Aluminum 8° Wedge Base for Starlink Flat High-Performance Antenna - White The Seaview Aluminium 8° Wedge Base for the Starlink Flat High-Performance antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).  *This wedge base is a direct replacement for the gray wedge base that comes with the Starlink antenna. Features: Designed to fit the Starlink Flat High-Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the cable seal that is already provided with the Starlink antenna.  No need to cut the Starlink connectors for installation. Pre-drilled with the Seaview modular top hole pattern for the option to fit on top of any Seaview modular mount.

Aluminum 8° Wedge Base for Starlink Flat High-Performance Antenna - Black The Seaview Aluminium 8° Wedge Base for the Starlink Flat High-Performance antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).  *This wedge base is a direct replacement for the gray wedge base that comes with the Starlink antenna. Features: Designed to fit the Starlink Flat High-Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the cable seal that is already provided with the Starlink antenna.  No need to cut the Starlink connectors for installation. Pre-drilled with the Seaview modular top hole pattern for the option to fit on top of any Seaview modular mount.

Gen 3 Standard Starlink Antenna Mount The Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) has been specifically designed for the harsh marine environment. If it's good for the marine environment then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-side, UTV, trucks, etc.). The base aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.  The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, marine or vehicle mounting necessitates additional support. Opting for the Seaview SRM200W Mount is a superior choice, offering a reliable and adaptable mounting solution. You have the option to utilize through-bolts for a permanent fixture through machined holes in the mount's base or pair it with the Seaview 8° Wedge base for a highly versatile installation. *The SRM200W can be mounted directly or it can be mounted to the Starlink 8° Wedge Base (SVSLWB).

Boat Outfitting Equipment and Supplies When it comes time for outfitting your boat, you can get all your boating supplies and boating accessories from us. You will never need to go anywhere else for your boat outfitting, because we have all the boat supplies you need. If you're looking for anchors/chain/rope, anodes, antifouling systems or boarding ladders, we have you covered. We can also offer you a selection of bottom paint and bow thrusters to choose from. You may also want cleaning supplies that offer deck/galley options so you can get your boat sparkling and ready to enjoy. We also have display mounts and docking accessories to complete your outfitting needs.

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

Starlink Ethernet Adapter For wired devices, this ethernet adapter makes network cable connections simple—just plug and play. It works with Starlink V2 (High Performance, Flat High Performance, and Stamdart Rectangular systems) satellite Internet systems. Allows a hard-wired Ethernet connection to the system. Applications: Required if connecting Starlink to another antenna system such as KVH’s companion configuration In a standalone configuration, allows the user to connect a device to Starlink using an Ethernet cable Engineered to facilitate a wired Internet connection by directly linking a device to the Starlink router Or use the adapter to bypass the Starlink router and set up a connection with a third-party route Advantages of Ethernet adapter wired connection (vs. Wi-Fi connection): Stability - Wired connections are typically more reliable and less subject to interference than Wi-Fi Speed - Ethernet often provides faster data transfer, particularly useful for large data activities like streaming or gaming Security - Wired data transmission is generally more secure, reducing the risk of data interception Latency - Wired connections usually have lower latency, essential for time-sensitive activities like online gaming or video calls.

4-Degree Wedge for Most Closed Dome Radars - 18"-24" - White Improve your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more! Features: Simple and Easy Installation Pre-drilled to fit your specific radar, allowing for quick and easy hassle-free installation.  Durable Made from marine-grade polymer Compatible Manufacturers: B & G Garmin Humminbird Koden Lowrance Raymarine Simrad

Center Rigger Pole Telescopes to less than 5'-6" Designed for universal use with TACO Center Riggers and other brands that accept 1-1/8" butt end diameter center riggers High performance 316 stainless springs, button and eyelets Anodized aluminum Satin/Polished Finish

8' Center Rigger Pole - Silver w/Silver Rings & Tip - 1-1/8" Butt End Diameter Features: Telescopes to less than 5'-6" Designed for universal use with TACO Center Riggers and other brands that accept 1-1/8" butt end diameter center riggers High performance 316 stainless springs, button and eyelets Anodized aluminum Satin/Polished Finish

VHF 8' QuickConnect™ 6dB for QCM Series Mounts QuickConnect™ antennas stem from the popularity of the quick connecting feature on Shakespeare's high-end Phase III® marine antennas, the QuickConnect™ product line brings you the ease of connecting and disconnecting your marine antenna in a more affordable line-up. Features: QuickConnect™ System - Screw or unscrew the antenna to disconnect or connect Splash Protection Cap - Protects the connector on the mount when the antenna is disconnected Centerpin® PL-259 Connector - An easy crimp-on connector Base connector included for use with QuickConnect™ mounts only Single Section antennas with VSWR of <1.5:1 at 156.8 MHz Maximum input power of 50W The bandwidth of 5 MHz within 2.0:1 VSWR Does not contain a built-in DC ground connection

Masterflush 8740 Macerator Toilet - 12V - White  Enjoy the upscale look and user-friendly performance of a premium residential toilet with the Dometic 8700 series of MasterFlush toilets.  The elongated seat and deep bowl provide ultimate comfort, and the high-performance macerator pump ensures thorough flushing every time while operating 30 % more efficiently than other macerator heads.  Dometic MF 8700 toilets offer a statuesque, houshold-style fixture that fits the demanding needs of luxury vehicles or vessels.  The standard-height toilet with elongated seat and residential-size bowl combines premium comfort with powerful flushing at the touch of a button.  Comes with Dometic Touchpad Flush Switch. Features: Powerful macerating flush Quieter, shorter flush duration than other macerator toilets Two flush options: Normal or Low allow efficient water consumption Standard-height toilet with residential-size bowl and elongated seat for premium comfort Through-the-floor or through-the-wall discharge fittings Electronic flush handle with chrome finish Technical Specifications: Color - White Material - Toilet - ceramic,  toilet base - ceramic Water Supply - Raw or Fresh Water  Voltage - 12 V Flush Control - MasterFlush Switch (included) Dimensions - Depth 21.5" x Height 19" x Width 14.75" Seat Height - 19" Weight - 35 Pounds Seat Close - Standard Seat Type - Enameled Wood Legacy # 304874020 *Sold as an Individual WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B45 Bronze Thru-Hull with Depth & Temperature - 8-Pin for Garmin The B45 is Airmar’s smallest, bronze, thru-hull stem, offering quality design at an economical price. The classic housing is streamlined to deflect aerated water from the transducer’s face, providing solid echo returns. Features: Bronze housing Depth and Temperature Recommended for planning-hull powerboats and cruising sailboats up to 9 m (30’) Good sensitivity in a compact housing High-performance fairing included Fast-response water-temperature sensor provides ±0.2°C (±0.1°F) accuracy Specifications: Fits: All Garmin 50/200 kHz units with 8-pin Usable Shaft Length: 92 mm (3.62 in.) Standard fairing block: 33-351-01 Frequency: 50/200 kHz Beamwidth: 50 kHz—45°, 200 kHz—12° RMS Power: 600 W Maximum Depth Range (50 kHz): 235 m to 353 m (800 ft. to 1,200 ft.)  Maximum Depth Range (200 kHz): 118 m to 206 m (400 ft. to 700 ft.) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

85mm (3-3/8") VMH-35 Multifunction Gauge The Veratron VMH 35 is engineered for single inboard or outboard engine applications.  The Veratron VMH 35 has an embedded NMEA 2000 gateway that distributes sensor data inputs such as fuel, trim, and tachometer to other devices like chartplotters.  This saves the need for an additional external converter.  Highly adaptable to a wide range of onboard networks, it's equipped with analog inputs, making it ideal for refitting with older engines. An integrated GPS makes the VMH 35 the perfect standalone navigation solution.  It integrates speed, compass, and position into the engine data information.  A dedicated Veratron IBS (Intelligent Battery System) input can provide critical 12V battery monitoring capabilities. The Veratron VMH 35 has a mineral glass front that's optically bonded to the sun-readable hybrid display.  A sleek, brushed stainless steel bezel surrounds the device and fits into classic and modern marine décors.  Because small boat consoles are often fully exposed, the round display is waterproof to IPX7 criteria, both front and back.   It fits a standard 3-3/8" panel cutout size. Features: Integrated high-performance GNSS receiver Integrated Analog to NMEA 2000 Gateway Waterproof to IPX7 Stylish black-glass design with brushed stainless-steel ring New generation sun-readable color hybrid display Intelligent Battery Sensor (IBS) port NMEA 2000® certified In the Box: VMH35 Gauge Mounting Spinlock Wire harness  Safety Instructions  *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

85mm (3-3/8") VMH-35 Multifunction Gauge with Battery Sensor The Veratron VMH 35 is engineered for single inboard or outboard engine applications.  The Veratron VMH 35 has an embedded NMEA 2000 gateway that distributes sensor data inputs such as fuel, trim, and tachometer to other devices like chartplotters.  This saves the need for an additional external converter.  Highly adaptable to a wide range of onboard networks, it's equipped with analog inputs, making it ideal for refitting with older engines. An integrated GPS makes the VMH 35 the perfect standalone navigation solution.  It integrates speed, compass, and position into the engine data information.  A dedicated Veratron IBS (Intelligent Battery System) input can provide critical 12V battery monitoring capabilities. The Veratron VMH 35 has a mineral glass front that's optically bonded to the sun-readable hybrid display.  A sleek, brushed stainless steel bezel surrounds the device and fits into classic and modern marine décors.  Because small boat consoles are often fully exposed, the round display is waterproof to IPX7 criteria, both front and back.   It fits a standard 3-3/8" panel cutout size. Features: Integrated high-performance GNSS receiver Integrated Analog to NMEA 2000 Gateway Waterproof to IPX7 Stylish black-glass design with brushed stainless-steel ring New generation sun-readable color hybrid display Intelligent Battery Sensor (IBS) port NMEA 2000® certified In the Box: VMH35 Gauge Wire harness  Mounting Spinlock Outboard Engine Kit w/IBS (B00062402) Safety Instructions *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

BURKS 20522-8, REPAIR KIT FOR CS8M Repair Kit for All CS8M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Suction Sleeve, Raceway Screws, Impeller Locknut, Shaft Key and instructions.