|
16-14 Male Heatshrink Snap Plug - 100-Pack
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.
Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage.
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size.
Shrinks at 257 deg. F/125 deg. C.
Operating temperature range 40 deg. C to 110 deg. C.
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief.
Tinned for corrosion resistance.
Pure copper for maximum current flow.
Brazed seam for maximum strength.
Wire Range: 16-14/.197
Size: 3-5mm/5mm
Gender: Male
Qty/Pkg: 100
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
45.94 |
|
|
16-14 Female Heatshrink Snap Plug - 100-Pack
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.
Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage.
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size.
Shrinks at 257 deg. F/125 deg. C.
Operating temperature range 40 deg. C to 110 deg. C.
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief.
Tinned for corrosion resistance.
Pure copper for maximum current flow.
Brazed seam for maximum strength.
Wire Range: 16-14/.197
Size: 3-5mm/5mm
Gender: Female
Qty/Pkg: 100
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
45.94 |
|
|
22-18 Male Heatshrink Snap Plug - 100-Pack
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.
Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage.
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size.
Shrinks at 257 deg. F/125 deg. C.
Operating temperature range 40 deg. C to 110 deg. C.
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief.
Tinned for corrosion resistance.
Pure copper for maximum current flow.
Brazed seam for maximum strength.
Wire Range: 22-18/.157
Size: 0.3-0.8mm/4mm
Gender: Male
Qty/Pkg: 100
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.57 |
|
|
22-18 Female Heatshrink Snap Plug - 100-Pack
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC.
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief.
Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage.
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size.
Shrinks at 257 deg. F/125 deg. C.
Operating temperature range 40 deg. C to 110 deg. C.
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief.
Tinned for corrosion resistance.
Pure copper for maximum current flow.
Brazed seam for maximum strength.
Wire Range: 22-18/.157
Size: 0.3-0.8mm/4mm
Gender: Female
Qty/Pkg: 100
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.57 |
|
|
16-14 Male Disconnect Fully Insulated *100-Pack
Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.
Features:
0.250 (6.4 mm) tab size
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 310
|
20.44 |
|
|
16-14 Male Heatshrink Disconnect - 100-Pack
Features:
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief.
Tinned for corrosion resistance.
Pure copper for maximum current flow.
Brazed seam for maximum strength.
Wire Range: 16-14/.250
Size: 3.5mm/6.4mm
Gender: Male
Qty/Pkg: 100
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
53.06 |
|
|
16-14 Male Heatshrink Disconnects - 25-Pack
Ancor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief.
Features:
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
UL listed and CSA recognized
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.94 |
|
|
16-14 Female Heatshrink Disconnect - 100-Pack
Features:
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief.
Tinned for corrosion resistance.
Pure copper for maximum current flow.
Brazed seam for maximum strength.
Wire Range: 16-14/.250
Size: 3-5mm/6.4mm
Gender: Female
Qty/Pkg: 100
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
89.20 |
|
|
16-14 Heat Shrink Snap Plug - Male *3-Pack
Ancor heat shrink connectors offer heat-activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water-tight seal and the ultimate vibration and strain relief.
Features:
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
UL listed and CSA recognized
|
4.03 |
|
|
16-14 Heat Shrink Snap Plug - Male *25-Pack
Ancor heat shrink connectors offer heat-activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water-tight seal and the ultimate vibration and strain relief.
Features:
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
UL listed and CSA recognized
|
22.46 |
|
|
16-14 Female Heatshrink Disconnects - 25-Pack
Ancor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief.
Features:
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
UL listed and CSA recognized
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.61 |
|
|
16-14 Heat Shrink Snap Plug- Female *3-Pack
Ancor heat shrink connectors offer heat-activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water-tight seal and the ultimate vibration and strain relief.
Features:
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
UL listed and CSA recognized
|
4.03 |
|
|
16-14 Heat Shrink Snap Plug- Female *25-Pack
Ancor heat shrink connectors offer heat-activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water-tight seal and the ultimate vibration and strain relief.
Features:
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
UL listed and CSA recognized
|
22.46 |
|
|
16-14 Nylon Multi-Stack Disconnects - 100-Pack
These multi-stack disconnects are constructed from nylon and insulated for
extra protection against sunlight, gasoline, oil and chemicals. Double
crimp, funnel entry design guides wire into position and prevents strand
turnback. Crimp ridge positions the crimp tool to prevent miscrimps. Brass
sleeve crimps on wire insulation provide fatigue and strain relief.
Features:
.250 (6.4 mm) tab size
Fits wire gauges 16-14
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 310
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
26.03 |
|
|
12-10 Male Disconnect Fully Insulated *100-Pack
Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.
Features:
0.250 (6.4 mm) tab size
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 310
|
29.14 |
|