|
Actuator Lower Hinge Pin
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2.52 |
|
|
Actuator Lower Hinge w/Pin
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
7.87 |
|
|
Actuator Lower Hinge
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
6.94 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
Removes and installs hinge pins from all Mercury Marine drive units. Replaces: Mercury Marine 91-78310.
|
26.99 |
|
|
Boat Outfitting Equipment and Supplies
When it comes time for outfitting your boat, you can get all your boating supplies and boating accessories from us. You will never need to go anywhere else for your boat outfitting, because we have all the boat supplies you need. If you're looking for anchors/chain/rope, anodes, antifouling systems or boarding ladders, we have you covered. We can also offer you a selection of bottom paint and bow thrusters to choose from. You may also want cleaning supplies that offer deck/galley options so you can get your boat sparkling and ready to enjoy. We also have display mounts and docking accessories to complete your outfitting needs.
|
|
|
BOLT Adjustable Actuator Kit Less Tabs (Relay Module Not Included)
The BOLTBLTADJ is an electric kit designed for customers who will be utilizing their existing tabs and will be adding a helm control equipped with trim tab position indicators.
Items included are (2) 12V BOLT electric adjustable upper hinge actuators with 6-ft. cables and waterproof connectors, (2) 20-ft.wire harnesses with waterproof connectors, (2) Bennett style upper and lower hinges, (2) Lenco style upper and lower hinges, hardware and manual.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
311.74 |
|
|
Hinge Plate Only for 24" Tab
Bennett trim tab hinge plates are made of high-quality 304 stainless steel and remain strong and rigid, even in the most demanding environments. Hinge plates can be purchased individually, but they typically make up a trim plane assembly.
Features:
This hinge plate is only for a 24" tab
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
42.00 |
|
|
Boat Leveler to Bennett Actuator Conversion Kit - Hydraulic to Hydraulic
Bennett Marine's V351CK conversion kit replaces Boat Leveler cylinders with Bennett though-hull fittings.
Kit includes:
2 hydraulic cylinders and all hardware to convert your system
2 stainless steel conversion brackets
8 1/4-20 x 1/2 machine screws
4 1/4-20 x 3/4 wood screws
2 3" pipe nipples
2 female barb fittings
2 actuators
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
212.60 |
|
|
Replacement Hinge For Igloo Coolers - 3 Pack
Cooler Shield Type I Hinges are compatible with the Igloo® Universal Hinge - Item #9360. Compatible with the following cooler sizes: 28, 36, 40, 48, 54, 72, 94, 128, 162. Patented. Cooler Shield Replacement Hinges are designed to replace Igloo® factory installed hinges. Cooler Shield Hinges are guaranteed for the life of your cooler. If your Cooler Shield Hinge fail, we will replace them. Cooler Shield Hinge's unique heavy duty design and lifetime warranty differentiates them from the original factory installed cooler hinge. This improved design requires no drilling. The only tool you need is a #2 phillips screwdriver. The included Stainless Steel screws are larger than the original screws which allow re-use of the factory holes. In stock. Same Day Shipping.
The hinges are: UV resistant, food safe, recyclable, Made in USA, self lubricating, corrosion resistant. The hinge pin and screws are 316 Stainless Steel. The Igloo® compatible design is a heavy duty design that utilizes additional hole locations in the cooler body for extra strength. Hinges feature an auto stop design to a neutral rest position for the lid.
|
17.50 |
|
|
Replacement Hinge For Igloo Coolers - 2 Pack
Cooler Shield Type I Hinges are compatible with the Igloo® Universal Hinge - Item #9360. Compatible with the following cooler sizes: 28, 36, 40, 48, 54, 72, 94, 128, 162. Patented. Cooler Shield Replacement Hinges are designed to replace Igloo® factory installed hinges. Cooler Shield Hinges are guaranteed for the life of your cooler. If your Cooler Shield Hinge fail, we will replace them. Cooler Shield Hinge's unique heavy duty design and lifetime warranty differentiates them from the original factory installed cooler hinge. This improved design requires no drilling. The only tool you need is a #2 phillips screwdriver. The included Stainless Steel screws are larger than the original screws which allow re-use of the factory holes. In stock. Same Day Shipping.
The hinges are: UV resistant, food safe, recyclable, Made in USA, self lubricating, corrosion resistant. The hinge pin and screws are 316 Stainless Steel. The Igloo® compatible design is a heavy duty design that utilizes additional hole locations in the cooler body for extra strength. Hinges feature an auto stop design to a neutral rest position for the lid.
|
12.00 |
|
|
Replacement Hinge for Coleman® & Rubbermaid® Coolers - 3-Pack
Cooler Shield Type C Hinges are compatible with the Coleman® and Rubbermaid® Coolers. Cooler Shield Replacement Hinges are designed to replace Coleman® and Rubbermaid® factory installed hinges. Cooler Shield Hinges are guaranteed for the life of your cooler. If your Cooler Shield Hinge fail, we will replace them. Cooler Shield Hinge's unique heavy duty design and lifetime warranty differentiates them from the original factory installed cooler hinge. The hole positions are 1.5" on center, left to right and top to bottom. For use on the following Coleman cooler models: 5254D, 5255D, 5227B, 5240,5241, 5241A, 5245, 5848, 5896, 5850, 5250, 5278, 5293, 5298, 5299A, 6200, 6240, 6250, 6251,6260, 6262, 6263, 6270, 6273, 6286.
This model is also compatible with Gott®, and Thermos® coolers that have hinges with a square hole pattern.
The hinges are: UV resistant, food safe, recyclable, Made in USA, self-lubricating, corrosion resistant. The hinge pin and screws are 316 Stainless Steel. The Coleman® and Rubbermaid® compatible design requires no drilling and the original holes may be used. Hinges feature an auto stop design to a neutral rest position for the lid.
|
17.50 |
|
|
Replacement Hinge for Coleman® & Rubbermaid® Coolers - 2 Pack
Cooler Shield Type C Hinges are compatible with the Coleman® and Rubbermaid® Coolers. Cooler Shield Replacement Hinges are designed to replace Coleman® and Rubbermaid® factory installed hinges. Cooler Shield Hinges are guaranteed for the life of your cooler. If your Cooler Shield Hinge fail, we will replace them. Cooler Shield Hinge's unique heavy duty design and lifetime warranty differentiates them from the original factory installed cooler hinge. The hole positions are 1.5" on center, left to right and top to bottom. For use on the following Coleman cooler models: 5254D, 5255D, 5227B, 5240,5241, 5241A, 5245, 5848, 5896, 5850, 5250, 5278, 5293, 5298, 5299A, 6200, 6240, 6250, 6251,6260, 6262, 6263, 6270, 6273, 6286.
This model is also compatible with Gott®, and Thermos® coolers that have hinges with a square hole pattern.
The hinges are: UV resistant, food safe, recyclable, Made in USA, self-lubricating, corrosion resistant. The hinge pin and screws are 316 Stainless Steel. The Coleman® and Rubbermaid® compatible design requires no drilling and the original holes may be used. Hinges feature an auto stop design to a neutral rest position for the lid.
|
12.00 |
|
|
Raritan HINGES Toilet Seat+Cover Hinge Set
|
25.65 |
|
|
Git Rot Kit - 4oz
Unique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry. Apply by injecting into wood. Will soak into wood by capillary action. One-half hour pot life after mixing. Cures overnight. Sandable and paintable, can be drilled and screwed. Compatible with fiberglass resins, epoxies and most sealants. Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats.
*Note: This product is available for Ground Shipping Only
WARNING: This product can expose you to chemicals including Di-n-butyl Phthalate which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.89 |
|