Mini Flush Mount Hi-Resolution Through-Hull Camera - CVBS, TVI, CVI, & AHD Introducing the world's smallest through hull camera, the IRIS735 machined from corrosion-resistant marine-grade 316L stainless steel and measuring only 28 mm by 59mm long. The 735 has been designed to sit flush into the hull, superstructure, or transom of your vessel to provide all-around coverage without impacting the tines of your vessel, with a bezel height of only 8.5mm. The camera module itself features a Sony Starlight sensor to provide excellent performance in low light and can be user-set to output composite (CVBS) or analog Hi-Def (TVI, CVI, AHD) video formats. When set to CVBS, the 735 is compatible with all chart plotter models that support composite video inputs. When set to TVI, the 735 will provide high-definition real-time video, which can be viewed on MFDs via our CMAC systems or fed to a TV via our IRIS995 TVI/HDMI convertor. The camera has a 140-degree wide-angle field of view, which makes it great to position along the sides and transom of your vessel to provide all-around coverage whilst docking and is also a great solution for sports fishing applications. If you are looking for a tiny, cost-effective docking camera, a sports fishing camera, or an unobtrusive camera to add to your onboard security setup, the IRIS735 is the perfect solution. The IRIS735 is also a perfect choice for robust and reliable semi-covert cameras for emergency response and law enforcement vehicles. Features: Micro-Compact Form Factor 28MM X 36MM (8MM From Panel) 316L Marine Grade, Corrosion-Proof Stainless Steel Body 4-In-1 Video Format (User Selectable) – CVBS, TVI, CVI, AHD 2.9MM Wide-Angle Lens Starlight Sensor for Superb Low Light Operation Compatible With All Chart Plotters Supporting Composite or Analog Video Compatible With CMAC and CMAC HVR Systems Set to TVI for HD TV Viewing with the IRIS995 Converter IP67 Environmental Rating Extremely Low Power Consumption Applications: Perfect for extreme environments Road traffic surveillance Monitoring dynamic digital signage Engine room monitoring Deck monitoring Fishing vessel monitoring & surveillance Emergency vehicle camera applications Animal / Food processing applications Specifications: Lens (millimeter): 2.9mm Horizontal Field of View: 140-degree HFOV Sensor (inch): 1/2.8” SONY STARVIS CMOS Sensor Resolution: CVBS: 1920 x 1080P @ 30fps (NTSC) / 25fps (PAL) / 906H in CVBS mode Minimum Resolution: 0.001 Lux (F-1.2) Day & Night Operation: Auto / Colour / Monochrome / External Video Output Modes: Analogue HD Modes: HD-TVI, HD-CVI, AHD / Analogue: Composite Video (CVBS) NTSC / PAL Lens/Field of View: 2.9mm Standard (140-degree HFOV) Shutter Speed: Auto / Manual (1/50(60) - 1/50,000 sec) Defog: Off / Auto White Balance: ATW / AWC / INDOOR / OUTDOOR / MANUAL / AWB Back Light Compensation: OFF / BLC / HSBLC D-WDR: Off / 08 SENS-UP: Off / x2 x30 DNR: Off / Low / Middle / High Brightness: 0 - 100 Motion Detection: Off / On Image Mirror: Off / Mirror / V-Flip / Rotate Sharpness: 0 10 Steps Material: 316L Marine Grade, Corrosion Resistant Stainless Steel Power: DC12V +/-10% / 125mA (1.5W) Weight: 0.1Kg Dimensions: 28mm-diameter x 58mm Environmental / EMC: EN60529 IP67 / EMC EN60945 (TBC) Operating Temperature: -10-degrees C + 50-degrees C / <90% Humidity

High Res Analogue Mini Dome Camera - Composite Video Blanking and Sync & Transport Video Interface Iris’s SX60 range of miniature marine-grade stainless steel cameras is available in multiple formats and delivers the highest quality video to suit your application. The IRIS-S060 features a multi-format 4-in-1 camera module (CVBS, TVI, CVI, and AHD) designed for maximum compatibility with most marine chart plotters, digital recorders, and monitors. The IRIS-S060 can be set to output analog video (CVBS), or a range of analog Hi-Def formats (HD-TVI, HD-CVI, and AHD), providing up to 1080P high-definition resolutions in real-time. When used with an IRIS HD switcher, HVR, or our TVI to HDMI converter, the IRIS-S060 can be connected to HD TVs and MFDs with digital inputs such as Garmin's 8000 series or Simrad's NSO series. The S060’s 316 stainless steel housing provides the ultimate protection in the harsh marine environment. It is, therefore, the perfect solution for deck monitoring aboard workboats, fishing vessels, and passenger vessels, while fitting in equally well with the high-end aesthetic of luxury vessels and mega yachts. Measuring only 58mm high by 60mm in diameter, the S060 is small enough to provide unobtrusive surveillance and also for use in areas where space is tight, such as engine rooms or anchor wells. Whether you need a high-quality and rugged camera as part of your onboard surveillance system, for engine room, deck, and companionway monitoring, or as a robust and stylish docking or backup camera, our IRIS-SX60 range of cameras is the perfect solution. Features: 3.6mm lens offering an 80-degree horizontal field of view Marine-grade 316 stainless steel rugged corrosion-free case 4-in-1 video format camera module (CVBS / TVI / CVI / AHD) high-polish finish Analogue (CVBS / composite video) resolution 1000TVL Set to TVI for 1080p HD resolution in real-time (no network latency). Built-in infrared LED illumination (10m range) Deficient power consumption IP66 Environmental Protection Applications: Workboat & commercial shipping Luxury motor yachts Fishing & sports fishing Ferry boats & passenger's vessels Law enforcement & emergency services Rapid deployment applications Vehicle & transport applications Specifications: Lens (millimeter): 3.6mm Horizontal Field of View: 80-degree HFOV Sensor (inch): 1/3” Sony CCD Sensor Resolution: 1000 TVL Interface: NA Video Processing: 1VPP CVBS Composite Video 75Ω Protocols/Video Format: PAL / NTSC Selectable Onvif: NA Bitrate: NA Illumination: 6 x 850nm infrared, 10-meter range Lens/Field of View: 3.6mm standard (80-degree HFOV) Mirroring: Horizontal & vertical configuration via the OSD menu Automatic Gain Control: Supported / multiple levels Compatibility: All MFDs with Composite Video Input, TV via AV Input Operating Temperature: -30 +60-degrees C Connections: Video: BNC 75Ω Female Connector / DC Power Socket Material: 316 Stainless Steel Power: 12VDC < 200mA Max Weight & Dimensions: 0.420Kg / 59.5mm ø x 52.93mm H Environmental: IP66

4-In-1 Flush Vertical Surface Mount  - 316L Marine Grade Stainless Steel - Recess Mount Dome Iris’ Sx76 series camera is the first of its kind designed to be installed into a bulkhead or vertical surface. Its waterproof stainless steel case is machined from marine-grade 316L stainless steel, which means it will not corrode in harsh saltwater environments, making it a great option as a backup or docking camera for boats. By mounting the camera on the sides of your boat, it can even be used when mooring alongside jetties or pontoons.  During installation, the camera’s inner ball can be adjusted and locked into position by tightening the outer bezel to achieve the desired view.  For analog or analog hi-def (such as TVI / CVI / AHD) systems, the S076 version features 1080P resolution. The camera also outputs a CVBS signal for legacy composite video systems.  As well as marine applications, the camera's tough case, and small footprint make it a perfect visibility aid for recreational vehicles, fire and rescue trucks, and other applications requiring a robust and reliable high-definition camera. The camera is certified to EN60945, EN55032, EN55035, and EN60529 (IP66) and is ONVIF compliant. For marine applications, the camera is directly compatible with Raymarine LH2 and above, Simrad, Lowrance, and B & G. For Garmin systems, use them in conjunction with Iris CMAC systems. Features: 1.8mm standard lens (160-degree horizontal field of view) Corrosion-Proof 316L Marine Grade Stainless Steel Available in 4-in-1 (CVBS, TVI, CVI, AHD) & IP formats Analogue Hi-Def resolutions up to 1920x1080P resolution IP Version - Max 3MP Hi-Def Resolution Super wide angle 160-degree lens IP version supports PoE and 12VDC - ultra-low power Built-in infrared LED illumination (10m range) EN60945, EN55032, EN55035, EN50529 (IP66) , FCC, CE Shock & vibration proof Super rugged and easy to install Applications: Perfect for extreme environments Workboats & tug boats Fishing vessels Engine room monitoring Law enforcement & military Wind farm vessels SUVs, RVs, work vehicles, and trucks Luxury vessels Passenger ferries & cruise liners Specifications: Lens (millimeter): 1.8mm Horizontal Field of View: 160-degree HFOV Sensor (inch): Sensor 1/4” CMOS Sensor Resolution: CVBS: 960H / AHD, HD-TVI. HD-CVI: 1920 x 1080 Interface: OSD Menu via in-line Joystick in Cable Tail Video Processing: Analogue / Analogue HD Protocols/Video Format: 1VPP / 75Ω composite / AHD/TVI/CVI formats Onvif: NA Bitrate: NA Illumination: 6 x 850nm Infra-Red - 10-meter range Lens/Field of View: 1.8mm Standard (160-degree HFOV) Mirroring: Horizontal & vertical configuration via the OSD  Automatic Gain Control: Supported / multiple levels Compatibility: CVBS: All MFDs / Screens featuring composite video input AHD/TVI/CVI via interface or IRIS CMAC System Operating Temperature: -30 + 60-degrees C Connections: Video: Video - 75Ω BNC female / 2.1mm DC socket Material: Marine Grade 316L Stainless Steel (highly polished as a standard) Power: +12VDC (+10 +15VDC range) / 1W Nominal / 1.8W max. (LEDs on) Power Over Ethernet (PoE): NA Weight & Dimensions: 88mm ø x 22.25mm above and below the mounting surface Environmental: EN60529 / IP66 EMC: EN55032:2015/A11:2020 & EN55035:2017/A11:2020 EN60945:2002 Sections 9 & 10 / FCC Part 15 A & B RoHS: EN6300:2018

2MP HD-TV1 IR Bullet Camera with Junction Box Features: Supports up to 2MP @ 30fps Full HD resolution over coax Supports HD-TVI, CVI, AHD, and 960H Analog IR Range: 165’ (depending on scene reflection) 12VDC Operation (power supply not included) IP67 compliant, weather-resistant Junction box included Housing color: White Megapixel: 2MP

Flush Mount Kit for echoMAP™ 4Xdv Series Make mounting your echoMAP™ sonar device quickly and easier than ever when you use the Garmin echoMAP™ Sonar 4Xdv Flush Mount Kit. Perfect for any boat, this Flush Mount Kit allows you to easily position your echoMAP™ device in the most ideal place on your power or sail boat. The Garmin echoMAP™ Sonar 4Xdv Flush Mount Kit works on most flat surfaces to ensure a successful and reliable installation. For the easiest way to prepare your echoMAP™ system for use, you'll love the detailed mounting instructions and the easy to install style offered. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Miniature Marine PTZ Dome Camera - Stainless Bezel - Hi-Resolution Analogue Sensor - 1000TVL - 4 in 1 Video Format The IRISx106 range of multi-format miniature, controllable cameras are the smallest marine PTZ cameras available on the market and provide fast, smooth variable speed control in a variety of formats to suit your requirements. The IRIS106 features a high-resolution camera sensor that can be switched to output analog (CVBS), AHD, HD-TVI, and HD-CVI video formats depending on your requirements. In analog mode (default), the camera will be connected directly to all MFDs that feature a composite video input to provide a crisp, clear video image. Set the camera to HD-TVI and connect via one of our Hybrid recorders or TVIHDMI encoders, and you will achieve 1080P high-definition video in real time, compatible with MFDs that feature digital (HDMI / DVI) inputs. The camera can be controlled by our IRIS595 joystick controller, TE01 rotary controller, or via an Iris HVR interface. Data communication to the camera is achieved via a two-wire RS485 serial data connection. The camera housing is designed to be as small as possible, simplifying installation and fitting in discreetly with the boat's aesthetic, unlike other large, unsightly marine PTZ cameras. The body of the camera is made from lightweight but tough ABS plastic, and the dome is cast from smoke acrylic. The camera housing is finished off with a marine-grade stainless steel bezel with a high polish (standard).  A surface mount bracket is also available for the camera (Part Number: BRK106) facilitating installation directly onto a bulkhead. This is often used when installing in engine rooms where it is not possible to recess mount the device. Because of its small size and sleek design, the IRIS4106 can be used for deck, companionway, tender monitoring, engine room monitoring, and as part of your onboard surveillance system. In summary, the 4106 is a very versatile, robust, and controllable marine PTZ camera. Features: Marine Grade 316 Stainless Case The smallest PTZ dome available (86 mm) Analog Huge compatibility Easy installation & low power Stylish high-polished finish Fast, responsive pan, tilt, and zoom operation Specifications: Lens (millimeter): F1.8 / F=4.9mm 49mm Image Sensor (inch): 1/3” Panasonic CMOS Image Processing: Composite Effective Pixels: 1944(H) x 1092(V) Approx 2.12M Pixels Resolution: 1000TVL Min Illumination: 0.1 Lux (Colour) / 0.01 Lux (B/W) Illumination: NA IR Distance: NA Day / Night: Auto / Day / Night S/N Ratio: >48dB  Optical Zoom: 10x Digital Zoom: 10x Wide Dynamic Range: Off / Low / Middle / High (WDR SNR 120dB) BLC: Off / BLC 3D DNR: Off / Low / Middle / High  Mirroring: Horizontal Flip / Vertical Flip AGC: 0-32 Pan Details: 360-degree Continuous Rotation / Speed 0.5300-degree sec Tilt Details: 0 90-degree / Speed 0.5300-degree sec Network: NA Protocol: PELCO-D / RS485 serial data Power over Ethernet: NA P2P: NA Smart Phone: NA Compatibility: All MFDs with Composite Video Input Max Users: NA Power: +/-12VDC Power Consumption: 0.8A Max Operating Temperature: -20-degree C + 60-degree C Dimensions (millimeter): Bezel OD = 154mm, Panel Cutout = 122mm, Depth Behind Panel = 58mm (For IRIS4106 model additional space should be allowed for RJ45 Connector), Draft = 73mm Ingress Protection: IP66 Weight: 1.1Kg Material: 316L Stainless Steel Bezel, Polycarbonate Dome, ABS Plastic Housing

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

740 IP Thru-Hull Camera Features an IP Camera to allow complete control despite no moving parts. View on your PC, Laptop, Network Display, Cell Phone, or Tablet. Control of the IP model is achieved in conjunction with Iris Centre camera management software, allowing digital pan, tilt, and zoom functionality and video recording, payback, and management. Iris Centre can handle multiple cameras and is available for download. Features: Aluminum Bronze Bezel Hard Anodised Aluminum Housing IP68 Waterproof Aluminum Housing This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

GO9 XSE Chartplotter/Fishfinder with Medium/High DownScan Transom Mount Transducer & C-MAP Discover Chart GO9 XSE Multi-function display with built-in Echosounder, GPS and Wi-Fi. Super-bright, 9" multi-touch widescreen display with NMEA 2000 and radar interface. Includes Medium / DownScan transducer Features: Easy to use, High brightness 9" tablet-style touchscreen Built-in advanced echosounder capable of displaying CHIRP, Forwardscan, Sidescan and Downscan images Radar port for connection to a Simrad solid state radar Direct Audio, Autopilot, communication and engine connection and control over NMEA2000 Built-in WiFi for mobile device mirroring and internet downloads of charting and software Easy to use multi-touch software Safely and easily navigate using your favorite cartography (Insight, Navionics, CMAP) Determine depth, bottom type and find fish using one of the many echosounder technology options Quick and simple control of entertainment systems connected on NMEA2000 Vessel circuit control when connected to a C-zone digital switching system View and monitor engine data while underway Low Profile Glass dash styling Super bright widescreen display Built-in Wi-Fi connectivity Software update notifications and downloads when connected to the internet Screen mirroring when connected to a mobile device Built-in 10 Hz GPS antenna Dual Micro SD card slot Built-in echosounder (Broadband & Chirp) Transducer required Built-in DownScan and Sidescan Imaging (HDI Transducer included) Built-in Forwardscan Imaging (transducer required) Radar port for direct connection to Simrad 3G/4G or Halo Radar scanners Operable with OP40/OP50 Remote Advanced NMEA2000 networking Easy to Use Multi-Touch Display The GO9 XSE offers true ease of use with intuitive touchscreen controls that smartphone and tablet users will find instantly familiar. Tap to create or select waypoints, pinch to zoom, or tap and drag to pan smoothly across charts. Simple home screen and menu layouts make all functions quickly accessible, with large and clearly-captioned icons that are easy to recognize and tap. Chartplotter Navigation & Waypoint Management The GO9 XSE is a full-featured chartplotter, with support for the widest available range of cartography options including C-MAP® MAX-N+, Navionics®, Insight®, Insight Genesis®, and NV Digital® Charts. Navigate confidently to destinations near and far, with the flexibility to choose charts that best fit your needs and location. Set and record those destinations easily with simple waypoint management: mark waypoints with a touch, and assign meaningful names that make it easy to look up your desired destination whether you've mapped out ten places or a thousand. Expand Your View with a Simrad Radar Solution The Simrad GO9 XSE is a full-featured radar display with plug-and-play connectivity to Simrad Broadband 3G, Broadband 4G, and Halo Pulse Compression radar systems. Cruise confidently through crowded harbors, navigate safely in poor visibility, keep an eye on distant weather cells, and find flocks of feeding birds that hint at good fishing spots. Automatic tuning helps to provide a clear radar picture in any conditions, while radar overlay combines radar data with navigational charts for an easy-to-interpret view of your surroundings. Fully Customisable Interface The Simrad GO9 XSE is fully customizable to suit your vessel and your favorite on-water activities from power boating, to fishing, to water sports. Customise your home screen with shortcuts to the features you use most, and personalize it with your choice of wallpaper. Adjustable split-screen views and customizable panel layouts let you see everything you need on-screen at once, whatever your activity. Plan Smarter with TripIntel™ Technology Designed for power boaters, TripIntel technology tracks and displays the key information you need to plan safe and enjoyable days on the water. Make smart decisions with fuel range overlaid on charts, easy access to current and future tide levels, and a detailed history of your previous trips including the route you took and how your boat performed. Built-in 10 Hz GPS receiver* With a high-speed GPS receiver updating your position ten times every second, the Simrad GO9 XSE is ideal for use aboard fast-moving RIBs and powerboats. Watch your boat's movement tracked smoothly, accurately, and in real-time, without 'jumping' from point to point on the display. Cruise Charting View Designed with power boating in mind, the Simrad GO9 XSE offers a unique Cruise Charting page that brings together crucial navigation data and charts in one easily readable display. Choose the information most relevant to your cruising style and on-water activities with the ability to edit on-screen data items. NMEA 2000® Engine Monitoring & Instrumentation The Simrad GO9 XSE connects to any NMEA 2000®-capable equipment aboard your vessel including outboard and inboard engines; fuel level and flow meters; speed, heading, and water temperature sensors; and much more. Create your own custom digital instrument displays, bringing a wealth of information to even the most crowded dash while keeping a clean look with as few gauges as possible. Watch Your Depth with Built-in Sonar Knowing the true depth beneath your hull can help you enjoy your time on the water with fewer worries, and makes it easier to locate suitable anchorages in unfamiliar waters. With built-in sonar, just add a suitable sonar transducer for accurate, real-time depth tracking. A scrollable depth history view lets you track back and easily set waypoints for promising anchorages, while StructureScan Imaging combines DownScan and SideScan sonar to offer a picture-like view of the bottom beneath your vessel. Cruise Confidently with ForwardScan Sonar Using an optional ForwardScan transducer, this forward-looking sonar technology provides a clear two-dimensional image of the bottom in front of your vessel, allowing you to navigate shallow or poorly-charted waters with confidence. With real-time updates and a forward-looking view of up to eight times your current depth, ForwardScan lets you relax and enjoy a safer day on the water. Find fish with CHIRP & StructureScan® HD sidescan imaging Whether fishing is your life or just a casual hobby, any fishing trip will benefit from the extensive array of built-in sonar technology on the Simrad GO9 XSE. Add a suitable transducer, available separately or bundled with your display, and the GO9 XSE works as a powerful fishfinder with CHIRP-enabled broadband sonar for clear detection of fish throughout the water column. With an optional HDI or Active Imaging 3-in-1,  the GO9 XSE also offers StructureScan HD sidescan imaging for a picture-like view of fish-holding structure beneath and around your boat. Simrad SonicHub®2 & Bluetooth® Audio Integration If you're not at home on the water without a good soundtrack, the Simrad SonicHub®2 marine audio system is the perfect companion to a GO9 XSE display. Stream music from Bluetooth® connected tablets, smartphones, and other mobile devices, play MP3 files from a USB flash drive, or listen to the SonicHub 2's built-in AM/FM radio. SonicHub 2 brings complete control of your audio entertainment to your GO9 XSE display, eliminating the need for a separate stereo head-unit and letting you listen to your music, your way. GoFree™ cloud enabled with Built-in Wi-Fi With Wi-Fi built-in, the Simrad GO9 XSE provides direct access to GoFree cloud services including easy wireless map downloads, software updates, and more. Whether hooked up to your home Wi-Fi with your boat trailered in the driveway, logged in to your marina's Wi-Fi, or tethered to your smartphone out on the lake, you can access GoFree cloud services anywhere you have an internet connection. On the water, GoFree connects the Simrad GO9 XSE to your mobile devices, mirroring your display's screen on your smartphone or giving you full remote control from your tablet with the free GoFree Controller app. SiriusXM Weather Integration The Simrad GO9 XSE is the only GO Series display compatible with SiriusXM Marine satellite weather, via the optional WM-4 expansion module, for real-time access to weather information right on your display. With onboard access to weather radar, surface buoy reports, NOAA Marine Zone forecasts and more, you can check out the conditions offshore before you even leave the dock. SiriusXM Marine is a subscription service, exclusively available within North America. * Built-in GPS receiver works in any bracket-mount installation, and when flush-mounted with most fibreglass hulls. When flush-mounted in a metal hulled vessel, an external GPS receiver such as the Simrad GS25 may be required. Specifications: Casing: PC/ABS Operating temp: -15°C to +55°C (+5°F to +131°F) Water ingress: IPX6 and 7 Weight (excluding mounting hardware): 1.315 kg (2.9 lbs) - GO9 XSE Screen brightness: 1200 nits Screen resolution: 480 x 800 (H x W) Viewing angle in degrees (typical value at contrast ratio = 10): L/R: 70, top: 50, bottom: 60 Operating voltage: 10 - 17 V DC Current draw at 13.6 V (sonar off, max B/L): 1 A Low power standby mode: yes Protection: reverse polarity and temporary over-voltage to 36 V Alarm output current: 1 A max Processor: iMX61 single core Conformity: CE, C-Tick NMEA 2000 (compliant):1 port (Micro-C male) -,network load 1 LEN : 1 combined port Power and NMEA 2000 (7 pin connector) Sonar 1 port (9 pin connector) Radar 1 port (5 pin Ethernet connector) Card reader: Dual microSD Comes With: 000-12728-001 - MED/HIGH 455/800 9PIN 000-13702-001 - Gimbal bracket, GO9,V9 000-13700-001 - GO9 / V9 Bezel Replacement 000-13699-001 - GO9/V9 Dash mount kit 000-00128-001 - Power Cable 000-13698-001 - GO9 XSE Suncover C-MAP Discover Chart Features Full-Featured Vector Charts Custom Depth Shading High-Resolution Bathymetry Easy-Routing Tides & Currents

GO9 XSE Combo with Transom Mount Transducer 83/200 kHz & HALO20 Package This kit combines Simrad’s GO9 XSE with Navico’s 9-Pin High-Speed Skimmer Transducer and Simrad’s HALO20 20" Radar Dome. Simrad GO9 XSE Chartplotter/Fishfinder w/C-MAP Discover Chart GO9 XSE Multi-function display with built-in Echosounder, GPS, and Wi-Fi. Super-bright, 9" multi-touch widescreen display with NMEA 2000 and radar interface.  Features: Easy to use, High brightness 9" tablet-style touchscreen Built-in advanced echosounder capable of displaying CHIRP, Forwardscan, Sidescan, and Downscan images Radar port for connection to a Simrad solid-state radar Direct Audio, Autopilot, communication, and engine connection and control over NMEA2000 Built-in WiFi for mobile device mirroring and internet downloads of charting and software Easy-to-use multi-touch software Safely and easily navigate using your favorite cartography (Insight, Navionics, CMAP) Determine depth, and bottom type and find fish using one of the many echosounder technology options Quick and simple control of entertainment systems connected to NMEA2000 Vessel circuit control when connected to a C-zone digital switching system View and monitor engine data while underway Low Profile Glass dash styling Super bright widescreen display Built-in Wi-Fi connectivity Software update notifications and downloads when connected to the internet Screen mirroring when connected to a mobile device Built-in 10 Hz GPS antenna Dual Micro SD card slot Built-in echosounder (Broadband & Chirp) (transducer required) Built-in DownScan and Sidescan Imaging (transducer required) Built-in Forwardscan Imaging (transducer required) Radar port for direct connection to Simrad 3G/4G or Halo Radar scanners Operable with OP40/OP50 Remote Advanced NMEA2000 networking Easy-to-Use Multi-Touch Display The GO9 XSE offers true ease of use with intuitive touchscreen controls that smartphone and tablet users will find instantly familiar. Tap to create or select waypoints, pinch to zoom, or tap and drag to pan smoothly across charts. Simple home screen and menu layouts make all functions quickly accessible, with large and clearly-captioned icons that are easy to recognize and tap. Chartplotter Navigation & Waypoint Management The GO9 XSE is a full-featured chartplotter, with support for the widest available range of cartography options including C-MAP® MAX-N+, Navionics®, Insight®, Insight Genesis®, and NV Digital® Charts. Navigate confidently to destinations near and far, with the flexibility to choose charts that best fit your needs and location. Set and record those destinations easily with simple waypoint management: mark waypoints with a touch, and assign meaningful names that make it easy to look up your desired destination whether you've mapped out ten places or a thousand. Expand Your View with a Simrad Radar Solution The Simrad GO9 XSE is a full-featured radar display with plug-and-play connectivity to Simrad Broadband 3G, Broadband 4G, and Halo Pulse Compression radar systems. Cruise confidently through crowded harbors, navigate safely in poor visibility, keep an eye on distant weather cells, and find flocks of feeding birds that hint at good fishing spots. Automatic tuning helps to provide a clear radar picture in any conditions, while radar overlay combines radar data with navigational charts for an easy-to-interpret view of your surroundings. Fully Customisable Interface The Simrad GO9 XSE is fully customizable to suit your vessel and your favorite on-water activities from power boating, to fishing, to water sports. Customize your home screen with shortcuts to the features you use most, and personalize it with your choice of wallpaper. Adjustable split-screen views and customizable panel layouts let you see everything you need on-screen at once, whatever your activity. Plan Smarter with TripIntel™ Technology Designed for power boaters, TripIntel technology tracks and displays the key information you need to plan safe and enjoyable days on the water. Make smart decisions with fuel range overlaid on charts, easy access to current and future tide levels, and a detailed history of your previous trips including the route you took and how your boat performed. Built-in 10 Hz GPS receiver* With a high-speed GPS receiver updating your position ten times every second, the Simrad GO9 XSE is ideal for use aboard fast-moving RIBs and powerboats. Watch your boat's movement tracked smoothly, accurately, and in real-time, without 'jumping' from point to point on the display. Cruise Charting View Designed with power boating in mind, the Simrad GO9 XSE offers a unique Cruise Charting page that brings together crucial navigation data and charts in one easily readable display. Choose the information most relevant to your cruising style and on-water activities with the ability to edit on-screen data items. NMEA 2000® Engine Monitoring & Instrumentation The Simrad GO9 XSE connects to any NMEA 2000®-capable equipment aboard your vessel including outboard and inboard engines; fuel level and flow meters; speed, heading, and water temperature sensors; and much more. Create your custom digital instrument displays, bringing a wealth of information to even the most crowded dash while keeping a clean look with as few gauges as possible. Watch Your Depth with Built-in Sonar Knowing the true depth beneath your hull can help you enjoy your time on the water with fewer worries, and makes it easier to locate suitable anchorages in unfamiliar waters. With built-in sonar, just add a suitable sonar transducer for accurate, real-time depth tracking. A scrollable depth history view lets you track back and easily set waypoints for promising anchorages, while StructureScan Imaging combines DownScan and SideScan sonar to offer a picture-like view of the bottom beneath your vessel. Cruise Confidently with ForwardScan Sonar Using an optional ForwardScan transducer, this forward-looking sonar technology provides a clear two-dimensional image of the bottom in front of your vessel, allowing you to navigate shallow or poorly charted waters with confidence. With real-time updates and a forward-looking view of up to eight times your current depth, ForwardScan lets you relax and enjoy a safer day on the water. Find fish with CHIRP & StructureScan® HD sidescan imaging Whether fishing is your life or just a casual hobby, any fishing trip will benefit from the extensive array of built-in sonar technology on the Simrad GO9 XSE. Add a suitable transducer, available separately or bundled with your display, and the GO9 XSE works as a powerful fishfinder with CHIRP-enabled broadband sonar for clear detection of fish throughout the water column. With an optional HDI or Active Imaging 3-in-1,  the GO9 XSE also offers StructureScan HD sidescan imaging for a picture-like view of the fish-holding structure beneath and around your boat. Simrad SonicHub®2 & Bluetooth® Audio Integration If you're not at home on the water without a good soundtrack, the Simrad SonicHub®2 marine audio system is the perfect companion to a GO9 XSE display. Stream music from Bluetooth® connected tablets, smartphones, and other mobile devices, play MP3 files from a USB flash drive or listen to the SonicHub 2's built-in AM/FM radio. SonicHub 2 brings complete control of your audio entertainment to your GO9 XSE display, eliminating the need for a separate stereo head unit and letting you listen to your music, your way. GoFree™ cloud enabled with Built-in Wi-Fi With Wi-Fi built-in, the Simrad GO9 XSE provides direct access to GoFree cloud services including easy wireless map downloads, software updates, and more. Whether hooked up to your home Wi-Fi with your boat trailered in the driveway, logged in to your marina's Wi-Fi, or tethered to your smartphone out on the lake, you can access GoFree cloud services anywhere you have an internet connection. On the water, GoFree connects the Simrad GO9 XSE to your mobile devices, mirroring your display's screen on your smartphone or giving you full remote control from your tablet with the free GoFree Controller app. SiriusXM Weather Integration The Simrad GO9 XSE is the only GO Series display compatible with SiriusXM Marine satellite weather, via the optional WM-4 expansion module, for real-time access to weather information right on your display. With onboard access to weather radar, surface buoy reports, NOAA Marine Zone forecasts, and more, you can check out the conditions offshore before you even leave the dock. SiriusXM Marine is a subscription service, exclusively available within North America. * Built-in GPS receiver works in any bracket-mount installation, and when flush-mounted with most fiberglass hulls. When flush-mounted in a metal hulled vessel, an external GPS receiver such as the Simrad GS25 may be required. Specifications: Casing: PC/ABS Operating temp: -15°C to +55°C (+5°F to +131°F) Water ingress: IPX6 and 7 Weight (excluding mounting hardware): 1.315 kg (2.9 lbs) - GO9 XSE Screen brightness: 1200 nits Screen resolution: 480 x 800 (H x W) Viewing angle in degrees (typical value at contrast ratio = 10): L/R: 70, top: 50, bottom: 60 Operating voltage: 10 - 17 V DC Current draw at 13.6 V (sonar off, max B/L): 1 A Low power standby mode: yes Protection: reverse polarity and temporary over-voltage to 36 V Alarm output current: 1 A max Processor: iMX61 single core Conformity: CE, C-Tick NMEA 2000 (compliant):1 port (Micro-C male) -, network load 1 LEN: 1 combined port Power and NMEA 2000 (7 pin connector) Sonar 1 port (9-pin connector) Radar 1 port (5-pin Ethernet connector) Card reader: Dual microSD Comes With: 000-13702-001 - Gimbal bracket, GO9,V9 000-13700-001 - GO9 / V9 Bezel Replacement 000-13699-001 - GO9/V9 Dash mount kit 000-00128-001 - Power Cable 000-13698-001 - GO9 XSE Suncover C-MAP Discover Chart Features Full-Featured Vector Charts Custom Depth Shading High-Resolution Bathymetry Easy-Routing Tides & Currents Navico 9-Pin High-Speed Skimmer Transducer 83/200 kHz 9-Pin High-Speed Skimmer M/H PK ASY: 83/200 kHz transom-mount skimmer depth/temp - Black 9-pin connector. Features: Transom Transducer High-Speed Skimmer 83/200kHz with Temp 9-Pin Connector Simrad HALO20 20" Radar Dome with 10M Cable Unrivalled Short-To-Mid-Range Performance Extend your view from the bow of your boat out to 24 nautical miles with pulse-compression radar technology that not only delivers a powerful mix of short and long-range detection but provides precise target definition with minimal clutter. Better Situational Awareness, Collision Avoidance HALO20 radar delivers a comprehensive range of features to enhance your situational awareness and on-water safety. Monitor selected collision hazards with MARPA target tracking, tracking up to 10 targets, or 20 in dual range. Whether you’re navigating through crowded waterways or contending with poor visibility, HALO20 radar cuts through the clutter to give you a clear and current picture of your surroundings. Ready Instantly HALO20 Radar wakes instantly from its low-power standby mode, delivering radar coverage exactly when and where you want it. Even if your HALO20 radar is completely powered down start-up is a matter of seconds, not minutes like traditional pulse radar. Easy to Use Harbor, offshore, weather, and custom modes tune HALO20 Radar’s advanced signal processing to help ensure that targets can be seen vividly – even in the toughest environmental conditions. Features: 10W Pulse Compression 24 nm range from a compact 20-inch dome Unrivalled short range Radiation safe Easy operation with harbor, offshore, and weather mode MARPA target tracking InstantOn™ Low Power Consumption Guard Zones Included: 20" dome 10m cable (000-14548-001) Ethernet Adapter Cable (000-14552-001)

GO9 XSE Combo with Transom Mount Transducer 83/200 kHz This kit combines Simrad’s GO9 XSE Chartplotter/Fishfinder with Navico’s 9-Pin High-Speed Skimmer Transducer. Simrad GO9 XSE Chartplotter/Fishfinder with C-MAP Discover Chart  GO9 XSE Multi-function display with built-in Echosounder, GPS, and Wi-Fi. Super-bright, 9" multi-touch widescreen display with NMEA 2000 and radar interface.  Features: Easy to use, High brightness 9" tablet-style touchscreen Built-in advanced echosounder capable of displaying CHIRP, Forwardscan, Sidescan, and Downscan images Radar port for connection to a Simrad solid-state radar Direct Audio, Autopilot, communication, and engine connection and control over NMEA2000 Built-in WiFi for mobile device mirroring and internet downloads of charting and software Easy-to-use multi-touch software Safely and easily navigate using your favorite cartography (Insight, Navionics, CMAP) Determine depth, and bottom type and find fish using one of the many echosounder technology options Quick and simple control of entertainment systems connected to NMEA2000 Vessel circuit control when connected to a C-zone digital switching system View and monitor engine data while underway Low Profile Glass dash styling Super bright widescreen display Built-in Wi-Fi connectivity Software update notifications and downloads when connected to the internet Screen mirroring when connected to a mobile device Built-in 10 Hz GPS antenna Dual Micro SD card slot Built-in echosounder (Broadband & Chirp) (transducer required) Built-in DownScan and Sidescan Imaging (transducer required) Built-in Forwardscan Imaging (transducer required) Radar port for direct connection to Simrad 3G/4G or Halo Radar scanners Operable with OP40/OP50 Remote Advanced NMEA2000 networking Easy-to-Use Multi-Touch Display The GO9 XSE offers true ease of use with intuitive touchscreen controls that smartphone and tablet users will find instantly familiar. Tap to create or select waypoints, pinch to zoom, or tap and drag to pan smoothly across charts. Simple home screen and menu layouts make all functions quickly accessible, with large and clearly-captioned icons that are easy to recognize and tap. Chartplotter Navigation & Waypoint Management The GO9 XSE is a full-featured chartplotter, with support for the widest available range of cartography options including C-MAP® MAX-N+, Navionics®, Insight®, Insight Genesis®, and NV Digital® Charts. Navigate confidently to destinations near and far, with the flexibility to choose charts that best fit your needs and location. Set and record those destinations easily with simple waypoint management: mark waypoints with a touch, and assign meaningful names that make it easy to look up your desired destination whether you've mapped out ten places or a thousand. Expand Your View with a Simrad Radar Solution The Simrad GO9 XSE is a full-featured radar display with plug-and-play connectivity to Simrad Broadband 3G, Broadband 4G, and Halo Pulse Compression radar systems. Cruise confidently through crowded harbors, navigate safely in poor visibility, keep an eye on distant weather cells, and find flocks of feeding birds that hint at good fishing spots. Automatic tuning helps to provide a clear radar picture in any conditions, while radar overlay combines radar data with navigational charts for an easy-to-interpret view of your surroundings. Fully Customisable Interface The Simrad GO9 XSE is fully customizable to suit your vessel and your favorite on-water activities from power boating, to fishing, to water sports. Customize your home screen with shortcuts to the features you use most, and personalize it with your choice of wallpaper. Adjustable split-screen views and customizable panel layouts let you see everything you need on-screen at once, whatever your activity. Plan Smarter with TripIntel™ Technology Designed for power boaters, TripIntel technology tracks and displays the key information you need to plan safe and enjoyable days on the water. Make smart decisions with fuel range overlaid on charts, easy access to current and future tide levels, and a detailed history of your previous trips including the route you took and how your boat performed. Built-in 10 Hz GPS receiver* With a high-speed GPS receiver updating your position ten times every second, the Simrad GO9 XSE is ideal for use aboard fast-moving RIBs and powerboats. Watch your boat's movement tracked smoothly, accurately, and in real-time, without 'jumping' from point to point on the display. Cruise Charting View Designed with power boating in mind, the Simrad GO9 XSE offers a unique Cruise Charting page that brings together crucial navigation data and charts in one easily readable display. Choose the information most relevant to your cruising style and on-water activities with the ability to edit on-screen data items. NMEA 2000® Engine Monitoring & Instrumentation The Simrad GO9 XSE connects to any NMEA 2000®-capable equipment aboard your vessel including outboard and inboard engines; fuel level and flow meters; speed, heading, and water temperature sensors; and much more. Create your own custom digital instrument displays, bringing a wealth of information to even the most crowded dash while keeping a clean look with as few gauges as possible. Watch Your Depth with Built-in Sonar Knowing the true depth beneath your hull can help you enjoy your time on the water with fewer worries, and makes it easier to locate suitable anchorages in unfamiliar waters. With built-in sonar, just add a suitable sonar transducer for accurate, real-time depth tracking. A scrollable depth history view lets you track back and easily set waypoints for promising anchorages, while StructureScan Imaging combines DownScan and SideScan sonar to offer a picture-like view of the bottom beneath your vessel. Cruise Confidently with ForwardScan Sonar Using an optional ForwardScan transducer, this forward-looking sonar technology provides a clear two-dimensional image of the bottom in front of your vessel, allowing you to navigate shallow or poorly charted waters with confidence. With real-time updates and a forward-looking view of up to eight times your current depth, ForwardScan lets you relax and enjoy a safer day on the water. Find fish with CHIRP & StructureScan® HD sidescan imaging Whether fishing is your life or just a casual hobby, any fishing trip will benefit from the extensive array of built-in sonar technology on the Simrad GO9 XSE. Add a suitable transducer, available separately or bundled with your display, and the GO9 XSE works as a powerful fishfinder with CHIRP-enabled broadband sonar for clear detection of fish throughout the water column. With an optional HDI or Active Imaging 3-in-1,  the GO9 XSE also offers StructureScan HD sidescan imaging for a picture-like view of the fish-holding structure beneath and around your boat. Simrad SonicHub®2 & Bluetooth® Audio Integration If you're not at home on the water without a good soundtrack, the Simrad SonicHub®2 marine audio system is the perfect companion to a GO9 XSE display. Stream music from Bluetooth® connected tablets, smartphones, and other mobile devices, play MP3 files from a USB flash drive or listen to the SonicHub 2's built-in AM/FM radio. SonicHub 2 brings complete control of your audio entertainment to your GO9 XSE display, eliminating the need for a separate stereo head unit and letting you listen to your music, your way. GoFree™ cloud enabled with Built-in Wi-Fi With Wi-Fi built-in, the Simrad GO9 XSE provides direct access to GoFree cloud services including easy wireless map downloads, software updates, and more. Whether hooked up to your home Wi-Fi with your boat trailered in the driveway, logged in to your marina's Wi-Fi, or tethered to your smartphone out on the lake, you can access GoFree cloud services anywhere you have an internet connection. On the water, GoFree connects the Simrad GO9 XSE to your mobile devices, mirroring your display's screen on your smartphone or giving you full remote control from your tablet with the free GoFree Controller app. SiriusXM Weather Integration The Simrad GO9 XSE is the only GO Series display compatible with SiriusXM Marine satellite weather, via the optional WM-4 expansion module, for real-time access to weather information right on your display. With onboard access to weather radar, surface buoy reports, NOAA Marine Zone forecasts, and more, you can check out the conditions offshore before you even leave the dock. SiriusXM Marine is a subscription service, exclusively available within North America. * Built-in GPS receiver works in any bracket-mount installation, and when flush-mounted with most fiberglass hulls. When flush-mounted in a metal hulled vessel, an external GPS receiver such as the Simrad GS25 may be required. Specifications: Casing: PC/ABS Operating temp: -15°C to +55°C (+5°F to +131°F) Water ingress: IPX6 and 7 Weight (excluding mounting hardware): 1.315 kg (2.9 lbs) - GO9 XSE Screen brightness: 1200 nits Screen resolution: 480 x 800 (H x W) Viewing angle in degrees (typical value at contrast ratio = 10): L/R: 70, top: 50, bottom: 60 Operating voltage: 10 - 17 V DC Current draw at 13.6 V (sonar off, max B/L): 1 A Low power standby mode: yes Protection: reverse polarity and temporary over-voltage to 36 V Alarm output current: 1 A max Processor: iMX61 single core Conformity: CE, C-Tick NMEA 2000 (compliant):1 port (Micro-C male) -, network load 1 LEN: 1 combined port Power and NMEA 2000 (7 pin connector) Sonar 1 port (9-pin connector) Radar 1 port (5-pin Ethernet connector) Card reader: Dual microSD Comes With: 000-13702-001 - Gimbal bracket, GO9,V9 000-13700-001 - GO9 / V9 Bezel Replacement 000-13699-001 - GO9/V9 Dash mount kit 000-00128-001 - Power Cable 000-13698-001 - GO9 XSE Suncover C-MAP Discover Chart Features Full-Featured Vector Charts Custom Depth Shading High-Resolution Bathymetry Easy-Routing Tides & Currents Navico 9-Pin High-Speed Skimmer Transducer 83/200 kHz 9-Pin High-Speed Skimmer M/H PK ASY: 83/200 kHz transom-mount skimmer depth/temp - Black 9-pin connector. Features: Transom Transducer High-Speed Skimmer 83/200kHz with Temp 9-Pin Connector

RealVision 3D™ Bronze Thru-Hull Transducer Pair Pack - 12° - 8M Cable & Y-Cable Designed for inboard or outboard boats, the RV-212 Bronze Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. The RV-212 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-212 system also has a built-in fast response water temperature sensor for quick, accurate readings. Raymarine’s RV-212 Bronze Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal offset to accommodate hull deadrise angles from 1° to 12°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-212 system works great on trailered boats too. The RV-212 system features rugged cast-bronze through hull bodies suitable for fiberglass or wooden hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2M pigtail, joining y-cable and 8-meter extension cable, resulting in an overall cable length of 10M (33'.) What’s in the Box? RV-212P Bronze Port Transducer with 2M cable RV-212S Bronze Starboard Transducer with 2M cable RealVision 3D Transducer Y-Cable RealVision 3D 8M (26') Transducer Extension Cable Anti-rotation bolt kit Installation instructions

RealVision 3D™ Bronze Thru-Hull Transducer Pair Pack - 20° - 8M Cable & Y-Cable Designed for inboard or outboard boats, the RV-220 Bronze Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. The RV-220 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-220 system also has a built-in fast response water temperature sensor for quick, accurate readings. Raymarine’s RV-220 Bronze Through Hull Transducer system pack contains a pair of RealVision 3D transducers with internal offset to accommodate hull deadrise angles from 13° to 20°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-220 system works great on trailered boats too. The RV-220 system features rugged cast-bronze through hull bodies suitable for fiberglass or wooden hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2M pigtail, joining y-cable and 8-meter extension cable, resulting in an overall cable length of 10M (33'.) What’s in the Box? RV-220P Bronze Port Transducer with 2M cable RV-220S Bronze Starboard Transducer with 2M cable RealVision 3D Transducer Y-Cable RealVision 3D 8M (26') Transducer Extension Cable Anti-rotation bolt kit Installation instructions

CPT-S High CHIRP Plastic Thru-Hull Flush Mount Transducer - 12° Angle The CPT-S High CHIRP transducer provides high resolution sonar imagery in a small and inexpensive package.  With a simple design, the CPT-S is easy to install, while still offering excellent performance at speed. This CPT-S is a low profile, flush-mounted plastic Thru Hull High CHIRP transducer  compatible with Raymarine's CP100 sonar module and embedded CHIRP MFD's. This single element conical CHIRP transducer provides a 25 degree fish targeting beam with a maximum depth of 900 feet. This model CPT-S accommodates hulls with a deadrise between 7-17 degrees. Also connects to Axiom Pro S series Units with optional adapter cable A80490. Features: High Chirp Sonar Max Depth: 900' 12 Degree Deadrise

CPT-S High CHIRP Plastic Thru-Hull Flush Mount Transducer - 20° Angle The CPT-S High CHIRP transducer provides high resolution sonar imagery in a small and inexpensive package.  With a simple design, the CPT-S is easy to install, while still offering excellent performance at speed. This CPT-S is a low profile, flush-mounted plastic Thru Hull High CHIRP transducer  compatible with Raymarine's CP100 sonar module and embedded CHIRP MFD's. This single element conical CHIRP transducer provides a 25 degree fish targeting beam with a maximum depth of 900 feet. This model CPT-S accommodates hulls with a deadrise between 15-25 degrees. Also connects to Axiom Pro S series Units with optional adapter cable A80490. Features: High Chirp Sonar Max Depth: 900' 20 Degree Deadrise