Flotec FPZT7350 1/2 HP Zinc Body Submersible High Output Sump Pump, Vertical Switch A ½ HP version of our highly engineered sump line – this pump moves up to 6,000 gallons per hour! The vertical switch allows this pump to fit in a sump basin as small as 10” wide.   FEATURES Corrosion Resistant Zinc Construction - Dissipates heat quickly and extends motor life Uni-Body Motor Housing - Eliminates leak points and maximizes pump life Stainless Steel Fasteners and Hardware - Superior quality Quadra SealTM Technology - Provides superior motor protection over single seal designs Smooth Flow HydraulicsTM - Deliver high performance for demanding applications Vertical Float Switch - Operates in 10” basins or larger   3 year limited warranty BODY CONSTRUCTION:  Zinc HORSEPOWER:  1/2 MAXIMUM CAPACITY:  6,000 GPH FLOW at 10' LIFT:  4,140 GPH SWITCH TYPE:  Vertical Float FLOAT SWITCH 'ON' LEVEL:  7-1/2" FLOAT SWITCH 'OFF' LEVEL:  3" MINIMUM SUMP DIAMETER:  10" DISCHARGE PIPE SIZE:  1 1/2” NPT MAXIMUM SOLIDS HANDLING SIZE:  3/8" CORD LENGTH:  8' VOLTAGE:  115 VAC, 60 Hz

Flotec FP4222 Cast Iron Convertible Jet Pump 3/4 HP Cast iron convertible jet pumps can be used in shallow or deep well applications in " diameter wells or larger and are pre-set for 30-50 PSI operation. KEY FEATURES Superior performance at depths to water of 100' or less Rugged, heavy-duty pump housing Ready-to-install 230 volt motor - see manual for 115 volt conversion Pressure switch pre-wired with 30-50 PSI pressure setting WARRANTY 1 year limited warranty  BODY CONSTRUCTION:  Cast Iron HORSEPOWER:  3/4 MAXIMUM CAPACITY:  11.9 GPM (shallow setup) FLOW at 10' LIFT and 40 PSI:  10.8 GPM (shallow setup) MAX LIFT:  25' w/ shallow setup / 100' w/ deep well setup MAXIMUM PRESSURE:  60 psi w/ shallow setup / 54 psi w/ deep setup PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT DISCHARGE PIPE SIZE:  1" NPT AMP DRAW (full load):  6.1 amps on 230v / 12.2 amps on 115v VOLTAGE:  230v / 115v, 60 Hz RECOMMENDED BREAKER:  15 amp for 230v / 20 amp for 115v MAXIMUM WATER TEMPERATURE:  140 F (60 C)

Flotec FP4822 Stainless Steel Shallow Well Jet Pump 3/4 HP Stainless steel shallow well jet pumps are heavy-duty, durable, corrosion resistant, high pressure and offer efficient non-stop operation for years. KEY FEATURES Superior performance at depths to water of 25' or less Heavy-duty, stainless steel pump housing for highest corrosion resistance Ready-to-install 230 volt motor - see manual for 115 volt conversion 1-1/4" NPT suction and 1" NPT discharge pipe sizes WARRANTY 1 year limited warranty  BODY CONSTRUCTION:  Stainless Steel HORSEPOWER:  3/4 MAXIMUM CAPACITY:  11 GPM FLOW at 10' LIFT and 40 PSI:  11 GPM MAX LIFT:  25' MAXIMUM PRESSURE:  52 psi MAXIMUM INLET PRESSURE:   PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT DISCHARGE PIPE SIZE:  NPT AMP DRAW (full load):  7.4 amps on 230v / 14.8 amps on 115v VOLTAGE:  230v / 115v, 60 Hz RECOMMENDED BREAKER:  15 amp on 230v / 20 amp on 115v MAXIMUM WATER TEMPERATURE:  122°F (50 °C)

Flotec FP4022-10 Thermoplastic Shallow Well Jet Pump 3/4 HP This new revision of an "old hand" provides good pressure pumping from wells where the depth-to-water is 25' or less. KEY FEATURES Perfect for shallow wells (depth-to-water less than 25') Thermoplastic construction for higher corrosion resistance 1-1/4" Suction / 1" Discharge Comes with pre-wired 30/50 pressure switch WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  3/4 MAXIMUM CAPACITY:  12 GPM FLOW at 10' LIFT and 40 PSI:  9.7 GPM MAX LIFT:  25' MAXIMUM PRESSURE:  78 psi PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT DISCHARGE PIPE SIZE:  1" NPT AMP DRAW (full load):  6.1 amps on 230v / 12.2 amps on 115v VOLTAGE:  230v / 115v, 60 Hz RECOMMENDED BREAKER:  15 amp on 230v / 20 amp on 115v   MAXIMUM WATER TEMPERATURE:  140 °F (60 °C)

Hypro 7560C, Roller Pump Ci Nyln Rollers   This HYPRO® 8-roller pump has a maximum pressure of 300 PSI. It can continuously operate at 100 PSI with a maximum flow rate of 12 GPM at 540 RPM. It can also operate at 22.5 GPM at 1000 RPM.    This hydraulic pump unit ships with a 3/4" NPT female with Super Rollers and Viton shaft seals.    Specifications   HYPRO® 7560C Roller Water Pump 8 roller water pump Maximum flow rate 22.5 GPM at 1000 RPM Maximum 1000 RPM 15/16" solid shaft 3/4" NPT inlet Continuous operation 100 at PSI and intermittent operation at 300 PSI Quick coupler not included: Use ASC# 25131 for 540 RPM and ASC# 25132 for 1000 RPM

March TE-7K-MD 3.5" 3PH 3Ph 3/4 Hp 3.5" Imp Pump

Flotec FPZT7450 3/4 HP Zinc Body Submersible High Output Sump Pump, Vertical Switch This pump offers our highly engineered sump pump design, along with high-output performance – achieving over 6,300 gallons per hour! A great option for very active sump pits. FEATURES Corrosion Resistant Zinc Construction - Dissipates heat quickly and extends motor life Uni-Body Motor Housing - Eliminates leak points and maximizes pump life Stainless Steel Fasteners and Hardware - Superior quality Quadra SealTM Technology - Provides superior motor protection over single seal designs Smooth Flow HydraulicsTM - Deliver high performance for demanding applications Vertical Float Switch - Operates in 10” basins or larger 3-year limited warranty BODY CONSTRUCTION:  Zinc HORSEPOWER:  3/4 MAXIMUM CAPACITY:  6,360 GPH FLOW at 10' LIFT:  4,500 GPH SWITCH TYPE:  Vertical Float FLOAT SWITCH 'ON' LEVEL:  7-1/2" FLOAT SWITCH 'OFF' LEVEL:  3" MINIMUM SUMP DIAMETER:  10" DISCHARGE PIPE SIZE:  1 1/2” NPT MAXIMUM SOLIDS HANDLING SIZE:  3/8" CORD LENGTH:  8' VOLTAGE:  115 VAC, 60 Hz.

Flotec FPZS50V Submersible Thermoplastic Sump Pump 1/2 HP Flotec's 1/2 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Vertical on/off float switch can be used in smaller sump basins. FEATURES Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications 1 Year Limited Warranty Switch Type:  Vertical - Operates in 10" basins or larger Horse Power:  1/2 HP GPH:  4,200 Max Lift:  22' Solids Handling:  3/16" Discharge:  1.5" NPT Power Cord:  8', Grounded

Flotec FPZS50T Submersible Thermoplastic Sump Pump Flotec's 1/2 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch. Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications Switch Type:  Tethered - Operates in 14" basins or larger Horse Power:  1/2 HP GPH:  4,200 Max Lift:  22' Solids Handling:  3/16" Discharge:  1/5" NPT Power Cord:  8', Grounded

Flotec FP0020 Float Switch Flotec Replacement Float Switch Only for Pedestal Sump Pumps, Internally Mounted in the Motor   Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same

Flotec FPZS25T Submersible Thermoplastic Sump Pump 1/4 HP Flotec's 1/4 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch.   Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications   Switch Type: Tethered - Operates in 14" basins or larger Horse Power: 1/4 HP GPH: 3,200 Max Lift: 20' Solids Handling: 3/16" Discharge: 1.5" NPT Power Cord: 8', Grounded

Flotec FPZS33T Submersible Thermoplastic Sump Pump 1/3 HP Flotec's 1/3 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch. Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications 1 Year Limited Warranty Switch Type:  Tethered - Operates in 14" basins or larger Horse Power:  1/3 HP GPH:  3,600 Max Lift:  22' Solids Handling:  3/16" Discharge:  1.5" NPT Power Cord:  8', Grounded

Flotec FPZS33V Submersible Thermoplastic Sump Pump 1/3 HP Flotec's 1/3 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Vertical on/off float switch can be used in smaller sump basins. Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications Switch Type:  Vertical - Operates in 10" basins or larger Horse Power:  1/3 HP GPH:  3,600 Max Lift:  22' Solids Handling:  3/16" Discharge:  1.5" NPT Power Cord:  8', Grounded 

Flotec FP18-15BD Tethered Float Switch KEY FEATURES Piggyback Electrical Plug Allows Simple Electrical Connection Works With Many Brands and Models of Submersible Sump Pump Easy To Install Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same

Flotec N76-46P Pump Body This is the durable plastic pump body, that is specially designed for use with Flotec shallow well jet pumps.   Replacement pump body N76-46P covers the pump impeller and directs water flow through the pump. This part replaces a worn or damaged body to restore proper pumping.   The Flotec, Simer and Sta-Rite pumps have interchangeable parts. If the part number is the same, it will work in any of the Flotec, Simer and Sta-Rite pumps.