalities, but if it is someone you love who dies, one death is too many.
The best way to avoid electric shock is to install ground fault devices on power sources at the breaker.
A ground fault device protects the entire power source from its start and prevents the current from following any unintended paths during a ground fault (contact between an energized conductor and the ground).
Swimming off the dock in a marina.
Please don't do it. It is a dangerous adventure that can quickly turn fatal. Electric Shock Drowning (ESD), will most likely be fatal. It happens when 120-volt AC (alternating current) from nearby boats, or docks electrocutes or incapacitates swimmers in freshwater. As swimmers enter the water the electricity
paralyzes their muscles, causing the person to drown.
Swimming off a boat
Electric Shock Drowning happens in freshwater and many times involves a swimmer making contact with a metal ladder that is electrically charged. If a swimmer is attempting to board your boat and feels any tingling or paralysis:
• don't jump in the water
• turn off all power on the boat
• Call 911, the marine police, coast guard, or coastguard auxiliary to get help underway.
• Use wooden oars or some nonmetal objects to rescue the swimmer.
More safety features when swimming off a boat
• With swimmers in the water, one adult who knows how to operate the boat should be on board at all times.
• All engines should be off before swimmers enter the water
• A flotation device attached to a tow rope or line secured to the boat should be in the water for a swimmer to grab if needed.
Keeping your boat safe
Talk to marina owners or operators about the danger of ESD. Ask your marina operator to prohibit swimming at their facility and post signs.
Ask marina operators if they are aware of and following the guidelines from NFPA 303 (Fire Protection Standard for Marinas and Boatyards) and National Electric Code (NEC) 555.
Never use household extension cords on your boat. Shore power cords meeting UL standards are required.
Your boat can be tested and inspected for electricity leaks by a qualified electrician trained to ABYC standards.
Whether in freshwater or saltwater, never dive on your boat for repairs while connected to shore power.
ESD How does it happen
ESD is caused by alternating current (AC) flowing through fresh water encountering a human body. The current tries to pass through the body and causes skeletal muscular paralysis, which ultimately results in a drowning. The above picture shows you how the current flows.
There are many devices that can be installed in the water near your boat, dock or pool to detect electrical leaks that could lead to electric shock. One example is. It is used for boats, pools, and marinas. The ShockAlarm is easy to test and continually monitors while in the water. One user said it had detected electricity in the water on several occasions before swimmers were about to enter. Users suggest that this alarm is in the water at all times when swimmers are present.
Swimming during the summer or anytime should be enjoyable, refreshing, and safe. Have a great summer on the water.
Fair Winds. Smooth Sailing.
___________________________________________________________________________________________________________________________
To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/.
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2020
|
|
|
CLR Marine carries Solas® Amita 3-Blade Mercury 6-15hp aluminum boat propellers that utilize a state-of-the-art squeeze-casting process & makes these aluminum boat propellers stronger and tougher than traditional die-cast boat propellers. To learn more visit this link.
We also have a custom propeller search tool, making it SUPER EASY to find your replacement propeller today!
|
|
|
Mirror/Bracket Kit with VR-140 Elite Mirror & ZXR-300 (Silver)
The 6" x 20" VR-140 ELITE offers unparalleled viewable range and clarity via prescription grade optics. For the first time ever, the boat driver can follow a skier or wakeboarder from port to starboard inside of one uninterrupted, high-definition, high-resolution mirror.
The ZXR-300 Windshield Mounted Pivoting Mirror Bracket provides a secure windshield mount for the VR-140 Series Panoramic Mirrors. The patent-pending design accommodates most new windshield trims and the multi-position, full-metal locking mechanism provides a new standard for rigidity in rough waters. The lock system is made from hardened stainless steel aerospace alloys for years of reliable service.
In the Box:
VR-140 Elite (Silver)
ZXR-300 Mirror Bracket (Silver)
Ultra-High Bond, Pressure-Sensitive Adhesive
Easy-to-Follow Installation Instructions with Mounting Template
Click Here to Find Your Mirror Bracket
*Does not include cover
*Sold as an Individual
|
628.66 |
|