|
Iwaki MD-30RLT, 3/4 inch MPT in/outlet 480gph 120v
Iwaki MD 30RLT Water Pump
Japanese pressure rated flow water pump.
3/4 inch MPT inlet and outlet.
1/16 HP Motor output.
3150 RPM motor speed.
0.8 amps.
Max flow 10.0 GPM.
480 GPH at 6 feet of head.
Max head 17.7 ft.
Max system pressure 11.60 psi.
Iwaki water pumps are magnetic driven, seamless pumps for use on either freshwater or saltwater aquariums. These pumps have a low heat exchange rate combined with quiet operation. Also the Iwaki pumps have a highly durable and aquarium tested design.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
310.00 |
|
|
Iwaki WMD-30RLT, 3/4 inch MPT input and outlet 480gph 115v
Iwaki WMD 30RLT Water Pump
Magnetically driven seal-less water pumps for use on fresh or saltwater aquariums.
Iwaki Walchem magnetic drive pumps will run longer, quieter and cooler than any traditional mag drive. Extraordinarily high efficiencies make WMD & MD the clear choice in almost every process, recirculation or transfer application.
The unique internal cooling circuit creates a positive, forced cooling path, lubricating bearing surfaces and actively purging gases & heat. The unique double bearing system allows cooling circuit liquid to continually "wash" front and rear radial bearings, extending bearing life.
Substantially reduced hydraulic noise is a major feature of all WMD/MD impellers. Great pains are taken in the molding/finishing process to eliminate tangential misalignment.
High lubricity fluoropolymer bearings minimize mechanical losses typical of conventional mag drive pumps. High purity SiC radial bearings handle the most aggressive ultrapure chemistries. PTFE front thrust surface aids hydraulic balance and minimizes flashing. Large rear thrust surface guards against axial forces caused by cavitation or gas entrapment.
Dynamically balanced barium ferrite drive magnets provide best magnet torque. Die cast magnet carrier creates a flywheel effect, which adds to the magnet safety factor.
American motor pressure rated water pump.
3/4 inch MPT inlet and outlet.
1/16 HP Motor output.
3150 RPM motor speed.
120 volt
1.00 amps.
Max flow 10.0 GPM.
480 GPH at 6 feet of head.
Max head 17.7 ft.
Max system pressure 11.60 psi.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
339.04 |
|
|
IWAKI MD-70RLZ, MAG DRIVE PUMP POLY 115V
Mag Drive Centrifugal Pump and Motor Assembly, High head impeller, GFRPP Polypropylene Construction, close coupled to a 2/7 Horsepower, 115 Volts AC, 1 Phase, TEFC Electric Motor. 3/4 Inch Hose Barb Port Connections.
FEATURES
Pump Body: GFRPP Polypropylene
Impeller: GFRPP Polypropylene
Ports: 3/4 Inch Hose Barb Port Connections
Motor: 2/7 Horsepower, 115 Volts AC, , 1 Phase 1
|
693.00 |
|
|
IWAKI MD-55RL-115, PUMP CENTTIFUGAL POLY 1" 16 GPM 115V
GFRPP Polypropylene Construction.
Close coupled to a 1/8 Horsepower, 115 Volts AC, 1 Phase, TEFC Electric Motor.
Port Connections 1 Inch Hose Barb.
|
552.00 |
|
|
Iwaki MD-70RLT, 1 inch MPT in/outlet 1440gph 120v
Iwaki MD-70RLT Water Pump
Japanese pressure rated water pump.
1 inch MPT inlet and outlet.
1/4 HP Motor output.
3400 RPM motor speed.
120 volt
2.80 amps.
Max flow 25.6 GPM.
1440 GPH at 6 feet of head pressure
Max head 31.8 ft.
Max system pressure 21.33 psi.
Iwaki water pumps are magnetic driven, seamless pumps for use on either freshwater or saltwater aquariums. These pumps have a low heat exchange rate combined with quiet operation. Also the Iwaki pumps have a highly durable and aquarium tested design.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
618.00 |
|
|
IWAKI MD-10L, 115v PUMP POLY 1/2" 3.3 GPM
Mag Drive Centrifugal Pump and Motor Assembly, GFRPP Polypropylene Construction, close coupled to a 1/125 Horsepower, 115 Volts AC, 1 Phase Electric Motor. 35/64 Inch Hose Barb Port Connections.
|
161.20 |
|
|
IWAKI MD-6L, 115v PUMP POLY 1/2" 2.6 GPM
Mag Drive Centrifugal Pump and Motor Assembly, GFRPP Polypropylene Construction, close coupled to a 1/250 Horsepower, 115 Volts AC, 1 Phase Electric Motor. 35/64 Inch Hose Barb Port Connections.
|
159.12 |
|
|
IWAKI MD-55R-115, MAGNETIC DRIVE PUMP POLY 1" 115V 18GPM
Magnetic Drive Centrifugal Pump and Motor.
GFRPP Polypropylene Construction
Close coupled to a 1/8 Horsepower, 115 Volts AC, 1 Phase, TEFC Electric Motor.
Port Connections1 Inch NPT Threaded.
|
552.00 |
|
|
IWAKI MD-70RL-115, MAG DRIVE PUMP POLY 1" 115V
Mag Drive Centrifugal Pump and Motor Assembly, GFRPP Polypropylene Construction, close coupled to a 1/4 Horsepower, 115 Volts AC, 1 Phase, TEFC Electric Motor. 1 Inch Hose Barb Port Connections.
|
618.00 |
|
|
Iwaki MD-100RLT, 1 inch MPT in/outlet 1986gph 120v
Iwaki MD-100RLT Water Pump
Mag Drive Centrifugal Pump and Motor Assembly, GFRPP Polypropylene Construction, close coupled to a 1/3 Horsepower, 115 Volts AC, 1 Phase, TEFC Electric Motor. 1 Inch NPT Threaded Port Connections.
Japanese pressure rated flow pump.
1 inch MPT inlet and outlet.
1/3 HP Motor output.
3300 RPM motor speed.
120 volts
3.4 amps.
Max flow 35.6 GPM.
1986 GPH at 6 feet of head.
Max head 39.0 ft.
Max system pressure 25.6 psi.
Twin bearing system handles thrust loads, extends service life
Hollow rotating / internal cooling circuit reduces bearing temperature.
Compact / Quiet energy for easy maintenance.
Few moving parts for easy maintenance
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
Iwaki America Inc. of Holliston, Massachusetts, is a joint venture which grew from a 15 year association between Walchem Corp. of Holliston, MA and Iwaki Co. Ltd. of Tokyo, Japan. Combining Walchems 30 years of chemical injection and control experience with Iwakis 50 years of pump design engineering, Iwaki America offers the best chemical handling equipment for use in Chemical Process, O.E.M., Industrial and Semiconductor applications.
|
748.00 |
|
|
Iwaki MD-55RLT, 1 inch MPT in/outlet 990gph 120v
Iwaki MD55RLT Water Pump
Japanese pressure rated water pump.
1 inch MPT inlet and outlet
1/8 HP Motor output.
3400 RPM motor speed.
120 Volt
1.60 amps.
Max flow 18.4 GPM.
990 GPH at 6 feet of head.
Max head 26.9 ft.
Max system pressure 17.06 psi.
Iwaki water pumps are magnetic driven, seamless pumps for use on either freshwater or saltwater aquariums. These pumps have a low heat exchange rate combined with quiet operation. Also the Iwaki pumps have a highly durable and aquarium tested design.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
552.00 |
|
|
IWAKI MD-55LFZ-115, MAG DRIVE PUMP 115V 1" PORTS HI PRESS
Mag Drive Centrifugal Pump and Motor Assembly, High head impeller, Carbon filled ETFE Fluoroplastic Construction, close coupled to a 1/8 Horsepower, 115 Volts AC, 1 Phase, TEFC Electric Motor. 1 Inch NPT Threaded Port Connections.
|
1281.60 |
|
|
IWAKI MD-6Z, 115volts Mag Drive Pump
Iwaki Mag Drive Centrifugal Pump and Motor Assembly, High head impeller, GFRPP Polypropylene Construction, close coupled to a 1/250 Horsepower, 115 Volts AC, 1 Phase Electric Motor. 35/64 Inch Hose Barb Port Connections.
|
159.12 |
|
|
Iwaki MD-70RLZT, 3/4 inch MPT in/outlet 684gph 120v
Iwaki MD-70RLZT Water Pump
Japanese high pressure rated water pump.
3/4 inch MPT inlet and outlet.
2/7 HP Motor output.
3400 RPM motor speed.
120 volt
3.80 amps.
Max flow 11.4 GPM
684 GPH
Max head 66.6 ft.
Max system pressure 42.7 psi.
Iwaki water pumps are magnetic driven, seamless pumps for use on either freshwater or saltwater aquariums. These pumps have a low heat exchange rate combined with quiet operation. Also the Iwaki pumps have a highly durable and aquarium tested design.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RLZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
693.00 |
|
|
IWAKI MD-40RT-115NL, CENTRIFUGAL PUMP POLY 115V 3/4" 13GPM
Centrifugal Pump and Motor.
GFRPP Polypropylene Construction.
Close coupled to a 1/12 Horsepower, 115 Volts AC, 1 Phase, TEFC Electric Motor.
Port Connections 3/4 Inch NPT Threaded.
|
481.00 |
|