|
Iwaki WMD-20RLXT, 1 inch MPT in/outlet 372gph 120v
Iwaki WMD 20RLXT Water Pump
American motor High Flow water pump.
1 inch MPT inlet and outlet.
1/38 HP Motor output.
3100 RPM motor speed.
120 volt
0.50 amps.
Max flow 13.7 GPM.
372 GPH at 6 feet of head.
Max head 8.2 ft.
Max system pressure 5.69 psi.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
320.32 |
|
|
Iwaki WMD-20RLZT, 3/4 inch MPT in/outlet 174gph 120v
Iwaki WMD 20RLZT Water Pump
American motor high pressure rated water pump.
3/4 inch MPT inlet and outlet.
1/38 HP Motor output.
3100 RPM motor speed.
120 volts
0.53 amps
Max flow 2.9 GPM.
174 GPH
Max head 22.6 ft.
Max system pressure 14.22 psi.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
329.68 |
|
|
Iwaki WMD-30RLT, 3/4 inch MPT input and outlet 480gph 115v
Iwaki WMD 30RLT Water Pump
Magnetically driven seal-less water pumps for use on fresh or saltwater aquariums.
Iwaki Walchem magnetic drive pumps will run longer, quieter and cooler than any traditional mag drive. Extraordinarily high efficiencies make WMD & MD the clear choice in almost every process, recirculation or transfer application.
The unique internal cooling circuit creates a positive, forced cooling path, lubricating bearing surfaces and actively purging gases & heat. The unique double bearing system allows cooling circuit liquid to continually "wash" front and rear radial bearings, extending bearing life.
Substantially reduced hydraulic noise is a major feature of all WMD/MD impellers. Great pains are taken in the molding/finishing process to eliminate tangential misalignment.
High lubricity fluoropolymer bearings minimize mechanical losses typical of conventional mag drive pumps. High purity SiC radial bearings handle the most aggressive ultrapure chemistries. PTFE front thrust surface aids hydraulic balance and minimizes flashing. Large rear thrust surface guards against axial forces caused by cavitation or gas entrapment.
Dynamically balanced barium ferrite drive magnets provide best magnet torque. Die cast magnet carrier creates a flywheel effect, which adds to the magnet safety factor.
American motor pressure rated water pump.
3/4 inch MPT inlet and outlet.
1/16 HP Motor output.
3150 RPM motor speed.
120 volt
1.00 amps.
Max flow 10.0 GPM.
480 GPH at 6 feet of head.
Max head 17.7 ft.
Max system pressure 11.60 psi.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
339.04 |
|
|
Iwaki WMD-40RLT 3/4 inch MPT in/outlet 720gph 120v
Iwaki WMD 40RLT Water Pump
American motor pressure rated water pump.
3/4 inch MPT inlet and outlet
1/12 HP Motor output.
3200 RPM motor speed.
120 volt
1.90 amps.
Max flow 13.7 GPM.
720 GPH at 6 feet of head
Max head 21.3 ft
Max system pressure 14.22 psi.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
412.88 |
|
|
Iwaki WMD-30RLXT, 1 inch MPT in/outlet 870gph 120v
Iwaki WMD 30RLXT Water Pump
American motor High Flow water pump
1 inch MPT inlet and outlet.
1/16 HP Motor output.
3150 RPM motor speed
120 volts
1.00 amps.
Max flow 19.0 GPM.
870 GPH at 6 feet of head
Max head 13.5 ft
Max system pressure 8.54 psi
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
374.40 |
|
|
Iwaki WMD-30RLZT, 3/4 inch MPT in/outlet 270gph 120v
Iwaki WMD 30RLZT Water Pump
American motor high pressure water rated pump
3/4 inch MPT inlet and outlet.
1/16 HP Motor output.
3150 RPM motor speed.
120 volts
1.00 amps.
Max flow 4.5 GPM.
270 GPH
Max head 36.1 ft.
Max system pressure 24.20 psi.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
377.52 |
|
|
Iwaki WMD-40RLXT, 1 inch MPT in/outlet 1080gph
Iwaki WMD 40RLXT Water Pump
American motor High Flow water pump.
1 inch MPT inlet and outlet.
1/12 HP Motor output.
3400 RPM motor speed.
120 volt
1.90 amps.
Max flow 22.7 GPM.
1080 GPH at 6 feet of head.
Max head 15.4 ft.
Max system pressure 9.95 psi.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
451.00 |
|
|
IWAKI WMD-30RL, 115v Mag Drive Centrifugal Pump
FEATURES
Pump Body: GFRPP Polypropylene
Impeller: GFRPP Polypropylene
Ports: 3/4 Inch Hose Barb
Motor: 1/16 Horsepower, 115 Volts AC, , 1 Phase
Mag Drive Centrifugal Pump and Motor Assembly, GFRPP Polypropylene Construction, close coupled to a 1/16 Horsepower, 115 Volts AC, 1 Phase Electric Motor. 3/4 Inch Hose Barb Port Connections.
|
339.04 |
|
|
IWAKI MD-30RX-115NL-01, Mag Drive Pump 1" npt 12 GPM
Mag Drive Centrifugal Pump and Motor Assembly, High flow impeller, GFRPP Polypropylene Construction, close coupled to a 1/16 Horsepower, 115 Volts AC, 1 Phase, TENV Electric Motor. 1 Inch Hose Barb Port Connections.
|
322.40 |
|
|
IWAKI MD-55R-220,MAGNETIC DRIVE PUMP POLY 220V 18.4 GPM
Magnetic Drive Centrifugal Pump and Motor.
GFRPP Polypropylene Construction.
Close coupled to a 1/8 Horsepower, 220 Volts AC, 1 Phase, TEFC Electric Motor.
Port Connections 1 Inch Hose Barb.
|
552.00 |
|
|
IWAKI MD-55RT-220 PUMP POLY 1" 220V
|
552.00 |
|
|
IWAKI MD-15R-115NL-01, PUMP POLY 1/2" 4.9GPM
Magnetic Drive Centrifugal Pump and Motor Assembly with GFRPP Polypropylene Construction. It is close coupled to a 1/75 Horsepower, 115 Volts AC, 1 Phase Electric Motor with 1/2 Inch Hose Barb Port Connections.
|
265.20 |
|
|
IWAKI MD-70R-220, PUMP POLY 1" 220V 25.6 GPM
Centrifugal Magnetic Drive Pump and Motor Assembly.
GFRPP Polypropylene Construction, close coupled to a 1/4 Horsepower, 220 Volts AC, 1 Phase, TEFC Electric Motor. 1 Inch Hose Barb Port Connections.
|
618.00 |
|
|
IWAKI MD-15R-230GS, PUMP POLY 1/2 230V CE
Magnetic Drive Centrifugal Pump and Motor Assembly, GFRPP Polypropylene Construction, close coupled to a 1/75 Horsepower, 230 Volts AC, 1 Phase Electric Motor. 1/2 Inch Hose Barb Port Connections.
Features
• Twin bearing system handles thrust loads, extends service life
• Hollow rotating / Internal cooling circuit reduces bearing temperature
• Compact / Quiet energy efficient design
• Few moving parts for easy maintenance.
|
265.20 |
|
|
IWAKI 23019, PUMP HEAD 1 1/2"- 2" ANGLED
|
13.77 |
|