4G Connect Pro 2G/3G/4G Dual Antenna Digital Yacht's 4G Connect is a 2G/3G/4G (LTE) internet access solution for use afloat.  It utilizes the latest MIMO technology with dual antennas for fast, long-range access and incorporates a full-function wifi router so multiple devices can connect wirelessly.  There is also a wired LAN port and WAN port – for connection to high-power wifi devices or satellite modems. The Pro model ships with two external hi-gain antennas for exceptional long-range performance and is the recommended solution for use afloat. 4G Connect has an easy-to-use interface. It is SIM unlocked so users are free to use any cellular provider they choose. Operation is simple – turn on, connect to the password-protected wifi hotspot that 4G Connect creates and your device is online.  Digital Yacht’s WL510 high-power wifi solution can also be connected to the WAN port for a choice between hotspot wifi and 4G connectivity.  iKommunicate can also connect to the LAN port providing boat NMEA data on the wifi network for use with navigation apps. Features: Hi-performance 4G/LTE modem for exceptional speed and range with fall back to 2G/3G SIM unlocked for any network provider Supplied with 2 x high performance external 48cm antennas for optimum speed and range 7m low loss LMR 200 cable kit included Supplied with deck base for antennas (as shown) LTE Class 3 modem offers long range and up to 70Mbps speeds The recommended solution for offshore use and non-GRP vessels Wifi interface for tablets and phones Ethernet LAN port for connection to iKommunicate navigation interface – allows boat NMEA 0183/2000 data to be available on the wifi network – ideal for smartphone and tablet navigation Ethernet WAN port can connect to satellite or WL510 high power wifi system for combination LTE/WiFi hotspot solution 12V DC operation with <5W power consumption Optional 1” base adaptor available for antennas Optional 10 & 20m LMR400 assemblies Supplied With: 7M Cable Kit

4G Connect 2G/3G/4G Internet Access 4G Connect is a new 2G/3G/4G (LTE) internet access solution for use afloat. It utilises the latest MIMO technology with dual Antennas for fast, long range access and incorporates a full function wifi router so multiple devices can connect wirelessly. There is also a wired LAN port and WAN port – for connection to high power wifi devices or satellite modems.  The Standard model has built in Antennas which are fine on most fibreglass (GRP) hulled boats and will provide good performance when in port and close to shore. For carbon fiber, wooden or metal hulled vessels, or for boat owners that want the maximum possible range, we would recommend our 4GConnect Pro model with external high gain antennas.  4G Connect has an easy to use interface and it is SIM unlocked so users are free to use any cellular provider they choose. Users in Europe are recommended to utilize a Vodafone SIM as this provides excellent maritime performance.  Operation is simple – turn on, connect to the password protected wifi hotspot that 4G Connect creates and your device is online. Digital Yacht’s WL510 high power wifi solution can also be connected to the WAN port for a choice between hotspot wifi and 4G connectivity. iKommunicate can also connect to the LAN port providing boat NMEA data on the wifi network for use with navigation apps. Features: Hi performance 4G/LTE modem for exceptional speed and range with fall back to 2G/3G  SIM unlocked for any network provider • Internal Antenna solution with MIMO technology  LTE Class 3 modem offers long range and up to 70Mbps speeds  Wifi interface for tablets and phones  Offers good performance in port on GRP boats  Ethernet LAN port for connection to iKommunicate navigation interface – allows boat NMEA 0183/2000 data to be available on the wifi network – ideal for smartphone and tablet navigation  Ethernet WAN port can connect to satellite or WL510 high power wifi system for combination LTE/WiFi hotspot solution  12V DC operation with <5W power consumption  Easy installation  Easily upgradable to PRO with purchase of external Antennas and cabling Dimensions:  380mm x 125mm x 55mm (L x W x H)  Supplied With: 1m power cable Modem/router 2 Internal Antennas

LANLink NMEA 0183 To Ethernet Gateway More and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data. LANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP/Port information. It can support multiple TCP/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data. Features: NMEA 0183 to ethernet gateway version 12/24v DC low power operation Connects to router or devices via simple RJ45 Cat 5/6 patch cable connection The web user interface for easy setup from the connected device via the browser TCP/IP or UDP connection modes –support for up to 5 connected devices with TCP/IP Bi-Directional The NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS RS232 port for PC apps too Status indicators for power, data in-out, network link, and server status Set-Up: Easy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup Configure NMEA data for 4800 or 38400 baud and set mode (TCP/IP or UDP) and port Set up with fixed or dynamic IP address Status page for system diagnostics Specifications: Power: 10-35V DC (Consumption approx. 50mA at 12V DC) Network Port: Ethernet RJ45 10/100MB IP Mode: Static or DHCP Operating Mode *TCP/IP or UDP; Support for up to 5 connected devices in TCP/IP mode; *Recommended mode of operation NMEA Input: Configurable 4800 or 38400 baud (NMEA 0183) NMEA 2000 option via iKonvertgateway Operating temp: -25 to +70 degrees C LED Indicators: Power -Status -Link -Data In -Data Out Options: RS232 connectivity (non-concurrent with NMEA) Dimensions (W x H): 95mm x 86mm

LANLink NMEA 2000 To Ethernet Gateway More and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data. LANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP/Port information. It can support multiple TCP/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data. *This version ships with an iKonvertNMEA Certified gateway Features: NMEA 2000 to ethernet gateway version The NMEA 2000 version ships with an iKonvertNMEA Certified gateway for easy connection to the NMEA 2000 backbone (easily configurable for multiple installation options) 12/24v DC low power operation Connects to router or devices via simple RJ45 Cat 5/6 patch cable connection Web user interface for easy setup from the connected device via browser TCP/IP or UDP connection modes –support for up to 5 connected devices with TCP/IP Bi-Directional The NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS RS232 port for PC apps too Status indicators for power, data in-out, network link, and server status Set-Up: Easy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup Configure NMEA data for 4800 or 38400 baud and set mode (TCP/IP or UDP) and port Set up with fixed or dynamic IP address Status page for system diagnostics Specifications: Power: 10-35V DC (Consumption approx. 50mA at 12V DC) Network Port: Ethernet RJ45 10/100MB IP Mode: Static or DHCP Operating Mode *TCP/IP or UDP; Support for up to 5 connected devices in TCP/IP mode; *Recommended mode of operation NMEA Input: Configurable 4800 or 38400 baud (NMEA 0183) NMEA 2000 option via iKonvertgateway Operating temp: -25 to +70 degrees C LED Indicators: Power -Status -Link -Data In -Data Out Options: RS232 connectivity (non-concurrent with NMEA) Dimensions (W x H): 95mm x 86mm

Wi-Fi Booster for 4GXtream 4GXtream is the latest, premium LTE (cellular) internet access onboard product with an NMEA 2000 interface.  It ships as a complete package with dual external antennas, deck mounting hardware, and cabling.  Alternative antenna mounts are available as options. Using MIMO technology and two external wide band LTE antennas, it offers fast connectivity at up to 300 MBs (network dependent).  It has a built-in dual band wifi router supporting multiple connections, dual SIM slots (with auto fail-over if required), built-in GPS (for IOT and tracking applications) as well as an NMEA 2000 interface for navigation and instrument data connectivity and wireless interfacing.  There’s also a Bluetooth interface for future connectivity applications. It will sit alongside our existing 4G Connect Pro as a premium product and is ideal for use on large yachts, workboats, tugs, and commercial ships where reliable, low-cost coastal internet and in-port connectivity are required. 4GXtream features independent dual band (2.4 & 5GHz) wifi for interconnection to mobile devices.  This also provides the connectivity for NMEA data so apps on mobile devices can utilize the boat's navigation and instrumentation data. For external hi-power wifi (to access shoreside hotspots) our booster WiFi kit is recommended which connects to the WAN port.  4GXtream can then act as a router for this connection and allow the user to switch from wifi to LTE. Features: Latest Cat 6 LTE MIMO technology with a range of up to 25NM offshore (network dependent) Dual SIM slots with auto fail-over or manual selection Two external, high gain, wide bandwidth antennas Dual-band integrated wifi router (2.4 & 5 GHz) – independently configurable Built in NMEA 2000 interface to transmit NMEA 2000 data over the wireless and wired network to compatible apps Built in GPS with external patch antenna for IOT and tracking applications Built in Bluetooth with antenna for future applications 3 x LAN ports 1 x WAN port for additional internet connectivity – eg: WL510 high power wifi system Digital input/output connectivity for IOT/control applications (Available Q3 2021) SMS addressable

4G Xtream Internet & NMEA 2000 Solution Digital Yacht's 4G Xtream is the latest, premium LTE (cellular) Internet access product. It ships as a complete package with dual external antennas, deck mounting hardware, and cabling. Alternative antenna mounts are available as options. Using MIMO technology and two external wideband LTE antennas, it offers fast connectivity at up to 300 MBs (network dependent). It has a built-in dual-band wifi router supporting multiple connections, dual SIM slots (with auto-failover if required), built-in GPS (for IOT and tracking applications) as well as an NMEA 2000 interface for navigation and instrument data connectivity and wireless interfacing. There’s also a Bluetooth interface for future connectivity applications. Features: Latest Cat 6 LTE MIMO technology with a range up to 25NM offshore (network dependent) Dual SIM slots with auto-failover or manual selection Two external, high gain, wide bandwidth antennas Dual-band integrated wifi router (2.4 & 5 GHz) –independently configurable Built-in NMEA 2000 interface to transmit NMEA 2000 data over the wireless and wired network to compatible apps Built-in GPS with external patch antenna for IOT and tracking applications Built-in Bluetooth with antenna for future applications 3 x LAN ports 1 x WAN port for additional internet connectivity –eg: WL510 high power wifi system Digital input/output connectivity for IOT/control applications (Available Q4 2021) SMS addressable

AIT2000 Class B **As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form. ** Click here to download form. The AIT2000 uses the latest AIS Transponder technology to squeeze more performance and interfacing options in to a housing that is half the size of our previous generation transponder. This ultra-compact Class B Transponder has three outputs; NMEA 0183, NMEA 2000 and USB connection, allowing it to work with every AIS compatible chart plotter or software package on the market today. Featuring a remote silence button option, two NMEA 0183 Inputs and Outputs, four status LEDs and rugged vibration-proof mounting brackets, the AIT2000 is the third generation of Digital Yacht AIS transponder and replaces the very popular AIT1000. Configuration of your vessel's fixed data, such as MMSI, call sign, boat name, dimensions etc. is made easy with the included Windows and Mac compatible proAIS2 software. Once configured, the unit will provide AIS data to a PC or Mac running suitable navigation software or a dedicated chart plotter, such as the latest Garmin, Raymarine, Navico, Standard Horizon and Furuno units. As well as transmitting your own vessel's position so that other AIS equipped vessels know where you are, the AIT2000, when connected to an existing VHF antenna (via a splitter) or dedicated AIS antenna, will receive all AIS targets within range of your boat - typically up to 30NM. With two industry standard NMEA 0183 outputs, our own N2Net connector for plugging in to an NMEA 2000 network and a simple plug and play USB connection to a PC, the AIT2000 is the perfect AIS transponder solution for all light marine vessels up to 300 tons. Features: Latest generation AIS technology - featuring a brand new AIS transponder (Class B) design Ideal for use with existing plotter and radar systems Built-in high performance 50 channel GPS receiver (ideal also as a backup GPS) USB Interface for simple plug and play connection to a PC or Mac Includes N2Net interface and cable for connection to NMEA 2000 network High speed NMEA output (38,400 baud) - compatible with industry standard plotters Comes complete with GPS antenna with integral 1"x14TPI thread monut Requires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter (SPL250) Remote Silence Switch option Easy to install black box solution NOTE - AIS target range, like VHF range is dependent upon a number of installation factors such as; antenna gain, antenna height and size of ground plane. Ranges in excess of 20 miles should be possible if all of these factors are perfect. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  DIGITAL YACHT - NEW PRODUCT ALERT!    Digital Yacht has introduced the GPS160, high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.   TriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure and more.     NEW! Galileo GNSS   The GPS160 supports GPS, Glonass and Galileo positioning. TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.     MOB Features:   -GPS160 accepts an external switch inpu to activate internal MOB function -Position is automatically saved and GPS160 calculates and outpus a "synthetic" AIS MOB NMEA sentence allowing compatible plotters to mark the MOB position automatically - just as if an AIS SART had been activated -Easily installed with a simple push button switch or for connection to outboard kill switch and tether -Can also function with 3rd party wireless MOB systems with any switched alarm output      Digital Yacht is all about next generation navigation, communication and entertainment systems for your boat. Boating should be fun, safe and easy and Digital Yacht products integrate into existing and new boat networks to bring a powerful dimension to your onboard electronics.     Specials    Closeouts   Remanufactured    Rebates

5G Xtream System with 3 Antennas & 7M Cable For boat owners looking for ultra-fast internet on board, the new 5G Xtream from Digital Yacht offers 4G and 5G connectivity as well as integration with Starlink satellite systems for the best and most affordable blended internet afloat. The 5G Xtream can support 5G (shoreside) connection speeds up to 3.1GB/s but also integrates a 4G Cat 20 modem, which offers connectivity up to about 25NM from shore at speeds of up to 2GB/s. The system uses three external antennas with dual high-gain vertical antennas and a separate compact dome for the higher 5G frequencies. This MIMO technology and, critically, separate antennas give optimum performance. There’s support for dual SIMs with auto (failover) or manual switching between operators. The 5G Xtream features dual-band (2.4 and 5GHz) wireless connections, so users on board simply search for the secure wifi point and connect. There are also 4 LAN ports (10/100/1000 MB) for wired devices like smart TVs and a WAN port that is optimized for Starlink satellite connectivity, allowing the 5GX to act as a sophisticated and fast router for all on-board internet communications. The Wi-Fi router can also be configured to access marina wifi hotspots as an additional method of internet access. This also supports the very latest 5GHz marina wifi services, and there's also a high-gain external wifi antenna available as an accessory. For advanced users, the 5G Xtream allows for user management, VPNs, blacklists, and IOT applications. NMEA 0183/2000 data can also be connected using Digital Yacht’s LANLink devices. The integrated GPS allows for SMS reporting of boat position or even a geofence/drift setting when the boat is at anchor or in port. The Digital Yacht 5G Xtream is supplied as a complete solution with antennas, mounts, and cabling – all that’s additionally required is a cellular SIM. Configuration Configuration is very simple. Just insert the SIM cards. The 5G Xtream has two standard SIM slots, and it is possible to fit two SIMs from two different network operators. By default, the 5G Xtream will query the SIM that is installed and automatically select the APN settings from its internal database. However, it is very important that users “lockdown” their wireless network with their network name (SSID) and wireless password. This task only takes a couple of minutes and is done via the 5G Xtream web interface. User Interface Accessing 5G Xtream functionality is done via an easy web interface. Any locally connected device can simply enter the IP address into the password-protected interface to set up functions, view traffic and logs, and configure wifi. Once set up, there should be no requirement to log in other than for diagnostics and configuration. Users simply access the internet through the wifi connection, just as they would in the home or office. Features: Ultra-fast 5G internet afloat solution with speeds up to 3.1GBs plus also integrates the latest 4G Cat 20 LTE MIMO technology with a range up to 25NM offshore (network dependent) and 4G connection speeds up to 2GBs Dual SIM slots with auto-failover or manual selection Two external, high-gain, wide-bandwidth antennas plus a compact high-gain dome antenna for higher 5G frequencies Dual-band integrated wifi router (2.4 & 5 GHz)—independently configurable Built-in GPS with an external patch antenna for IOT and tracking/anchor alarm applications 4 x LAN ports 1 x WAN port for additional internet connectivity, optimized for Starlink satellite systems Digital input/output connectivity for IoT/control applications SMS capability 12/24v Weight: 3800 g Dimensions: 180 x 125 x 55 mm operation Specifications: Operating Temperature: -40 to +75 degrees C Dimensions: 180 x 125 x 55mm (excluding antennas) Weight: 3,8 kg Protection: IPX4 Technology: 5G Sub-6Ghz SA/NSA. Up to 2.1/3.3Gbps downlink (4×4 MIMO); 4G (LTE) CAT 20 up to 2GB/s 5G/LTE: 5G Sub-6Ghz SA/NSA. Up to 2.1/3.3Gbps downlink (4×4 MIMO); 4G (LTE) CAT 20 up to 2GB/s 3G/4G Fallback (Support bands): 5G (NSA): n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77; 5G (SA): n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77, n78; 4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28, B32; 4G (LTE-TDD): B38, B40, B41, B42, B43 4G & 5G Antennas: Dual Wi-Fi band independent 2.4 & 5 GHz (maximum 150 connections); dual 48cm external wideband high gain MIMO supplied with 7-meter cables and mounting bases. (10 & 20m options available) PLUS additional 100mm dome antenna for 4 x 4 MIMO operation and optimized for 5G (7m cable only) Interfaces: 4 x LAN 10/100 Ethernet Port; 1 x WAN 10/100 Ethernet Port ; WiFi; 802.11 b/g/n/ac What’s in the Box? 1 x 5G Xtream Modem Unit 1 x DC Power/IO cable 2 x External antennas 2 x E179F antenna bases 2 x 7m LMR200 antenna cables (N male to N male) 1 x 5G dual element dome antenna with pole/1” adaptor mount and integrated 7m cables 2 x Internal wifi antennas 1 x Internal GPS antenna Options (sold separately): 1” antenna adaptors and range of mounts 10 & 20m LMR400 antenna cable packs for 4G antennas AC 110/220v power adaptor 4GXWL hi power external wifi option LANLink NMEA 0183/2000 interface

Super Halo Cell Booster - AT&T, T-Mobile, Verizon - 2G,3G & 4G The Super HALO is a marine grade 2G, 3G and 4G voice and data cellular reception solution. Its 5-band compatibility makes it compatible with AT&T, T-Mobile and Verizon networks. The Super HALO is optimized to boost cellular reception for your boat, car, recreational vehicle, home or AnyWhere® else, with support of 10+ users simultaneously and an indoor antenna to direct the signal where you really need it. Features: Five band - Works with AT&T, T-Mobile and Verizon 2G, 3G, & 4G networks Stealth technology - Uplink becomes dormant while not in use to save power Automatic gain control (AGC) - Does not overpower or interfere the cell sites Automatic shutdown - Energy efficient and does not interfere with the cell sites Manually adjustable gain - Flexibility in antenna placement and fine-tuning the system High quality metal construction - Durable and resilient FCC certified - Safe and legal Specifications Frequency- Uplink (Downlink) MHz 698-716 (728-746) / 776-787 (746-757) / 824-849 (869-894) / 1850-1915 (1930-1995) / 1710-1755 (2110-2155) Input / Output Impedance 50ohm Maximum Gain 50dB VSWR ≤ 2.0 Standard Supported CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards Throughput 100+ Mbps Noise Figure 5dB Connectors FME Male (both ends) Power Supply / Consumption 5-15VDC, 2.1A Max. @ 12 VDC Dimensions 7-7/8 in x 5 in x 1-3/16 in (20cm x 12.7cm x 8.09cm) Weight 2lbs 3oz (1.04kg) RoHS Compliant Yes FCC ID (USA) RSNMOBILE5

Class A AIS Bundle with Free CX4A AIS Antenna CLA2000 Deep Sea Class A AIS Transponder Digital Yacht’s CLA2000 is the ultimate SOLAS and inland waterway globally approved Class A AIS transponder. Water and weather proof to IP67, it has a full integrated 5” hi-res colour display supporting a wide range of functionality including electronic chart navigation with optional C-Map MAX charting and AIS target management. Proven, superior real world AIS message receive and transmit and message processing performance is delivered by advanced core SDR AIS technology. This state of the art technology ensures you see more targets, more of the time and at maximum range. The CLA2000 will find applications on SOLAS mandated vessels over 300GRT as well as workboats, rescue services, inland waterways users, RIBs, large yachts and any user wanting premium AIS performance and safety. The CLA2000 has optimised software for detecting AIS SART and MOB devices with a dedicated icon for this class of AIS. An automatic alarm is activated on detection of an AIS SART beacon activation. The target plot display will also calculate relative bearing of the device for easy visualisation of the target and rescue. The CLA2000 is fitted with a micro SD card reader located behind a waterproof cover on the front panel. This can support software updates, data logging of AIS and position data to a blank card as well as compatibility with C- Map MAX charting cards for optional detailed back ground charting. The CLA2000 has an integrated wireless interface for sending AIS and position data to smart phones, tablets, PCs and MACs for use with 3rd party charting and navigation apps. It supports client mode where it can connect to an existing wireless network or AP mode where devices can connect directly to the CLA2000. Up to 5 simultaneous/connected devices are possible. Features: Globally approved Class A AIS transponder High resolution, 800 x 480 pixel 5” colour display (MKD) with easy to use, fast user interface Bracket or flush mount – waterproof to IPX7 Integrated GPS with external antenna or utilise external NMEA feed (user selectable) 3 x NMEA 0183 interface (bi-directional for plotter, ECDIS, radar etc) 3 x sensor input ports (eg BlueBoard, external GNSS, gyro etc) NMEA 2000 interface Built in SD card slot for software updates, AIS data port logging or C-Map MAX mapping capability with optional C-Map data card Built in wi-fi for connection to iPads and tablets for wireless navigation Sophisticated AIS SART MOB alarm and display capability User programmable alarms for CPA and TCPA Advanced filtering of targets External alarm and remote silence switch capability CX4A Commercial AIS/VHF Antenna Powerful AIS Tuned commercial VHF Antenna that will give you maximum AIS range. Has a SO239 antenna connector in the base of the Antenna and we recommend using this with low loss 50 ohm coax cable such as RG-213 for best performance (not supplied), particularly on long cable runs. A very high quality 3dB AIS tuned GRP antenna which is ideal for professional and super yacht installation. Specifications: 3dB AIS tuned GRP antenna 4ft long Fit 1.25″ commercial grade fixing bases

CLA2000 Deep Sea Class A AIS Transponder Digital Yacht’s CLA2000 is the ultimate SOLAS and inland waterway globally approved Class A AIS transponder. Water and weather proof to IP67, it has a full integrated 5” hi-res colour display supporting a wide range of functionality including electronic chart navigation with optional C-Map MAX charting and AIS target management. Proven, superior real world AIS message receive and transmit and message processing performance is delivered by advanced core SDR AIS technology. This state of the art technology ensures you see more targets, more of the time and at maximum range. The CLA2000 will find applications on SOLAS mandated vessels over 300GRT as well as workboats, rescue services, inland waterways users, RIBs, large yachts and any user wanting premium AIS performance and safety. The CLA2000 has optimised software for detecting AIS SART and MOB devices with a dedicated icon for this class of AIS. An automatic alarm is activated on detection of an AIS SART beacon activation. The target plot display will also calculate relative bearing of the device for easy visualisation of the target and rescue. The CLA2000 is fitted with a micro SD card reader located behind a waterproof cover on the front panel. This can support software updates, data logging of AIS and position data to a blank card as well as compatibility with C- Map MAX charting cards for optional detailed back ground charting. The CLA2000 has an integrated wireless interface for sending AIS and position data to smart phones, tablets, PCs and MACs for use with 3rd party charting and navigation apps. It supports client mode where it can connect to an existing wireless network or AP mode where devices can connect directly to the CLA2000. Up to 5 simultaneous/connected devices are possible. Features: Globally approved Class A AIS transponder High resolution, 800 x 480 pixel 5” colour display (MKD) with easy to use, fast user interface Bracket or flush mount – waterproof to IPX7 Integrated GPS with external antenna or utilise external NMEA feed (user selectable) 3 x NMEA 0183 interface (bi-directional for plotter, ECDIS, radar etc) 3 x sensor input ports (eg BlueBoard, external GNSS, gyro etc) NMEA 2000 interface Built in SD card slot for software updates, AIS data port logging or C-Map MAX mapping capability with optional C-Map data card Built in wi-fi for connection to iPads and tablets for wireless navigation Sophisticated AIS SART MOB alarm and display capability User programmable alarms for CPA and TCPA Advanced filtering of targets External alarm and remote silence switch capability

4G/5G LTE Omni-Directional MIMO Antenna - White Overall data throughput is increased by using Multiple Input Multiple Output (MIMO) devices. Digital Antenna's 1742-MIMO antenna encompasses two separate antennas in one radome allowing devices requiring multiple RF connections to use fewer antennas.  Designed with vertical polarization, the Digital Antenna 1742-MIMO antenna provides the strongest 4G/5G/LTE signals for enhanced data speeds in poor cellular and WiFi signal areas.  Unsurpassed performance from 4-9dBi gain omnidirectional, dual vertical-polarized antennas covering 695-3000 MHz enclosed in a rugged UV stable, marine grade fiberglass housing with corrosion-resistant stainless steel hardware. Features: Vertically polarized, dual-integrated antennas 9dBi peak gain Enhanced data speeds Rugged UV stable polyurethane finish Foam-filled weatherproof housing Corrosion-resistant stainless steel components VSWR <1.5:1 in 4G & 5G bands Heavy-duty pole mount included Dual female N-type connectors RoHS Compliant

NavAlert NMEA Monitor & Alarm System NavAlert is Digital Yacht’s latest innovation and allows an alarm to be set for any parameter that’s available on the boat’s NMEA 2000 network. That could be navigation data such as depth, heading, or speed, as well as electrical data such as voltage and engine/generator data including temperature, pressure, tank levels, fuel flow, etc. It connects anywhere on the NMEA 2000 network and takes power from this connection, so installation is super simple. A local WiFi network is created by NavAlert, so setup is possible via any smartphone, tablet, or PC. Simply choose the parameter to monitor and set an alarm level. Alarms/Alerts Integrated into NavAlert is a custom alarm for anchor drift using an algorithm to calculate the optimum drift radius based on depth and the scope of the chain for reliable notifications. There’s also an anti-collision alarm based on CPA (closest point of approach) and TCPA (time to the closest point of approach) AIS data from a connected AIS. These alerts can also be monitored through the wireless interface with attractive graphical displays of current status. Alarms can also generate an SMS message, which can be relayed through Digital Yacht’s 4GXtream internet connectivity solution, allowing remote monitoring, which is great for feeling secure that the anchor is holding well when enjoying a lunch ashore. Alarms are independent of any alarms set on a plotter, allowing NavAlert to operate even without a primary multi-function display being powered up (an important feature for power-limited sailboats). Alerts can also be relayed to compatible multi-function devices (Garmin supports this function) for a pop-up data window indicating an alert and the ability to acknowledge it. *NavAlert is universal, using the industry standard NMEA 2000 data protocol, so it will integrate with all leading brands and systems. Operation The operation is simple. Simply search for the WiFi network that NavAlert creates and connect via a smartphone or tablet. Open a browser and connect to NavAlert, and users are presented with a clear graphical interface allowing easy setup, configuration, and viewing of the alerts and network data. NavAlert constantly monitors the whole network, so alert parameters can be set for any variable. Users can configure the NavAlert through its simple web interface. Just open a web browser, enter the NavAlert’s IP address, and users can change the network name and password, or even merge the WiFi to an existing WiFi network on board… So no complicated programming software or app is required. Features: Multiple parameters can be monitored Specifications: Universal NMEA 2000 alarm and monitoring solution Set a configurable audio and visual alarm for any parameter on the NMEA 2000 network – for instance: shallow depth, low fuel level, off course, engine temp, tank levels, low voltage, etc Relay the alert via the NMEA 2000 bus to a Garmin multi-function display to deliver a popup alarm window SMS alerting through Digital Yacht’s 4G Xtream system to a mobile – ideal for remote monitoring of the boat. Built-in unique anchor drift alarm Built-in AIS collision avoidance alarm What’s In the Box: 1m NMEA2000 drop cable WiFi antenna built-in

Digital Yacht LTD Digital Yacht are leaders in innovation in the supply of marine PC systems for both sail and power, from 30ft up to superyacht. The range of compact computers are compatible with the latest PC software and the flexible architecture means they can be easily configured to suit your exact needs. For larger applications Digital Yacht offers a range of 42in rack-mounted systems that can be custom built to run even the most complex systems.