|
Temp Sensor for Siren 3
Monitor the temperature of the cabin, engine room, bait locker, or fridge. Place the Wireless Module in the area that needs to be monitored, link the module to the Siren 3 Pro, and receive alerts if the temperature exceeds or drops below a preset level. The optional temperature probe can be used for measuring the temperature of specific equipment (e.g. engine) or hard-to-reach areas of the boat.
Features:
Compatible with Siren 3 Pro only
Includes: Wireless Sensor Module and Temperature Probe with 3 feet of wire
|
166.91 |
|
|
Battery Sensor for Siren 3
Monitor battery voltage with the Wireless Battery Sensor, and never worry about a dead battery again. Attach the Battery Connector to one of the boat’s batteries and plug the other end into the Wireless Module. Link the module to the Siren 3 Pro and receive alerts if the battery voltage exceeds or drops below a preset level. Ideal for monitoring multiple batteries on a boat.
Features:
Compatible with Siren 3 Pro only
Includes: Wireless Sensor Module and Battery Connector with 3 feet of wire
|
166.91 |
|
|
Temperature Sensor for PowerCombi
Mastervolt Temp Sensor specifically for PowerCombi.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
21.77 |
|
|
Temperature Sensor for BMV-712 Smart & BMV-702
Victron's Temperature Sensor specifically for the BMV-712 and the BMV-702.
Warranty Info
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
37.74 |
|
|
Temperature Sensor for Quattro, MultiPlus & GX Devices
A temperature sensor for MultiPlus or Quattro Inverter Charger and also GX Devices.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
24.48 |
|
|
Siren 3 Pro Vessel Management Device
Features:
Providing the ultimate smart boating experience that keeps you connected to your boat 24/7, regardless of boat size, type or use
The Siren 3 Pro provides the modern boating experience by going beyond basic marine GPS, radar & radio solutions to complement your multi-function display (MFD) with Connected Boat® Technology
Together with our easy-to-use App plus global cellular & optional satellite connectivity, our smart boat device connects you to your boat anytime, anywhere
Make your life easier by controlling your boat's lights, A/C & digital switching systems remotely from the palm of your hand
The Siren 3 Pro provides a better boating experience with remote monitoring, helping your boat stay safe, secure & ready to enjoy
Standard Features:
Battery Monitoring (Can monitor up to 2 battery banks, if additional banks are required the Siren Marine Battery Sensor will need to be added.)
GPS Position/Geofence
NMEA 2000
Digital Switching
4G LTE
Features with Add-On Sensors & Accessories:
Engine Metrics
Connected Fluid Tanks
Security/Entry
Bilge
High Water
Shore Power
Temperature
Satellite Compatible
Wireless Sensors 3.0
|
716.23 |
|
|
Entry Sensor for Siren 3
Receive instant notifications if there is unauthorized entry on the boat. Perfect for securing lockers, doors, and hatches. Install the Wireless Module on one side of the door or locker and the Open/Close Magnet on the other side. Link to the Siren 3 Pro and receive alerts when the door or locker is opened or closed.
Features:
Compatible with Siren 3 Pro only
Includes Wireless Sensor Module and Open/Close Magnet
|
166.91 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
Siren Marine's Connected Boat technology is revolutionizing the boat ownership experience by providing boat owners, fleet operators and boat builders with critical information, peace of mind, and a better boating experience.
Track your boat's position, receive alerts when critical events occur, view live video from the boat, access engine metrics, view NMEA information, and control onboard devices remotely.
Specials Closeouts Remanufactured Rebates
|
|
|
Siren Marine's Connected Boat technology is revolutionizing the boat ownership experience by providing boat owners, fleet operators and boat builders with critical information, peace of mind, and a better boating experience.
Track your boat's position, receive alerts when critical events occur, view live video from the boat, access engine metrics, view NMEA information, and control onboard devices remotely.
Specials Closeouts Remanufactured Rebates
|
|
|
Coolant Temperature Sensor - 40°C to 120°C - M16 x 1.5 Thread
Features:
Measurement Range - +40°C - 120°C
Category - Temperature Sensors
Signal Analogue - 287.4 - 22.7 Ohm
Operating Voltage - 6 - 24 V
Temperature medium - Coolant - Water - Air - Engine oil - Transmission oil - Fuel
Communication - Analog
Signal Output - 287.4 - 22.7 Ohm
Sensor Signal - Common Ground
Sensor Connector - M4 Plastic Knurled Nut
Thread - M16 X 1.5 Male
Warning Contact - None
Connector Type - M4 Kunststof Kartelmoer
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
68.10 |
|
|
120V AC Shore Power Relay - Wired
The 120VAC Shore Power Relay is used to detect presence and loss of AC shore power. The relay is meant to be hardwired directly to your AC distribution panel.
This relay is the hard wired alternative to the Siren Marine Shore Power Sensor Plug for boats with 120VAC systems.
Features:
Coil Voltage: 120VAC
Contact Current: 10A
|
83.60 |
|
|
Alternator 250 AMP Kit 12V 4" Dual Foot Saddle Dual Vee Pulley Regulator & Temp Sensor
Kit Includes: XT-DF4-250-DV Alternator, MC-618 Regulator, Temperature Sensors & Mounting Hardware
XT Series Alternator: 250A, 12V, Saddle Mount (Dual Foot), 4in, Deep Dual Vee Pulley, Case Ground
4" J-180-Style Mounting; Typical for Caterpillar, Cummins, Detroit Diesel & John Deere Engines
Replaces: AT-DF4-MC-200-KIT, AT-DF4-200-DV-KIT
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1415.74 |
|
|
Alternator 170 AMP Kit 12V 4" Dual Foot Saddle K6 Pulley Regulator & Temp Sensor
Kit Includes: XT-DF4-170-K6 Alternator, MC-618 Regulator, Temperature Sensors & Mounting Hardware
XT Series Alternator: 170A, 12V, Saddle Mount (Dual Foot), 4in, K6 Serpentine Pulley, Case Ground
Hitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre Engines
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1196.52 |
|
|
T-04MSB Bronze Thru-Hull Temp Sensor - 6-Pin
Bronze Thru-Hull Temp Sensor, 8 Meter Cable with 6-Pin Connector.
Specifications:
Housing Type: Bronze
Install Type: Thru-Hull
Features:
Bronze Thru-Hull Temperature Sensor
6-Pin Connector
8-Meter Cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
436.37 |
|