|
Convertible 2 in 1 Drink Holder sized to fit can drinks or 20 oz plastic soft drink bottles. Space saving unit conveniently opens to hold two drinks when needed. I.D. 2.9” Overall Height 4.6”. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
27.00 |
|
|
Convertible 2 in 1 Drink Holder sized to fit can drinks with insulated sleeves. Space saving unit conveniently opens to hold two drinks when needed. I.D. 3.4” Overall Height 4.6”. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
27.00 |
|
|
SnapIt! Marine P004CR Small Convertible 2 in 1 Drink Holder
This is sized to fit can drinks or 20 oz plastic soft drink bottles. Space saving unit conveniently opens to hold two drinks when needed. I.D. 2.9” Overall Height 4.5”. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
31.00 |
|
|
2-In-1 Non-Adjustable Rod Holders *2-Pack
These two rod holders have a fixed vertical angle to optimize rod positioning and a smaller size is perfect for medium and light action gear.
Features:
Rod throat opening fits most standard and ultra-light rods up to 1-3/16 inches in diameter
The locking ring fits the spinning reel handle shanks up to 7/16-inch diameter
Specifications:
Mount: Side
Color: Black
*Includes two-rod holders
|
17.57 |
|
|
Convertible 2 in 1 Drink Holder
This is sized to fit can drinks with insulated sleeves. Space saving unit conveniently opens to hold two drinks when needed. I.D. 3.6” Overall Height 4.5”. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
31.00 |
|
|
SnapIt! Marine P003 Flush Mount Pontoon Quad Drink Holder
This Quad Drink Holder is sized to fit can drinks with insulated sleeves and many mugs. The mug opening diameter is 3.625”. Interior Dimension are 3.895x8.12”. Overall Height 3.86”. Overall Width 18.4”. Cutouts on top ring can be useful for hanging sunglasses, etc.
Flush mount unit not suited for use in combination with P0011 tables. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White
|
62.00 |
|
|
SnapIt! Marine P005 Top Mount Pontoon Quad Drink Holder
Quad Drink Holder sized to fit can drinks with insulated sleeves and many mugs. Mug Opening Diameter 3.625”. Interior Dimension 3.895”(3.45” at narrowest point)x8.12”. Overall Height 3. 6”. Overall Width 18.4”. Top mount unit can be used in combination with P0011 tables. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
62.00 |
|
|
BURKS 350GA6-2-5 1/8, PUMP AND MOTOR
UNSPSC Code: 40150000
|
3792.41 |
|
|
Ultimate 2-in-1 Lounge & Caddy - Hibiscus Flip
This Aqua-Leisure lounge chair is perfect for relaxing and catching a tan.
Features:
Ultimate Comfort—lounge or tanner
The dual-position backrest lets you choose a recliner or tanner relaxation
Accessory caddy holds drinks, lotion, and more
Caddy attaches to the left or right side of the lounge
Oversized tubing evenly supports your body
Comfortable Cool Weave® mesh fabric covers the lounge and seating area, keeping you cool on the water’s surface
Convenient drink holder and carry handles
Easily inflates and deflates with the DuoLock™ Inflation System
With its wire-free design, the lounge folds for portability and storage
Inflated size is 56” L x 36” W (142cm x 91cm)
Weight capacity is 250 lbs.
Ages 15 and up
Choose Your Relaxation!
Recliner Position - Backrest Up/Caddy Out
Tanner Position - Backrest Down/Caddy In
|
32.66 |
|
|
Active Imaging 2-in-1 Transducer
Active Imaging Transducers
Active Imaging is a new scanning sonar technology that provides incredibly detailed, high resolution imaging sonar without sacrificing any range
Active Imaging transducers accomplish this by better directing the SideScan beams which increases resolution and improves range performance
Active Imaging is available in two models
The Active Imaging stand alone transducer lets the user combine the new Active Imaging transducer with a separate CHIRP transducer for dual transducer installs.
Active Imaging operates at 800kHz or 455kHz with maximum ranges of 150ft (800kHz) or 300ft (455kHz)
Active imaging Technology
Active Imaging utilizes the latest techniques in sonar signal generation
Active Imaging transducers are constructed of a polymer that reacts to sound waves more closely to water. This ensures that no sonar signal is lost during transmit or receive
Active Imaging transducers include separate sonar elements for SideScan transmit and receive Separating transmit and receive allows Active Imaging to have an incredibly fast ping speed (Ping speed directly correlates to image resolution). Additionally, these separate elements focus more of the sonar signal outwardly, increasing the sonar signal to the sides and leading to better range performance
Key Features:
Active Imaging sonar offers no compromise high resolution detail to users
800kHz operation covers many use cases and ranges.
With 800kHz range and resolution capabilities users do not need to choose between seeing in High detail or seeing far
High resolution IPS screens of NSS evo3 and HDS Live show the full image, allowing the user to see the entire underwater environment
Active Imaging transducers do not require any modules or extra hardware for use with next-generation displays
Environmental
Operating temperature: -15°C to +55°C (+5°F to +131°F)
Storage temperature: -30°C to +70°C (-22°F to +158°F)
Physical
Cable length: 7.6 m (25 ft)
Mounting options: Transom, flush step, and jackplate mounting
Connector: 9 pin
Transducer
Output: SideScan imaging, DownScan imaging and temperature
Frequency: 455 kHz and 800 kHz
Max depth: DownScan: 91 m (300 ft): SideScan: 91 m (300 ft) side range at 455 kHz, 46 m (150ft) side range at 800 kHz
Operating speed: DownScan and SideScan: 9 knots (10 mph)
|
298.80 |
|
|
Active Imaging HD™ 2-in-1 Transducer
Step up to the ultimate fishfinding clarity with new, high-definition Active Imaging™ HD 2-in-1 sonar. Get the most precise images of fish and structure from high-frequency (up to 1.2MHz) SideScan and DownScan Imaging™, plus a FishReveal™ DownScan view that makes fish easier to see below the boat.
Features:
High frequency (up to 1.2MHz) SideScan and DownScan Imaging deliver the most precise images of fish and structure
FishReveal™ DownScan view makes fish identification easy
Supports 455/800kHz and 455/1.2MHz frequencies
The perfect complement for a factory-installed CHIRP transducer
Smart transducer design boosts signal clarity
Compatible directly with Lowrance HDS PRO or with an S3100 module with HDS LIVE, HDS Carbon en Elite FS
|
286.04 |
|
|
Active Imaging 2-In-1 & 83/200 Package with Y-Cable
Active Imaging 2-in-1 Transducer
Active Imaging is a scanning sonar technology that provides incredibly detailed, high-resolution imaging sonar without sacrificing any range. Active Imaging transducers accomplish this by better directing the SideScan beams which increase resolution and improve range performance
Active Imaging is available in two models:
The Active Imaging stand-alone transducer lets the user combine the new Active Imaging transducer with a separate CHIRP transducer for dual transducer installs.
Active Imaging operates at 800kHz or 455kHz with maximum ranges of 150ft (800kHz) or 300ft (455kHz)
Active imaging Technology
Active Imaging utilizes the latest techniques in sonar signal generation
Active Imaging transducers are constructed of a polymer that reacts to sound waves more closely to the water. This ensures that no sonar signal is lost during transmit or receive
Active Imaging transducers include separate sonar elements for SideScan transmit and receive Separating transmit and receive allows Active Imaging to have an incredibly fast ping speed (Ping speed directly correlates to image resolution). Additionally, these separate elements focus more of the sonar signal outwardly, increasing the sonar signal to the sides and leading to better range performance
Features:
Active Imaging sonar offers no compromise high-resolution detail to users
800kHz operation covers many use cases and ranges.
With 800kHz range and resolution capabilities users do not need to choose between seeing in High detail or seeing far
High resolution IPS screens of NSS evo3 and HDS Live show the full image, allowing the user to see the entire underwater environment
Active Imaging transducers do not require any modules or extra hardware for use with next-generation displays
Environmental
Operating temperature: -15°C to +55°C (+5°F to +131°F)
Storage temperature: -30°C to +70°C (-22°F to +158°F)
Physical
Cable length: 7.6 m (25 ft)
Mounting options: Transom, flush step, and jack plate mounting
Connector: 9 pin
Transducer
Output: SideScan imaging, DownScan imaging, and temperature
Frequency: 455 kHz and 800 kHz
Max depth: DownScan: 91 m (300 ft): SideScan: 91 m (300 ft) side range at 455 kHz, 46 m (150ft) side range at 800 kHz
Operating speed: DownScan and SideScan: 9 knots (10 mph)
9-Pin High-Speed Skimmer Transducer 83/200 kHz
9-Pin High-Speed Skimmer M/H PK ASY: 83/200 kHz transom-mount skimmer depth/temp - Black 9-pin connector.
Features:
Transom Transducer
High-Speed Skimmer
83/200kHz with Temp
9-Pin Connector
|
394.80 |
|
|
Active Imaging 2-in-1 Transducer & 83/200 Pod In-Hull Transducer with Y-Cable
Allows for connection of an in-hull puck transducer and an Active Imaging 2-in-1 (Side/Down) transducer to the single sonar port of an Elite Ti2 or Elite FS display.
Features:
Active Imaging 2-in-1 Transom Transducer
83/200 Pod/Puck Transducer without temperature
Dual 9-pin Y-cable
|
289.30 |
|
|
Deluxe Tabletop Propane 2-in-1 Grill/Stove - 2 Burner
Cook and grill simultaneously with the Coleman® Tabletop Propane Gas Camping 2-in-1 Grill/Stove, 2-Burner.
Thanks to the Instastart™ push-button ignition system for matchless lighting, you'll be cooking with up to 20,000 total BTUs in no time. The stove surface fits a 10" pan, and the 130-square-inch grill area leaves plenty of room for grilling. WindBlock™ panels help shield your flame from wind, and they also fold down to use as side tables.
All of this in one compact design that sets up easily at the campsite, tailgate, or in your backyard.
Features:
Instastart™ push-button ignition for matchless lighting
PerfectFlow™ pressure regulator for consistent performance, even in extreme conditions
PerfectHeat™ technology for more efficient cooking with less fuel
2 adjustable burners for precise temperature control
WindBlock™ panels shield burners from wind or fold down for use as side tables
Rust-resistant aluminized steel cooktop
Easy-to-clean removable grease management tray
Technical Specifications:
Mounting Application - Tabletop
Primary Cooking Grate - 130 Sq. In. (839 sq. cm)
Number of Burners - 2
Burner BTU 20,000
Fuel Type - Propane cylinder
*Sold as an Individual
|
144.37 |
|
|
Double Drink Holder sized to fit can drinks with insulated sleeves and many mugs. Interior Dimension 3.625”(2.9” at narrowest point)x7.85”. Overall Height 3.8”. Cutout on top ring can be useful for hanging sunglasses, etc. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
29.00 |
|