|
Description: 316 S.S. Chain Stopper
Dimensions: L: 3-1/8" W: 2-1/2"
|
46.69 |
|
|
Hatch Handle Latch - 3-1/8" x 2-11/16"
Constructed of sand cast brass with a chrome plated finish. These Hatch Handle Latches are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Adjustable locking arm adds additional security. Installs with four #8 FH fasteners (not included). Once installed, the locking arm can be trimmed to length.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
68.57 |
|
|
Anchor Rode 30' 5/16" Chain to 300' 5/8" Nylon Brait
30 feet of 5/16 inch Chain Spliced to 300 feet of 5/8 inch Line
|
750.24 |
|
|
Stainless Steel Chain Stopper - 3/16" - 1/4"
Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the anchor while under way. Chain Stoppers mount alone or inside most bow rollers and work with your anchor roller to take tension off your windlass. Chain and rope should be secured at anchor when your windlass is not in use to avoid high loads the windlass was not designed for. 321820 fits chain sizes 3/16" - 1/4". 321825 fits chain sizes 5/16" - 3/8". Constructed of corrosion resistant formed 304 stainless steel.
|
45.78 |
|
|
Anchor Rode - 30'-5/16" Chain to 150'-5/8" Nylon Brait
30 ft. of 5/16 in. HT spliced chain to 150 ft. of 5/8 in. Nylon Brait™ rope.
Nylon Brait™ is an 8-strand nylon rope created through braid technology that yields a product with a firm strand formation yet full stowage flexibility. The unique construction offers maximum strength and energy absorption, and working windlass grip-hold.
Specifications:
Applications: Docklines and anchorlines
Construction: 8-strand Nylon
Specific Gravity: 1.14
|
493.92 |
|
|
Anchor Rode - 20'-5/16" Chain to 200'-5/8" Nylon Brait
20' of 5/16" HT spliced chain to 200' of 5/8" Nylon Brait rope
Nylon Brait™ is an 8-strand nylon rope created through braid technology that yields a product with a firm strand formation yet full stowage flexibility. The unique construction offers maximum strength and
energy absorption, and working windlass grip-hold.
Applications: Docklines and anchorlines
Construction: 8-strand Nylon
Specific Gravity: 1.14
|
518.40 |
|
|
Anchor Rode - 15'-5/16" Chain to 150'-5/8" Nylon Brait
15' of 5/16" HT spliced chain to 150' of 5/8" Nylon Brait rope
Nylon Brait™ is an 8-strand nylon rope created through braid technology that yields a product with a firm strand formation yet full stowage flexibility. The unique construction offers maximum strength and
energy absorption, and working windlass grip-hold.
Applications: Docklines and anchorlines
Construction: 8-strand Nylon
Specific Gravity: 1.14
|
400.32 |
|
|
Anchor Rode - 18'-5/16" Chain to 200'-5/8" Nylon Brait
18' of 5/16" HT spliced chain to 200' of 5/8" Nylon Brait rope
Nylon Brait™ is an 8-strand nylon rope created through braid technology that yields a product with a firm strand formation yet full stowage flexibility. The unique construction offers maximum strength and
energy absorption, and working windlass grip-hold.
Applications: Docklines and anchorlines
Construction: 8-strand Nylon
Specific Gravity: 1.14
|
501.84 |
|
|
Horn Cleat - Nylon - 98mm(3-7/8") Long
Features:
Rope Ø: 5mm(3/16")
U.V. Satbilized Nylon
|
4.27 |
|
|
March MDX-3 5/8 Pump 115V Motor 5/8" Ports
|
284.70 |
|
|
SingleViu 80mm (3-1/8") Speedometer - 140MPH
SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.
These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.
Features:
0-400kHz Default Input
RGB LED Illumination (default illumination set to White)
Water Resistant Front & Rear
Includes Wire Harness
Voltage 12-24V
Molex MX 150 8 Pin and 12 Pin Connector
Spin-Lok™ Mounting Hardware
Analog Input
∗Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
195.08 |
|
|
SingleViu 80mm (3-1/8") Speedometer - 90MPH
SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.
These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.
Features:
0-400kHz Default Input
RGB LED Illumination (default illumination set to White)
Water Resistant Front & Rear
Includes Wire Harness
Molex MX 150 8 and 12 Pin Connector
Voltage 12-24V
Spin-Lok™ Mounting Hardware
Analog Input
∗Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
195.16 |
|
|
SingleViu 80mm (3-1/8") Tachometer - 6,000 RPM
SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.
These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.
Features:
0-400kHz Default Input
RGB LED Illumination (default illumination set to White)
Water Resistant Front & Rear
Includes Wire Harness
Voltage 12-24V
Molex MX 150 8 and 12 Pin Connector
Spin-Lok™ Mounting Hardware
Analog Input
∗Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
195.08 |
|
|
SingleViu 80mm (3-1/8") Tachometer - 4,000 RPM
SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.
These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.
Features:
0-400 kHz Default Input
RGB LED Illumination (default illumination set to White)
Water Resistant Front & Rear
Includes Wire Harness
Voltage 12-24V
Molex MX 150 8 and 12 Pin Connector
Spin-Lok™ Mounting Hardware
Analog Input
∗Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
195.08 |
|
|
SingleViu 80mm (3-1/8") Speedometer - 120 KM/H
SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.
These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.
Features:
0-400kHz Default Input
RGB LED Illumination (default illumination set to White)
Water Resistant Front & Rear
Includes Wire Harness
Voltage 12-24V
Molex MX 150 8 Pin Connector
Spin-Lok™ Mounting Hardware
Analog Input
∗Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
195.08 |
|