|
Mini Inflatable Boat Bumper
The small but mighty Mini Inflatable Bumper works great to protect your boat from dents, dings, and scratches. The mini bumper is hung vertically from the top cleat and can be suspended from the side of the boat or off the side of the dock. Works best in pairs, but just like our larger bumpers work great to protect your boat whether at a boat tie-up or while parking at the dock.
Features:
Small 22" version of the Party Bumper
10' diameter x 22" long
Hangs vertically
Great for docks, piers, and boat tie-ups
Uses Halkey Roberts inflation valve
Includes adapter for customers without HO pumps
FatSac material used UV resistant
Not to be as towable or the stop a boat at high speeds
*Sold as an Individual
|
107.99 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
Minimalist Inflatable Belt Pack - Admiral Grey - Manual
This inflatable belt pack has a discrete minimalist design for inshore paddles with friends or for skilled swimmers who are looking for a little extra safety support.
Soft exterior fabric and ergonomic construction make this PFD extremely comfortable to wear. It also includes Molle webbing to keep gear accessible and secure. Activated with a manual inflation cord.
Features:
Lightweight ergonomic fit
Inflates via manual inflation cord
Minimalist design stays out of the way until activated
Molle webbing secures essentials
Certifications:
U.S.C.G. - Harmonized Level 70
Technical Specifications:
Color - Admiral Grey
Inflation - Manual
CO2 Cylinder Size - 16 gram
Size - Universal Adult
Chest Size - 30" to 52" (76 to 132 cm)
Waist Size - 30" to 52" (76 to 132 cm)
Weight Capacity - ≥ 88 lb (≥40 kg)
*Sold as an Individual
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
119.99 |
|
|
Minimalist Inflatable Belt Pack - Azure Blue - Manual
This inflatable belt pack has a discrete minimalist design for inshore paddles with friends or for skilled swimmers who are looking for a little extra safety support.
Soft exterior fabric and ergonomic construction make this PFD extremely comfortable to wear. It also includes Molle webbing to keep gear accessible and secure. Activated with a manual inflation cord.
Features:
Lightweight ergonomic fit
Inflates via manual inflation cord
Minimalist design stays out of the way until activated
Molle webbing secures essentials
Certifications:
U.S.C.G. - Harmonized Level 70
Technical Specifications:
Color - Azure Blue
Inflation - Manual
CO2 Cylinder Size - 16 gram
Size - Universal Adult
Chest Size - 30" to 52" (76 to 132 cm)
Waist Size - 30" to 52" (76 to 132 cm)
Weight Capacity - ≥ 88 lb (≥40 kg)
*Sold as an Individual
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
119.99 |
|
|
Boat Outfitting Equipment and Supplies
When it comes time for outfitting your boat, you can get all your boating supplies and boating accessories from us. You will never need to go anywhere else for your boat outfitting, because we have all the boat supplies you need. If you're looking for anchors/chain/rope, anodes, antifouling systems or boarding ladders, we have you covered. We can also offer you a selection of bottom paint and bow thrusters to choose from. You may also want cleaning supplies that offer deck/galley options so you can get your boat sparkling and ready to enjoy. We also have display mounts and docking accessories to complete your outfitting needs.
|
|
|
Party Bumper with White Rope - Grey
Protection, versatility and ease of use. FATSAC's Party Bumper is designed to be used as way to protect your boat when anchored against other boats. The perfect solution for those crowded gathering of boats.
Comes with two (2) 5' sections of White Polypropylene rope to attach the Party Bumper to your boat.
Color options available.
Features:
Highest Quality HeyTex layered materials
UV resistant
Includes a tie down cleat on each end, 2 x 5’ foot rope extensions to hang from boat cleats. and a high pressure air valve for filling.
Double welded seams with seam tape for highest quality and strength.
Important – This is for Boat Tie Ups and Docks NOT meant to be used for towing, or to stop a boat at high speeds!
In the Box:
Party bumper
Two (2) sections of 5" White Polypropylene Rope
One Valve/Cap (W774)
*Sold as an Individual
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
237.60 |
|
|
Party Bumper with White Rope - Black
Protection, versatility and ease of use. FATSAC's Party Bumper is designed to be used as way to protect your boat when anchored against other boats. The perfect solution for those crowded gathering of boats.
Comes with two (2) 5' sections of White Polypropylene rope to attach the Party Bumper to your boat.
Color options available.
Features:
Highest Quality HeyTex layered materials
UV resistant
Includes a tie down cleat on each end, 2 x 5’ foot rope extensions to hang from boat cleats. and a high pressure air valve for filling.
Double welded seams with seam tape for highest quality and strength.
Important – This is for Boat Tie Ups and Docks NOT meant to be used for towing, or to stop a boat at high speeds!
In the Box:
Party bumper
Two (2) sections of 5" White Polypropylene Rope
One Valve/Cap (W774)
*Sold as an Individual
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
237.60 |
|
|
Specialty Inflatable Fender - 12" x 30" - Black
Inflatable Fender 12" diameter x 30" long cylinder.
Features:
Made from Black 41oz Industrial Grade Material
Special tie-down points RF welded (NOT glued)
Custom-formed D-Rings SS
12” diameter x 30” long
All made in the USA
Crafted in Milwaukee
All seams have extra welded PVC strips
Great for Big Boats, Sail Boats, Yachts, or any boat you want to keep safe
All welded seams no gluing
Extra seam tape on the welds for added strength
Fills with M3100 air pump or any tube pump
Easy to deflate and roll up for Maximum storage
Direct UV-printed logos
*IMPORTANT: Not to be used for towing or to stop a boat a high speeds or as a flotation device!
|
195.76 |
|
|
Specialty Inflatable Fender - 18" x 36" - Black
Inflatable Fender 18" diameter x 36" long cylinder.
Features:
Made from Black 41oz Industrial Grade Material
Special tie-down points RF welded (NOT glued)
Custom-formed D-Rings SS
18” diameter x 36” long
All made in the USA
Crafted in Milwaukee
All seams have extra welded PVC strips
Great for Big Boats, Sail Boats, Yachts, or any boat you want to keep safe
All welded seams no gluing
Extra seam tape on the welds for added strength
Fills with M3100 air pump or any tube pump
Easy to deflate and roll up for Maximum storage
Direct UV-printed logos
*IMPORTANT: Not to be used for towing or to stop a boat a high speeds or as a flotation device!
|
209.26 |
|
|
Specialty Inflatable Fender - 18" x 42" - Black
Inflatable Fender 18" diameter x 42" long cylinder.
Features:
Made from black 41oz Industrial Grade Material
Special tie-down points RF welded (NOT glued)
Custom-formed D-Rings SS
18” diameter x 42” long
All made in the USA
Crafted in Milwaukee
All seams have extra welded PVC strips
Great for Big Boats, Sail Boats, Yachts, or any boat you want to keep safe
All welded seams no gluing
Extra seam tape on the welds for added strength
Fills with M3100 air pump or any tube pump
Easy to deflate and roll up for Maximum storage
Direct UV-printed logos
*IMPORTANT: Not to be used for towing or to stop a boat a high speeds or as a flotation device!
|
216.00 |
|
|
Specialty Inflatable Fender Ball - 24" Diameter - Black
Inflatable Ball Fender 24” diameter sphere.
Features:
Made from Black 41oz Industrial Grade Material
Special tie-down points RF welded (NOT glued)
Custom-formed D-Rings SS
24” diameter ball
All made in the USA
Crafted in Milwaukee
All seams have extra welded PVC strips
Great for Big Boats, Sail Boats, Yachts, or any boat you want to keep safe
All welded seams no gluing
Extra seam tape on the welds for added strength
Fills with M3100 air pump or any tube pump
Easy to deflate and roll up for Maximum storage
Direct UV-printed logos
*IMPORTANT: Not to be used for towing or to stop a boat a high speeds or as a flotation ice!
|
249.76 |
|
|
Specialty Inflatable Fender Ball - 36" Diameter - Black
Inflatable Ball Fender 36” diameter sphere.
Features:
Made from Black 41oz Industrial Grade Material
Special tie-down points RF welded (NOT glued)
Custom-formed D-Rings SS
36” diameter ball
All made in the USA
Crafted in Milwaukee
All seams have extra welded PVC strips
Great for Big Boats, Sail Boats, Yachts, or any boat you want to keep safe
All welded seams no gluing
Extra seam tape on the welds for added strength
Fills with M3100 air pump or any tube pump
Easy to deflate and roll up for Maximum storage
Direct UV-printed logos
*IMPORTANT: Not to be used for towing or to stop a boat a high speeds or as a flotation device!
|
283.50 |
|
|
Storm Gard™ 5.5" x 20" Inflatable Vinyl Fender - White
Taylor Made Products introduces the latest in fender color technology. Introducing Storm Gard™ colors to our inflatable vinyl fenders. These fenders are in a class of their own, and feature all the same great qualities and Life Time Guarantee as our standard Hull Gard®, Super Gard™ and Big B™ fenders.
Integrated color agents provide added luster in sunlight.
Patented color enhancement process provides deeper richer colors.
Color matches depth of gelcoats on most boats.
Rubber football needle valve for easy inflation and long life.
Valve seats are integrally molded into the fender, not glued in like the competition.
Reinforced molded-in eyelets
Boat Size: 15' to 20'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
20.83 |
|
|
Storm Gard™ 5.5" x 20" Inflatable Vinyl Fender - Mid Atlantic Blue
Taylor Made Products introduces the latest in fender color technology. Introducing Storm Gard™ colors to our inflatable vinyl fenders. These fenders are in a class of their own, and feature all the same great qualities and Life Time Guarantee as our standard Hull Gard®, Super Gard™ and Big B™ fenders.
Integrated color agents provide added luster in sunlight.
Patented color enhancement process provides deeper richer colors.
Color matches depth of gelcoats on most boats.
Rubber football needle valve for easy inflation and long life.
Valve seats are integrally molded into the fender, not glued in like the competition.
Reinforced molded-in eyelets
Boat Size: 15' to 20'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
20.83 |
|
|
Storm Gard™ 6.5" x 22" Inflatable Vinyl Fender - White
Taylor Made Products introduces the latest in fender color technology. Introducing Storm Gard™ colors to our inflatable vinyl fenders. These fenders are in a class of their own, and feature all the same great qualities and Life Time Guarantee as our standard Hull Gard®, Super Gard™ and Big B™ fenders.
Integrated color agents provide added luster in sunlight.
Patented color enhancement process provides deeper richer colors.
Color matches depth of gelcoats on most boats.
Rubber football needle valve for easy inflation and long life.
Valve seats are integrally molded into the fender, not glued in like the competition.
Reinforced molded-in eyelets
Boat Size: 20' to 25'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
32.29 |
|