|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
Heavy Duty Waterproof 2-Speed Wiper Motor - 1.5" Shaft - 12V
High Performance at a Competitive Price. Your boat's windshield wipers are only as powerful as the motor that power them. The Ongaro Heavy Duty Waterproof Motor offers the security of waterproof protection and delivers dependable, trouble-free operation all at a competitive price. Easily replaces older Ongaro and Bosch-type wiper motors for a simple, yet powerful, upgrade.
Features:
Torque of 15 N-m
Two speeds
Accepts up to 24 x 24" arm and blade
Self-parking gear to left or right
Adjustable sweep angle
12V
Improved waterproof rating to IP66
Rigid aluminum housing
Insulated grounding
EMC protected
CE Approved
Additional Features:
Two sweep speeds of 35 or 55 sweeps per minute
The sweep angle can be adjusted from 40 to 110 degrees
High quality all aluminum housing dissipates heat more efficiently than plastic for longer motor life
The aluminum construction also provides better stability when mounted
The insulated grounding is suitable for use with steel, aluminum, wooden or GRP boats
Guaranteed for 3 years
|
117.40 |
|
|
Heavy Duty Waterproof 2-Speed Wiper Motor - 2.5" Shaft - 12V
High Performance at a Competitive Price. Your boat's windshield wipers are only as powerful as the motor that power them. The Ongaro Heavy Duty Waterproof Motor offers the security of waterproof protection and delivers dependable, trouble-free operation all at a competitive price. Easily replaces older Ongaro and Bosch-type wiper motors for a simple, yet powerful, upgrade.
Features:
Torque of 15 N-m
Two speeds
Accepts up to 24 x 24" arm and blade
Self-parking gear to left or right
Adjustable sweep angle
12V
Improved waterproof rating to IP66
Rigid aluminum housing
Insulated grounding
EMC protected
CE Approved
Additional Features:
Two sweep speeds of 35 or 55 sweeps per minute
The sweep angle can be adjusted from 40 to 110 degrees
High quality all aluminum housing dissipates heat more efficiently than plastic for longer motor life
The aluminum construction also provides better stability when mounted
The insulated grounding is suitable for use with steel, aluminum, wooden or GRP boats
Guaranteed for 3 years
|
119.02 |
|
|
Heavy Duty Waterproof 2-Speed Wiper Motor - 3.5" Shaft - 12V
High Performance at a Competitive Price. Your boat's windshield wipers are only as powerful as the motor that power them. The Ongaro Heavy Duty Waterproof Motor offers the security of waterproof protection and delivers dependable, trouble-free operation all at a competitive price. Easily replaces older Ongaro and Bosch-type wiper motors for a simple, yet powerful, upgrade.
Features:
Torque of 15 N-m
Two speeds
Accepts up to 24 x 24" arm and blade
Self-parking gear to left or right
Adjustable sweep angle
12V
Improved waterproof rating to IP66
Rigid aluminum housing
Insulated grounding
EMC protected
CE Approved
Additional Features:
Two sweep speeds of 35 or 55 sweeps per minute
The sweep angle can be adjusted from 40 to 110 degrees
High quality all aluminum housing dissipates heat more efficiently than plastic for longer motor life
The aluminum construction also provides better stability when mounted
The insulated grounding is suitable for use with steel, aluminum, wooden or GRP boats
Guaranteed for 3 years
|
123.41 |
|
|
Electric Windshield Wiper Switch 3-Position - 12V/24V - 4-Blade
Universal application. For stem- or bracket-mounting. 15/32”-32 thread mounting stem, with keyway.
Features:
Intermittent delay feature for permanent magnet electric wiper motors
Negative ground only
Three positions: Off/Park - Low - High • 7/16”-28 x .45” (11.3mm) mounting stem unless noted otherwise
Round black plastic, white imprinted knob with metal insert and set screw included unless noted otherwise
Controls single motor unless noted otherwise
|
17.12 |
|
|
Sun-DURA® Styled-to-Fit Boat Cover for 14.5' V-Hull Runabout Boats with Windshield & Hand/Bow Rails - Grey
*74" Max Beam Width
Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature:
1/4″ strong & durable shock cord encased into hem for a snug fit
Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover
*Trailerable boat covers must be properly installed and tied down.
From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you!
Sun-DURA®
Excellent Quality
100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA and Imported. (7 Year Limited Warranty)
Features:
Construction - Join seams are folded four-ply. No raw edges
Stitching - Double stitch construction for added strength and durability
Weather Resistant - Anti-wick thread throughout construction
Double Reinforced - Tie-down loops sewn into hem
Best Warranty in the Business - Best Warranty in the business based on fabric selection
All Carver Covers are Made in the USA
|
191.52 |
|
|
Sun-DURA® Styled-to-Fit Boat Cover for 15.5' V-Hull Runabout Boats with Windshield & Hand/Bow Rails - Grey
*80" Max Beam Width
Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature:
1/4″ strong & durable shock cord encased into hem for a snug fit
Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover
*Trailerable boat covers must be properly installed and tied down.
From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you!
Sun-DURA®
Excellent Quality
100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA and Imported. (7 Year Limited Warranty)
Features:
Construction - Join seams are folded four-ply. No raw edges
Stitching - Double stitch construction for added strength and durability
Weather Resistant - Anti-wick thread throughout construction
Double Reinforced - Tie-down loops sewn into hem
Best Warranty in the Business - Best Warranty in the business based on fabric selection
All Carver Covers are Made in the USA
|
213.70 |
|
|
Sun-DURA® Styled-to-Fit Boat Cover for 16.5' V-Hull Runabout Boats with Windshield & Hand/Bow Rails - Grey
*86" Max Beam Width
Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature:
1/4″ strong & durable shock cord encased into hem for a snug fit
Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover
*Trailerable boat covers must be properly installed and tied down.
From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you!
Sun-DURA®
Excellent Quality
100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA and Imported. (7 Year Limited Warranty)
Features:
Construction - Join seams are folded four-ply. No raw edges
Stitching - Double stitch construction for added strength and durability
Weather Resistant - Anti-wick thread throughout construction
Double Reinforced - Tie-down loops sewn into hem
Best Warranty in the Business - Best Warranty in the business based on fabric selection
All Carver Covers are Made in the USA
|
234.58 |
|
|
Sun-DURA® Styled-to-Fit Boat Cover for 17.5' V-Hull Runabout Boats with Windshield & Hand/Bow Rails - Grey
*90" Max Beam Width
Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature:
1/4″ strong & durable shock cord encased into hem for a snug fit
Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover
*Trailerable boat covers must be properly installed and tied down.
From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you!
Sun-DURA®
Excellent Quality
100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA and Imported. (7 Year Limited Warranty)
Features:
Construction - Join seams are folded four-ply. No raw edges
Stitching - Double stitch construction for added strength and durability
Weather Resistant - Anti-wick thread throughout construction
Double Reinforced - Tie-down loops sewn into hem
Best Warranty in the Business - Best Warranty in the business based on fabric selection
All Carver Covers are Made in the USA
|
250.19 |
|
|
Sun-DURA® Styled-to-Fit Boat Cover for 18.5' V-Hull Runabout Boats with Windshield & Hand/Bow Rails - Grey
*96" Max Beam Width
Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature:
1/4″ strong & durable shock cord encased into hem for a snug fit
Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover
*Trailerable boat covers must be properly installed and tied down.
From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you!
Sun-DURA®
Excellent Quality
100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA and Imported. (7 Year Limited Warranty)
Features:
Construction - Join seams are folded four-ply. No raw edges
Stitching - Double stitch construction for added strength and durability
Weather Resistant - Anti-wick thread throughout construction
Double Reinforced - Tie-down loops sewn into hem
Best Warranty in the Business - Best Warranty in the business based on fabric selection
All Carver Covers are Made in the USA
|
268.44 |
|
|
Sun-DURA® Styled-to-Fit Boat Cover for 19.5' V-Hull Runabout Boats with Windshield & Hand/Bow Rails - Grey
*96" Max Beam Width
Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature:
1/4″ strong & durable shock cord encased into hem for a snug fit
Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover
*Trailerable boat covers must be properly installed and tied down.
From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you!
Sun-DURA®
Excellent Quality
100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA and Imported. (7 Year Limited Warranty)
Features:
Construction - Join seams are folded four-ply. No raw edges
Stitching - Double stitch construction for added strength and durability
Weather Resistant - Anti-wick thread throughout construction
Double Reinforced - Tie-down loops sewn into hem
Best Warranty in the Business - Best Warranty in the business based on fabric selection
All Carver Covers are Made in the USA
|
281.47 |
|
|
Sun-DURA® Styled-to-Fit Boat Cover for 20.5' V-Hull Runabout Boats with Windshield & Hand/Bow Rails - Grey
*102" Max Beam Width
Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature:
1/4″ strong & durable shock cord encased into hem for a snug fit
Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover
*Trailerable boat covers must be properly installed and tied down.
From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you!
Sun-DURA®
Excellent Quality
100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA and Imported. (7 Year Limited Warranty)
Features:
Construction - Join seams are folded four-ply. No raw edges
Stitching - Double stitch construction for added strength and durability
Weather Resistant - Anti-wick thread throughout construction
Double Reinforced - Tie-down loops sewn into hem
Best Warranty in the Business - Best Warranty in the business based on fabric selection
All Carver Covers are Made in the USA
|
329.71 |
|
|
Sun-DURA® Styled-to-Fit Boat Cover for 21.5' V-Hull Runabout Boats with Windshield & Hand/Bow Rails - Grey
*102" Max Beam Width
Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature:
1/4″ strong & durable shock cord encased into hem for a snug fit
Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover
*Trailerable boat covers must be properly installed and tied down.
From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you!
Sun-DURA®
Excellent Quality
100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA and Imported. (7 Year Limited Warranty)
Features:
Construction - Join seams are folded four-ply. No raw edges
Stitching - Double stitch construction for added strength and durability
Weather Resistant - Anti-wick thread throughout construction
Double Reinforced - Tie-down loops sewn into hem
Best Warranty in the Business - Best Warranty in the business based on fabric selection
All Carver Covers are Made in the USA
|
358.42 |
|
|
Sun-DURA® Styled-to-Fit Boat Cover for 22.5' V-Hull Runabout Boats with Windshield & Hand/Bow Rails - Grey
*102" Max Beam Width
Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature:
1/4″ strong & durable shock cord encased into hem for a snug fit
Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover
*Trailerable boat covers must be properly installed and tied down.
From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you!
Sun-DURA®
Excellent Quality
100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA and Imported. (7 Year Limited Warranty)
Features:
Construction - Join seams are folded four-ply. No raw edges
Stitching - Double stitch construction for added strength and durability
Weather Resistant - Anti-wick thread throughout construction
Double Reinforced - Tie-down loops sewn into hem
Best Warranty in the Business - Best Warranty in the business based on fabric selection
All Carver Covers are Made in the USA
|
376.61 |
|
|
Sun-DURA® Styled-to-Fit Boat Cover for 24.5' V-Hull Runabout Boats with Windshield & Hand/Bow Rails - Grey
*102" Max Beam Width
Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature:
1/4″ strong & durable shock cord encased into hem for a snug fit
Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover
*Trailerable boat covers must be properly installed and tied down.
From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you!
Sun-DURA®
Excellent Quality
100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA and Imported. (7 Year Limited Warranty)
Features:
Construction - Join seams are folded four-ply. No raw edges
Stitching - Double stitch construction for added strength and durability
Weather Resistant - Anti-wick thread throughout construction
Double Reinforced - Tie-down loops sewn into hem
Best Warranty in the Business - Best Warranty in the business based on fabric selection
All Carver Covers are Made in the USA
|
410.51 |
|