|
Johnson 10-24502-04 Mag Drive Pump 24V CM10P7-1
Johnsons line of compact Magnetic Driven centrifugal pumps, the CM10P7-1 model combine high flow rates with very low electric current consumption, making them ideally suited for circulating water in live fish tanks, heating and cooling systems. Designed for continuous operation with water/glycol mixture (maximum 60% glycol), fresh or salt water. Liquid temperature: Minimum -40F (-40C), Maximum +212F (+100°C).
FEATURES
Pump Body: PPA Thermoplastic
Port Size: 3/4" (16mm) Hose or 3/4" (20mm) Hose Depending on the Model
Flow: From 4.0 GPM (15 L/Minute) up to 6.9GPM (26 L/Minute) Depending on the Model
Impeller: PPS Thermoplastic
Shaft: Stainless Steel
Housing O-ring: EPDM
Motor: 24 VDC Enclosed Permanent Magnet, Ball Bearing, Continuous Duty.
Up To 5000 hour motor life. IP67 Rated.
|
198.59 |
|
|
Johnson 10-24502-03 Mag Drive Pump 12V CM10P7-1
Johnsons line of compact Magnetic Driven centrifugal pumps, the CM10P7-1 model combine high flow rates with very low electric current consumption, making them ideally suited for circulating water in live fish tanks, heating and cooling systems. Designed for continuous operation with water/glycol mixture (maximum 60% glycol), fresh or salt water. Liquid temperature: Minimum -40F (-40C), Maximum +212F (+100°C).
FEATURES
Pump Body: PPA Thermoplastic
Port Size: 5/8" (16mm) Hose or 3/4" (20mm) Hose Depending on the Model
Flow: From 4.0 GPM (15 L/Minute) up to 6.9GPM (26 L/Minute) Depending on the Model
Impeller: PPS Thermoplastic
Shaft: Stainless Steel
Housing O-ring: EPDM
Motor: 12 or 24 VDC Enclosed Permanent Magnet, Ball Bearing, Continuous Duty.
Up To 5000 hour motor life. IP67 Rated.
|
198.59 |
|
|
Johnson 10-24501-04 Mag Drive Pump 24V CM10P7-1
Johnsons line of compact Magnetic Driven centrifugal pumps, the CM10P7-1 model combine high flow rates with very low electric current consumption, making them ideally suited for circulating water in live fish tanks, heating and cooling systems. Designed for continuous operation with water/glycol mixture (maximum 60% glycol), fresh or salt water. Liquid temperature: Minimum -40F (-40C), Maximum +212F (+100°C).
FEATURES
Pump Body: PPA Thermoplastic
Port Size: 5/8" (16mm) Hose or 3/4" (20mm) Hose Depending on the Model
Flow: From 4.0 GPM (15 L/Minute) up to 6.9GPM (26 L/Minute) Depending on the Model
Impeller: PPS Thermoplastic
Shaft: Stainless Steel
Housing O-ring:EPDM
Motor: 24 VDC Enclosed Permanent Magnet, Ball Bearing, Continuous Duty.
Up To 5000 hour motor life. IP67 Rated.
|
198.59 |
|
|
Johnson 10-24487-04 Cm10P7-1 Mag Drive 24V 3/4"
|
198.59 |
|
|
Johnson 10-24503-04 Mag Drive Pmp 24V Cm30 5/8"
|
198.59 |
|
|
Johnson 10-24504-04 24Vdc Magnetic Drive Centrifugal Pump
Johnson CM30P7-1
A line of compact Magnetic Driven centrifugal pumps, the CM30P7-1 models combine high flow rates with very low electric current consumption, making them ideally suited for circulating water in live fish tanks or heating and cooling systems in buses and limousines.
Designed for continuous operation with water or water/glycol mixture (maximum 60% glycol).
Not Warrantied For Salt Water Use But We Have Seen Customers Use Them For Salt Water.
Liquid temperature: Minimum -40F (-40C), Maximum +212F (+100°C), do not allow water to freeze inside pump.
Pump Body: PPA Thermoplastic
Port Size: 5/8" (16mm) Hose or 3/4" (20mm) Hose Depending on the Model
Flow: From 4.0 GPM (15 L/Minute) up to 6.9GPM (26 L/Minute) Depending on the Model
Impeller: PPS Thermoplastic
Shaft: Stainless Steel
Housing O-Ring: EPDM
Motor: 24 VDC Enclosed Permanent Magnet, Ball Bearing, Continuous Duty.
Up To 5000 Hour Motor Life.
IP67 Rating, Weather-Proof and Dust-Proof, Not Submersible.
Maximum 27 Watt Draw on CM30 Models.
|
198.59 |
|
|
Johnson 10-13350-04 Waste Pump 24V
|
369.46 |
|
|
24V BALLAST PUMP JS 10-24690-04
|
354.07 |
|
|
IWAKI L-MD-10-CW, LIQUID END MAG-DRIVE
|
64.09 |
|
|
24V IMPELLER PUMP Johnson
|
309.43 |
|
|
|
550.64 |
|
|
|
439.88 |
|
|
CM10P7-1 - 12V Circulation Pump
Features:
12V, 4.0 GPM circulation pump
Compact, magnetic driven centrifugal pump
High flow rate with very low electrical current consumption
Suitable for fresh water, ethylene glycol and salt water
|
127.40 |
|
|
Johnson 10-13408-04 AQUA JET UNO 5.2 GPM 24V Water Pressure System
Pump Body:
Polypropylene
Valve Housing:
Polypropylene
Port Size:
1/2" Hose (ø 18 mm)
Flow:
5.2 GPM (19.4 L/Min) for Aqua Jet UNO 5.2
Pressure:
Cut-In: 25 PSI, 1.7 bar
Cut-Out: 40 PSI, 2.8 bar
Valves:
Santoprene
Diaphragm:
Santoprene
Accumulator Tank:
2 Liter with Internal Bladder
Motor:
24 VDC with built in thermal protection. Duty cycle: Intermittent, max 20 min. The motor is ignition protected according to ISO 8846 (Small craft Electrical devices Protection against ignition of surrounding flammable gases). 100 Watt for UNO 3.5, 150 Watt for UNO 5.2.
APPLICATIONS
The Aqua Jet UNO pump is a five chamber positive displacement diaphragm pump system with Accumulator Tank. This pump is the ideal choice for pressurizing water in a closed system such as that found in a boat or in a recreational vehicle. It can easily build the pressure required for a pressurized water supply system.
Quiet operation • Smooth flowing • Self priming ( 2m 6.5ft for UNO 3.5) (2.5m 8.2ft for UNO 5.2) • Integrated pressure switch turns pump on and off automatically when tap is opened and closed • Dry running without damage • Low power consumption • Quick disconnect fittings
|
581.73 |
|
|
Johnson 10-24501-03 Mag Drive Pump 12V CM10P7-1
Johnsons line of compact Magnetic Driven centrifugal pumps, the CM10P7-1 model combine high flow rates with very low electric current consumption, making them ideally suited for circulating water in live fish tanks, heating and cooling systems. Designed for continuous operation with water/glycol mixture (maximum 60% glycol), fresh or salt water. Liquid temperature: Minimum -40F (-40C), Maximum +212F (+100°C).
FEATURES
Pump Body: PPA Thermoplastic
Port Size: 5/8" (16mm) Hose or 3/4" (20mm) Hose Depending on the Model
Flow: From 4.0 GPM (15 L/Minute) up to 6.9GPM (26 L/Minute) Depending on the Model
Impeller: PPS Thermoplastic
Shaft: Stainless Steel
Housing O-ring:EPDM
Motor: 12 or 24 VDC Enclosed Permanent Magnet, Ball Bearing, Continuous Duty.
Up To 5000 hour motor life. IP67 Rated.
|
198.59 |
|