|
Hydraulic Tubing - 20 foot coil
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
33.00 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
M80 Sport Tab System
Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.
Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.
Sport Tabs
Bennett's M80 and M120 Sport Tabs are ideal for trailered boats in the 17-foot to 23-foot range. Their unique Batwing design provides 30 percent more lift than conventional trim tabs and their space-saving design ensures easy installation on virtually any transom. Trim tab kits include two stainless steel trim tabs, two actuators, a hydraulic power unit, all necessary wiring, tubing, hardware and installation video.
M80: 8" x 10" for 17 foot to 20 foot boat
Includes:
(2) Trim Plane Assemblies
(2) Hydraulic Actuators
(1) Hydraulic Power Unit
(1) Control unit (or combo) including wiring
(1) Hardware Bag
(1) 20′ Hydraulic Tubing
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
606.60 |
|
|
M120 Sport Tab System
Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.
Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.
Sport Tabs
Bennett's M80 and M120 Sport Tabs are ideal for trailered boats in the 17-foot to 23-foot range. Their unique Batwing design provides 30 percent more lift than conventional trim tabs and their space-saving design ensures easy installation on virtually any transom. Trim tab kits include two stainless steel trim tabs, two actuators, a hydraulic power unit, Euro Rocker Switch, all necessary wiring, tubing, hardware and installation video.
M120: 10" x 12" for 20 foot to 23 foot boat
Includes:
(2) Trim Plane Assemblies
(2) Hydraulic Actuators
(1) Hydraulic Power Unit
(1) Control unit (or combo) including wiring
(1) Hardware Bag
(1) 20′ Hydraulic Tubing
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
650.00 |
|
|
Hydraulic Tubing - 10'
Hydraulic tubing with 10' coil
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
20.18 |
|
|
Hydraulic Tubing - 30'
Hydraulic tubing with 30' coil
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
47.66 |
|
|
12x9 Hydraulic Trim Tab System with One Box Indication
Hydraulic trim tabs are known for power, precision, and durability. Get the most from your boat, no matter what the load, speed, or sea conditions. Using the helm control, you can adjust the tabs individually or in unison to create the perfect cruising attitude. Increase speed and fuel economy, smooth a rough ride, and get on plane faster.
Features:
Get on plane fast, and stay on plane at intermediate speeds
Correct listing and uneven loads
Improve visibility and safety
Reduce pounding and eliminate porpoising
Low maintenance, long-term value, and ease of service
Exclusive transom mount interlocking tab design
Sport batwing option (M80/ M120) provides 30% more lift for limited-space installations
Bottom and piano hinge mounts are available for custom order
Kit Includes:
(2) Trim plane assemblies
(2-4) Hydraulic actuators (A1101A)
(1) Hydraulic power unit (V351HPU1)
Hydraulic tubing and hardware
One box indicator helm control
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
890.27 |
|
|
18x9 Hydraulic Trim Tab System with One Box Indication
Hydraulic trim tabs are known for power, precision, and durability. Get the most from your boat, no matter what the load, speed, or sea conditions. Using the helm control, you can adjust the tabs individually or in unison to create the perfect cruising attitude. Increase speed and fuel economy, smooth a rough ride, and get on plane faster.
Features:
Get on plane fast, and stay on plane at intermediate speeds
Correct listing and uneven loads
Improve visibility and safety
Reduce pounding and eliminate porpoising
Low maintenance, long-term value, and ease of service
Exclusive transom mount interlocking tab design
Sport batwing option (M80/ M120) provides 30% more lift for limited-space installations
Bottom and piano hinge mounts are available for custom order
Kit Includes:
(2) Trim plane assemblies
(2-4) Hydraulic actuators (A1101A)
(1) Hydraulic power unit (V351HPU1)
Hydraulic tubing and hardware
One box indicator helm control
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
942.34 |
|
|
24x9 Hydraulic Trim Tab System with One Box Indication
Hydraulic trim tabs are known for power, precision, and durability. Get the most from your boat, no matter what the load, speed, or sea conditions. Using the helm control, you can adjust the tabs individually or in unison to create the perfect cruising attitude. Increase speed and fuel economy, smooth a rough ride, and get on plane faster.
Features:
Get on plane fast, and stay on plane at intermediate speeds
Correct listing and uneven loads
Improve visibility and safety
Reduce pounding and eliminate porpoising
Low maintenance, long-term value, and ease of service
Exclusive transom mount interlocking tab design
Sport batwing option (M80/ M120) provides 30% more lift for limited-space installations
Bottom and piano hinge mounts are available for custom order
Kit Includes:
(2) Trim plane assemblies
(2-4) Hydraulic actuators (A1101A)
(1) Hydraulic power unit (V351HPU1)
Hydraulic tubing and hardware
One box indicator helm control
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
917.87 |
|
|
30x9 Hydraulic Trim Tab System with One Box Indication
Hydraulic trim tabs are known for power, precision, and durability. Get the most from your boat, no matter what the load, speed, or sea conditions. Using the helm control, you can adjust the tabs individually or in unison to create the perfect cruising attitude. Increase speed and fuel economy, smooth a rough ride, and get on plane faster.
Features:
Get on plane fast, and stay on plane at intermediate speeds
Correct listing and uneven loads
Improve visibility and safety
Reduce pounding and eliminate porpoising
Low maintenance, long-term value, and ease of service
Exclusive transom mount interlocking tab design
Sport batwing option (M80/ M120) provides 30% more lift for limited-space installations
Bottom and piano hinge mounts are available for custom order
Kit Includes:
(2) Trim plane assemblies
(2-4) Hydraulic actuators (A1101A)
(1) Hydraulic power unit (V351HPU1)
Hydraulic tubing and hardware
One box indicator helm control
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1002.00 |
|
|
18x12 Hydraulic Trim Tab System with One Box Indication
Hydraulic trim tabs are known for power, precision, and durability. Get the most from your boat, no matter what the load, speed, or sea conditions. Using the helm control, you can adjust the tabs individually or in unison to create the perfect cruising attitude. Increase speed and fuel economy, smooth a rough ride, and get on plane faster.
Features:
Get on plane fast, and stay on plane at intermediate speeds
Correct listing and uneven loads
Improve visibility and safety
Reduce pounding and eliminate porpoising
Low maintenance, long-term value, and ease of service
Exclusive transom mount interlocking tab design
Sport batwing option (M80/ M120) provides 30% more lift for limited-space installations
Bottom and piano hinge mounts are available for custom order
Kit Includes:
(2) Trim plane assemblies
(2-4) Hydraulic actuators (A1101A)
(1) Hydraulic power unit (V351HPU1)
Hydraulic tubing and hardware
One box indicator helm control
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
917.87 |
|
|
24x12 Hydraulic Trim Tab System with One Box Indication
Hydraulic trim tabs are known for power, precision, and durability. Get the most from your boat, no matter what the load, speed, or sea conditions. Using the helm control, you can adjust the tabs individually or in unison to create the perfect cruising attitude. Increase speed and fuel economy, smooth a rough ride, and get on plane faster.
Features:
Get on plane fast, and stay on plane at intermediate speeds
Correct listing and uneven loads
Improve visibility and safety
Reduce pounding and eliminate porpoising
Low maintenance, long-term value, and ease of service
Exclusive transom mount interlocking tab design
Sport batwing option (M80/ M120) provides 30% more lift for limited-space installations
Bottom and piano hinge mounts are available for custom order
Kit Includes:
(2) Trim plane assemblies
(2-4) Hydraulic actuators (A1101A)
(1) Hydraulic power unit (V351HPU1)
Hydraulic tubing and hardware
One box indicator helm control
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
994.46 |
|
|
30x12 Hydraulic Trim Tab System with One Box Indication
Hydraulic trim tabs are known for power, precision, and durability. Get the most from your boat, no matter what the load, speed, or sea conditions. Using the helm control, you can adjust the tabs individually or in unison to create the perfect cruising attitude. Increase speed and fuel economy, smooth a rough ride, and get on plane faster.
Features:
Get on plane fast, and stay on plane at intermediate speeds
Correct listing and uneven loads
Improve visibility and safety
Reduce pounding and eliminate porpoising
Low maintenance, long-term value, and ease of service
Exclusive transom mount interlocking tab design
Sport batwing option (M80/ M120) provides 30% more lift for limited-space installations
Bottom and piano hinge mounts are available for custom order
Kit Includes:
(2) Trim plane assemblies
(2-4) Hydraulic actuators (A1101A)
(1) Hydraulic power unit (V351HPU1)
Hydraulic tubing and hardware
One box indicator helm control
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1026.67 |
|
|
Boat Outfitting Equipment and Supplies
When it comes time for outfitting your boat, you can get all your boating supplies and boating accessories from us. You will never need to go anywhere else for your boat outfitting, because we have all the boat supplies you need. If you're looking for anchors/chain/rope, anodes, antifouling systems or boarding ladders, we have you covered. We can also offer you a selection of bottom paint and bow thrusters to choose from. You may also want cleaning supplies that offer deck/galley options so you can get your boat sparkling and ready to enjoy. We also have display mounts and docking accessories to complete your outfitting needs.
|
|
|
Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.
Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.
Sport Tabs
Backed by nearly 40 years of trim tab experience, Bennett Sport Tabs are engineered for the demands of offshore attitude correction. Performance boats that are run at speeds of 60 mph require the rugged construction of Sport Tabs. Manufactured with heavy gauge reinforced stainless steel and powerful hydraulic actuators, Sport Tabs combine strength, durability, and good looks to achieve your boat's maximum potential.
Items included in set :
(2) Trim plane assemblies
(2-4) Hydraulic actuators (A1101ARC)
(1) Hydraulic power unit (V351HPU1)
Hydraulic tubing and hardware
Rocker switch
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
736.73 |
|