Free Swimmer EX 8000 Bite & Run Spinning Reel Free Swimmer EX features an automatic Bite N’ Run clutch at the base of the body, allowing anglers to instantly disengage the spool so the line can peel off with little or no resistance while the bail is closed. Simply pull down on the lever to place the reel in free-spool mode and flip it back instantly to reengage when a fish grabs your bait. A small tension control knob at the back of the reel makes it easy to adjust spool tension to control the speed at which line plays out. With the Free Swimmer EX, though, it’s easy to cast energetic live bait away from the vessel, so it can swim freely where you’re most likely to draw a strike. Fishing live-lining Gulf Coast hardtails or sardines, feeding big baits to tarpon in the Florida Keys, targeting huge cobia in the mid-Atlantic region, or swimming big bunkers in Northeast waters for cow stripers, Daiwa’s Free Swimmer EX provides that extra edge. Using the tension control, anglers can moderate the speed at which the offerings swim, slowing overly active live bait to keep them centered in the strike zone. The ability to free-line with a closed bail also adds an extra degree of safety since anglers never have to keep a finger on a braided line to hold the bait in the perfect position. Features: ATD Drag - Daiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest yet becomes more viscous immediately after drag start-up. This reduces initial drag start-up inertia and, combined with the structural changes of the ATD Drag System, results in a smoother drag from the initial hook-up. Digigear - Daiwa’s first generation of digitally engineered gear design ensures a perfect mesh between ultra-tough drive gears and pinion gears for optimized speed, power, durability, and smoothness. Machined Aluminum Handle - Ergonomically correct and screws easily into the body. Metal Ball Knob - Providing maximum contact between handle knob and hand, ball knobs are designed for optimal balance, rotation, and functionality. Specifications: Bearings: 5 (4CRBB+1BB) + 1        Gear Ratio: 4.7: 1 Line Per Crank (inch): 36.1" Weight (oz): 22.9 Mono Capacity: 16/330, 20/280 J Braid Capacity: 40/330, 50/280                                                Drag Max: 22 Handle Position: Left/right

Free Swimmer EX 10000 Bite & Run Spinning Reel Free Swimmer EX features an automatic Bite N’ Run clutch at the base of the body, allowing anglers to instantly disengage the spool so the line can peel off with little or no resistance while the bail is closed. Simply pull down on the lever to place the reel in free-spool mode and flip it back instantly to reengage when a fish grabs your bait. A small tension control knob at the back of the reel makes it easy to adjust spool tension to control the speed at which line plays out. With the Free Swimmer EX, though, it’s easy to cast energetic live bait away from the vessel, so it can swim freely where you’re most likely to draw a strike. Fishing live-lining Gulf Coast hardtails or sardines, feeding big baits to tarpon in the Florida Keys, targeting huge cobia in the mid-Atlantic region, or swimming big bunkers in Northeast waters for cow stripers, Daiwa’s Free Swimmer EX provides that extra edge. Using the tension control, anglers can moderate the speed at which the offerings swim, slowing overly active live bait to keep them centered in the strike zone. The ability to free-line with a closed bail also adds an extra degree of safety since anglers never have to keep a finger on a braided line to hold the bait in the perfect position. Features: ATD Drag - Daiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest yet becomes more viscous immediately after drag start-up. This reduces initial drag start-up inertia and, combined with the structural changes of the ATD Drag System, results in a smoother drag from the initial hook-up. Digigear - Daiwa’s first generation of digitally engineered gear design ensures a perfect mesh between ultra-tough drive gears and pinion gears for optimized speed, power, durability, and smoothness. Machined Aluminum Handle - Ergonomically correct and screws easily into the body. Metal Ball Knob - Providing maximum contact between handle knob and hand, ball knobs are designed for optimal balance, rotation, and functionality. Specifications: Bearings: 5 (4CRBB+1BB) + 1       Gear Ratio: 4.7: 1 Line Per Crank (inch): 39.3" Weight (oz): 23.3 Mono Capacity: 20/330, 25/280     J Braid Capacity: 50/330, 65/280                                                  Drag Max: 22 Handle Position: Left/right

Free Swimmer 3000 Bite & Run Spinning Reel  The Free Swimmer features an Air Rotor that stands out for its balance, toughness, and sensitivity. Its arched profile and 15% weight reduction compared to standard rotors offer optimal winding smoothness while eliminating vibration thanks to a lowered center of gravity. The Free Swimmer is sold with an alloy side plate that features Digigear technology. Compared to most of the competition, the gears are between 20% and 40% larger and have a bigger tooth pattern, resulting in a longer gear life of up to three times that of competitive reels. Machined aluminum screw-in handle with a power round EVA knob for generating extra leverage, plus an O-ring sealing system to ensure high-quality saltwater performance. Features ATD Drag - Daiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest yet becomes more viscous immediately after drag start-up. This reduces initial drag start-up inertia and, combined with the structural changes of the ATD Drag System, results in a smoother drag from the initial hook-up. Digigear - Daiwa’s first generation of digitally engineered gear design ensures a perfect mesh between ultra-tough drive gears and pinion gears for optimized speed, power, durability, and smoothness. Machine Cut Handle - The handle design is slimmer, more compact, and 50% lighter. Specifications: Bearings: 5 (4CRBB+1BB) + 1                        Gear Ratio: 5.2: 1            Line Per Crank (inch): 30.6" Weight (oz): 9.5 Mono Capacity: 10/280, 12/220 J Braid Capacity: 15/250, 20/220                                                                Drag Max: 22 Handle Position: Left/right

Free Swimmer 5000 Bite & Run Spinning Reel The Free Swimmer features an Air Rotor that stands out for its balance, toughness, and sensitivity. Its arched profile and 15% weight reduction compared to standard rotors offer optimal winding smoothness while eliminating vibration thanks to a lowered center of gravity. The Free Swimmer is sold with an alloy side plate that features Digigear technology. Compared to most of the competition, the gears are between 20% and 40% larger and have a bigger tooth pattern, resulting in a longer gear life of up to three times that of competitive reels. Machined aluminum screw-in handle with a power round EVA knob for generating extra leverage, plus an O-ring sealing system to ensure high-quality saltwater performance. Features ATD Drag - Daiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest yet becomes more viscous immediately after drag start-up. This reduces initial drag start-up inertia and, combined with the structural changes of the ATD Drag System, results in a smoother drag from the initial hook-up. Digigear - Daiwa’s first generation of digitally engineered gear design ensures a perfect mesh between ultra-tough drive gears and pinion gears for optimized speed, power, durability, and smoothness. Machine Cut Handle - The handle design is slimmer, more compact, and 50% lighter. Specifications: Bearings: 5 (4CRBB+1BB) + 1                        Gear Ratio: 5.2: 1            Line Per Crank (inch): 34.5" Weight (oz): 10.2 Mono Capacity: 14/280, 20/180     J Braid Capacity: 30/230, 40/160                                                                Drag Max: 26.4 Handle Position: Left/right

22 Free Swimmer Bite'N' Run 8000 Spinning Reel - FRSW8000 A return to the foray of Bite’N’Run reels with Daiwa’s new FREE SWIMMER BR. Bite’N’Run is a key technology for keen live or dead bait anglers allowing fish to take baits under minimal line tension to ensure a solid hookset is achieved.  Designed in collaboration between Daiwa USA, Daiwa Australia, Daiwa New Zealand, and alongside Japanese engineers, FREE SWIMMER BR is a product five years in the making and a testament to Daiwa’s commitment to providing the best products to suit local conditions. Anglers will set the Bite’N’Run tension by adjusting the dial on the bottom of the reel, a wide range can be set to suit unweighted baits for finicky feeders such as whiting, up to quite strong settings suitable to live baiting large baits for hard-fighting predators like Kingfish & Mackeral.  FREE SWIMMER BR is built off a strong & sturdy carbon composite frame and Air Rotor. The internals has been carefully sealed through careful design and implementation of rubber seals to make FREESWIMMER a true Saltwater Bite’N’Run reel. Careful attention to detail was paid throughout the design and prototype stages to make FREE SWIMMER BR capable of handling even the largest of New Zealand Kingfish & Snapper.  FREE SWIMMER BR is equipped with a host of regular Daiwa technologies including Air Rotor, ATD Drag, Tough Digigear & more to round out the best-performing Bite’N’Run reel Daiwa has ever produced. BITE N RUN Bite’N’Run is a key technology for keen live or dead bait anglers allowing fish to take baits under minimal line tension to ensure a solid hook set is achieved. The rear drag can be easily adjusted to provide optimum tension for each scenario. AIR ROTOR Lighter, stronger, and more balanced than any rotor system that’s come before, ‘Air Rotor’ delivers a great leap forward in rotor design and function and delivers the ultimate line roller support. Made from Zaion and featuring a redesigned arch that disperses pressure to the lower section of the rotor to reduce stressing and flexing, the design is further enhanced with a hollowed-out construction reducing weight while increasing reel sensitivity and rotational balance. ATD DRAG Daiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest, yet becomes more viscous immediately after drag starts up. This reduces initial drag start-up inertia and combined with the structural changes of the ATD Drag System results in a smoother drag from the initial hook up. TOUGH DIGIGEAR Further evolution of its predecessor Digigear, Tough Digigear is our brand new digitally designed, machine-cut gearing system that ensures ultimate gear precision, rotational smoothness, and strength.

22 Free Swimmer Bite'N' Run 10000 Spinning Reel - FRSW10000 A return to the foray of Bite’N’Run reels with Daiwa’s new FREE SWIMMER BR. Bite’N’Run is a key technology for keen live or dead bait anglers allowing fish to take baits under minimal line tension to ensure a solid hookset is achieved.  Designed in collaboration between Daiwa USA, Daiwa Australia, Daiwa New Zealand, and alongside Japanese engineers, FREE SWIMMER BR is a product five years in the making and a testament to Daiwa’s commitment to providing the best products to suit local conditions. Anglers will set the Bite’N’Run tension by adjusting the dial on the bottom of the reel, a wide range can be set to suit unweighted baits for finicky feeders such as whiting, up to quite strong settings suitable to live baiting large baits for hard-fighting predators like Kingfish & Mackeral.  FREE SWIMMER BR is built off a strong & sturdy carbon composite frame and Air Rotor. The internals has been carefully sealed through careful design and implementation of rubber seals to make FREESWIMMER a true Saltwater Bite’N’Run reel. Careful attention to detail was paid throughout the design and prototype stages to make FREE SWIMMER BR capable of handling even the largest of New Zealand Kingfish & Snapper.  FREE SWIMMER BR is equipped with a host of regular Daiwa technologies including Air Rotor, ATD Drag, Tough Digigear & more to round out the best-performing Bite’N’Run reel Daiwa has ever produced. BITE N RUN Bite’N’Run is a key technology for keen live or dead bait anglers allowing fish to take baits under minimal line tension to ensure a solid hook set is achieved. The rear drag can be easily adjusted to provide optimum tension for each scenario. AIR ROTOR Lighter, stronger, and more balanced than any rotor system that’s come before, ‘Air Rotor’ delivers a great leap forward in rotor design and function and delivers the ultimate line roller support. Made from Zaion and featuring a redesigned arch that disperses pressure to the lower section of the rotor to reduce stressing and flexing, the design is further enhanced with a hollowed-out construction reducing weight while increasing reel sensitivity and rotational balance. ATD DRAG Daiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest, yet becomes more viscous immediately after drag starts up. This reduces initial drag start-up inertia and combined with the structural changes of the ATD Drag System results in a smoother drag from the initial hook up. TOUGH DIGIGEAR Further evolution of its predecessor Digigear, Tough Digigear is our brand new digitally designed, machine-cut gearing system that ensures ultimate gear precision, rotational smoothness, and strength.

Emcast BR LT Spinning Reel - ECLTBR2500  The Emcast Bite N’ Run feature allows the line to pay off the reel when a gamefish takes a live or natural bait. Once the line is paying off the reel, the refined Auto Clutch will put the reel in gear allowing a solid hook set. It is much more controlled than simply opening up the bail, the traditional method used when fishing natural baits with spinning reels.  The reel designs are in the LT Concept of light yet tough. The Carbon Light Body is substantially lighter yet just as strong as traditional materials. To further the concept, the Air Rotor is also lighter yet just as strong. A slick Machined Aluminum Handle is powerful yet comfortable to the hand. When a gamefish is taking a bait offering and the reel is put in gear, the ATD or Advanced Tournament Drag System, utilizing a proprietary grease, allows the smooth payoff of line no matter how long the run. A 5.2 to 1 Gear Ratio shades the reel toward pulling power. If you are looking for an exciting reel tailored for the live and natural bait fisherman, look to the Emcast BR LT to put your presentation at the take. Specifications: Bearing:  3BB + 1  Gear Ration:  5.2:1 Line Per Crank:  28.7 Weight (oz):  10.4 Mono Capacity:  6/160, 8/110   J Braid Capacity:  8/200, 10/170 Drag Max:  22

Emcast BR LT Spinning Reel - ECLTBR3000  The Emcast Bite N’ Run feature allows the line to pay off the reel when a gamefish takes a live or natural bait. Once the line is paying off the reel, the refined Auto Clutch will put the reel in gear allowing a solid hook set. It is much more controlled than simply opening up the bail, the traditional method used when fishing natural baits with spinning reels.  The reel designs are in the LT Concept of light yet tough. The Carbon Light Body is substantially lighter yet just as strong as traditional materials. To further the concept, the Air Rotor is also lighter yet just as strong. A slick Machined Aluminum Handle is powerful yet comfortable to the hand. When a gamefish is taking a bait offering and the reel is put in gear, the ATD or Advanced Tournament Drag System, utilizing a proprietary grease, allows the smooth payoff of line no matter how long the run. A 5.2 to 1 Gear Ratio shades the reel toward pulling power. If you are looking for an exciting reel tailored for the live and natural bait fisherman, look to the Emcast BR LT to put your presentation at the take. Specifications: Bearing:  3BB + 1  Gear Ration:  5.2:1 Line Per Crank:  30.6 Weight (oz):  10.6 Mono Capacity:  8/160, 10/130   J Braid Capacity:  8/220, 10/185 Drag Max:  22

Emcast BR LT Spinning Reel - ECLTBR4000-C The Emcast Bite N’ Run feature allows the line to pay off the reel when a gamefish takes a live or natural bait. Once the line is paying off the reel, the refined Auto Clutch will put the reel in gear allowing a solid hook set. It is much more controlled than simply opening up the bail, the traditional method used when fishing natural baits with spinning reels.  The reel designs are in the LT Concept of light yet tough. The Carbon Light Body is substantially lighter yet just as strong as traditional materials. To further the concept, the Air Rotor is also lighter yet just as strong. A slick Machined Aluminum Handle is powerful yet comfortable to the hand. When a gamefish is taking a bait offering and the reel is put in gear, the ATD or Advanced Tournament Drag System, utilizing a proprietary grease, allows the smooth payoff of line no matter how long the run. A 5.2 to 1 Gear Ratio shades the reel toward pulling power. If you are looking for an exciting reel tailored for the live and natural bait fisherman, look to the Emcast BR LT to put your presentation at the take. Specifications: Bearing:  3BB + 1  Gear Ration:  5.2:1 Line Per Crank:  32.5 Weight (oz):  11.3 Mono Capacity:  12/160, 14/140   J Braid Capacity:  10/220, 15/185 Drag Max:  26.4

Emcast BR LT Spinning Reel - ECLTBR5000-C The Emcast Bite N’ Run feature allows the line to pay off the reel when a gamefish takes a live or natural bait. Once the line is paying off the reel, the refined Auto Clutch will put the reel in gear allowing a solid hook set. It is much more controlled than simply opening up the bail, the traditional method used when fishing natural baits with spinning reels.  The reel designs are in the LT Concept of light yet tough. The Carbon Light Body is substantially lighter yet just as strong as traditional materials. To further the concept, the Air Rotor is also lighter yet just as strong. A slick Machined Aluminum Handle is powerful yet comfortable to the hand. When a gamefish is taking a bait offering and the reel is put in gear, the ATD or Advanced Tournament Drag System, utilizing a proprietary grease, allows the smooth payoff of line no matter how long the run. A 5.2 to 1 Gear Ratio shades the reel toward pulling power. If you are looking for an exciting reel tailored for the live and natural bait fisherman, look to the Emcast BR LT to put your presentation at the take. Specifications: Bearing:  3BB + 1  Gear Ration:  5.2:1 Line Per Crank:  34.5 Weight (oz):  11.1 Mono Capacity:  14/250, 20/160   J Braid Capacity:  15/320, 20/280 Drag Max:  26.4

Eliminator Spinning Reel - Eliminator8000  The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.  The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS. Specifications: Bearing:  4BB + 1RB  Gear Ration:  5.3:1 Line Per Crank:  53.3 Weight (oz):  29.8 Mono Capacity:  20/550, 25/440, 30/370   J Braid Capacity:  65/590, 80/440 Drag Max:  26.4

Eliminator Spinning Reel - Eliminator2500  The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.  The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS. Specifications: Bearing:  4BB + 1RB  Gear Ration:  5.6:1 Line Per Crank:  33.2 Weight (oz):  9.9 Mono Capacity:  6/210, 8/170, 10/140   J Braid Capacity:  20/170, 30/120 Drag Max:  13.2

Eliminator Spinning Reel - Eliminator3000  The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.  The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS. Specifications: Bearing:  4BB + 1RB  Gear Ration:  5.6:1 Line Per Crank:  37.4 Weight (oz):  11.3 Mono Capacity:  8/240, 10/200, 12/170   J Braid Capacity:  12/240, 30/190 Drag Max:  15.4

Eliminator Spinning Reel - Eliminator4000  The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.  The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS. Specifications: Bearing:  4BB + 1RB  Gear Ration:  5.7:1 Line Per Crank:  39.9 Weight (oz):  14.5 Mono Capacity:  10/300, 12/260, 14/210   J Braid Capacity:  30/280, 40/200 Drag Max:  17.6

Eliminator Spinning Reel - Eliminator4500  The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.  The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS. Specifications: Bearing:  4BB + 1RB  Gear Ration:  5.7:1 Line Per Crank:  43.1 Weight (oz):  21.7 Mono Capacity:  14/350, 17/280, 20/210   J Braid Capacity:  40/340, 50/270 Drag Max:  17.6