Tab Lock Base Allows for easy removal and replacement of Lake-Troll, Sport-Troll™, Easi-Troll, and Mini-Mag™ downriggers. Built with heavy-duty Lexan® for corrosion and UV resistance. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adjustable Dual Ball Mount Adjustable Dual Ball Mount System, 2" Sq. Shank, 2" Ball 10,000 lbs. (GTW), 2-5/16" Ball 14,000 lbs. (GTW) Features: Adjustable height - Perfect for towing multiple trailers of varying heights and couplers Height adjusts up to 10.5" 2" (10K GTW) and 2-5/16" (14K GTW) Hitch balls Fits 2" receivers and rated up to 14K GTW Cast shank, variable height capability Knurled bolt pins with secure lanyard Black powder coat finish WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM® Tab-Lock™ Holder for 9"-10.5" Tablets with Heavy Duty Cases The RAM-HOL-TABL20U consists of a spring loaded back plate, custom support cups and locking mechanism offers theft deterrence and unwanted tampering in public settings. This spring loaded design makes it easy to load and unload your iPad Air, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your iPad, allowing access to audio jacks, usb, power, and other ports, your iPad can be used just as it was intended. Quickly lock the cradle, keeping your iPad Air secure and safe from theft. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Note: Product consists of holder only. Case not included.  Features: Spring-loaded, key locking holder secures most 9" tablets with heavy-duty cases; interchangeable end cups allow you to modify the holder when upgrading devices Compatible with B and C size RAM® round ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Made of high-strength composites for durability and reliability in the most demanding environments Backed by a lifetime warranty Hardware Included: Assembly Hardware (2) #8 x 5/8" Sheet Metal Screws (2) M4 x 32mm Machine Screws (2) M4 Nylock Nuts (2) Keys Holder Dimensions: Height Range: 9.25" - 12.125" Width Range: 6.55" - 7.43" Depth Range: .3" - .875" Specifications: Hole Pattern: 4-Hole AMPS 1.181" x 1.496" Materials: High strength composite

RAM® Tab-Lock™ Tablet Holder for 10" Tablets with Case + More  The RAM® Tab-Lock™ spring-loaded, quick-release cradle with a keyed lock offers a secure fit with easy access to the mounted tablet. The keyed lock offers theft deterrence and unwanted tampering in public settings. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab 4 10.1 and Tab S 10.5 with an Otterbox Defender case, but also support many other tablet models and industrial tablet PCs. The spring-loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. The included back plate is interchangeable with various-size support cups, making it compatible with numerous tablet models. The detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. A set of four nuts and bolts is included to connect the cradle to any RAM components or mounts that contain the universal AMP hole pattern. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. The product consists of a holder only. Case not included. Features: Locking mechanism for theft deterrence Support cups contain open slots to accommodate tablets of various sizes The back plate can support various sizes of cups Spring-loaded tension provides secure support and quick release for your tablet Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (2) #8 x 5/8" Sheet Metal Screws, (2) M4 x 32mm Machine Screws, (2) M4 Nylock Nuts, (2) Keys Holder Dimensions: Height Range: 9.64" - 12.32", Width Range: 6.13" - 7.4", Depth Range: .13" - .7" Hole Pattern: 4-Hole AMPS: 1.181" x 1.496" Materials: High-strength composite Packaging Type: Poly Bag Weight: 1.25 lbs

Lake-Troll™ Get into the strike zone and let the fish come to you. GET IN THE GAME These hardworking, durable downriggers are ideal for smaller boats and fishermen just beginning to realize the advantage of fishing a downrigger. Our manual downriggers are built to deliver trusted Cannon® performance while standing up to harsh saltwater conditions. The Lake-Troll™ uses a clutch/brake for controlled, safe descent without cranking. Features a durable copolymer boom and a convenient line release mounted on a tab-lock base. Break into downrigging with one of our highly capable manual models. Features: Vertical spool designed with clutch/brake system for safe, controlled one-handed weight descent Quick mount tab-lock base Swivel-head depth counter 18" copolymer boom Pre-spooled with 100 feet of stainless steel cable Includes line release and tube style rod holder Saltwater-resistant construction Limited lifetime warranty WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM Universal LARGE Tab-Lock Holder for 10" Screen Tablets including the Apple iPad, iPad 2, iPad 3, iPad HD, Motorola XOOM & Motorola XOOM 2 Almost everyone wants a tablet pc so don't let someone get yours for free. Keep it safe with the new RAM locking Tab-Lock tablet holder. This product is sure to make most would-be thieves think twice about trying to steal yours. Our easy to use locking holder not only looks great and performs flawlessly, but it is compatible with RAM's full line of mounting solutions ideally suited for personal and fleet use. Spring loaded and form fitting, this compact yet durable holder won't take up a lot of space yet provides loads of security. With the new Tab-Lock tablet holder, RAM lets you keep your tablet where it belongs...in your possession. The Tab-Lock will fit the following devices with or without case, skin or sleeve: Apple iPad Apple iPad 2 Apple iPad 3 Apple iPad HD Asus EEE Pad Asus Eee Pad Transformer HP TouchPad Lenovo LePad Slate LG G-Slate LG Optimus Pad Motorola XOOM Motorola XOOM 2 10.1 Pandigital R90A200 Samsung Galaxy Tab 8.9 Samsung Galaxy Tab 10.1 Samsung Galaxy Tab 2 10.1 Toshiba Thrive Features: Multiple support cups contain open slots to accommodate for tablets of varying dimensions Spring loaded for ease of removal and insertion of your tablet Full access to all ports Customize height of holder for your tablet Locking mechanism for theft deterrence Material: High Strength Composite Included with Purchase: (1) Spring loaded locking back plate (2) Support cups for thin tablets (2) Support cups for wide tablets Mounting hardware Note: The "U" in the part number reflects product packaged in poly bag. Round base adapter not included with purchase. To insure your mount is "theft deterrent" proof, it is recommended that the RAM-KNOB3LU be purchased; this part attaches to the mount.

Suction Cup Twist Lock Base Mount w/X-Grip II Part #: RAM-B-166-UN8U Consists of the universal spring loaded X-Grip II? holder, socket system and 3.25" suction cup twist lock base. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. X-Grip II consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. It expands and contracts for perfect fit of most 7" tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip II. Compatible Devices: Amazon Kindle Archos 7 Asus EEE Pad Memo Barnes & Noble NOOKcolor BlackBerry PlayBook Dell Streak 7 HTC Flyer Samsung Galaxy Tab (7" version) Holder Dimensions: Minimum Width = 2.25" (Devices 2.25" in width must be a minimum of 7" in height to fit) Maximum Width = 5.75" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the holder for quick release of your tablet Material: High Strength Composite, Rubber Tips and Powder Coated Marine Grade Aluminum

RAM Tab-Lock Universal Locking Cradle f/Apple iPad w/LifeProof & Lifedge Cases The RAM-HOL-TABL17U consists of a spring loaded back plate, custom support cups and locking mechanism. This spring loaded design makes it easy to load and unload your iPad, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your iPad, allowing access to audio jacks, usb, power, and other ports, your iPad can be used just as it was intended. Quickly lock the cradle, keeping your iPad secure and safe from theft. The RAM Tab-Lock cradle is compatible with the following tablets: 10" Screen Tablets with LifeProof nüüd cases 10" Screen Tablets with Lifedge cases 10" Screen Tablets with heavy duty cases Tab-Lock Cradle Dimensions: Height: 8.75" minimum to 10.75" maximum Width: maximum to 8.25" Depth: maximum to 1.1" Tab-Lock Cradle Features: 1. Locking mechanism for theft deterrence 2. Support cups contain open slots to accommodate for tablets of various sizes 3. Back plate can support various size support cups 4. Spring loaded tension provides secure support for your tablet 5. Spring loaded cradle allows for quick release of your tablet 6. High strength materials maximize longevity of cradle 7. Full access to all ports 8. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

Tab-Lock™ Locking Cradle f/Apple iPad mini 1-3 with Case, Skin & Sleeve The RAM-HOL-TABL12U consists of a spring loaded backplate, custom support cups and locking mechanism for the iPad mini WITH skin, sleeve or case. This spring loaded design makes it easy to load and unload your iPad mini, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your iPad mini can be used just as it was intended. Quickly lock the cradle, keeping your iPad mini secure and safe from theft. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 6.75" to 8.75" Width: 5.06" to 5.68" Depth: 0.13" to 1" Note: Product consists of holder only. Case not included. Features: 1. Locking mechanism for theft deterrence 2. Support cups contain open slots to accommodate for tablets of various sizes 3. Back plate can support various size support cups 4. Spring loaded tension provides secure support for your tablet 5. Spring loaded cradle allows for quick release of your tablet 6. High strength materials maximize longevity of cradle 7. Full access to all ports 8. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The RAM-HOL-TABL12U is not compatible with the iPad mini 1-3 with LifeProof case. Weight: 1.15 lbs.

Low-Profile Swivel Base Heavy-duty Lexan® and stainless steel swivel base. 1 1/8" tall. Six-point locking including two 45-degree positions. Measures 5" x 5" x 1 1/8". For all Cannon downriggers. Includes four 1/4" - 20 x 1 truss head screws WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM® 1" Risers for RAM® Tab-Tite™ & RAM® Tab-Lock™ Holders Stand off risers provide additional height to RAM holders, accommodating extra space for tablets with support accessories including hand straps and kick stands. Adding an additional 1" in height, stand off risers are the perfect accessory for IntelliSkin® cases with HandStand™ Tablet Hand Strap and Kick Stand. The included hardware allows for easy attachment to RAM Tab back plates. Features: Risers provide extra space between device and holder to support accessories like the GDS® HandStand™ Included hardware allows for easy attachment to RAM® Tab-Lock™ and RAM® Tab-Tite™ backplates Made of high-strength composites for durability and reliability in the most demanding environments Backed by a lifetime warranty Dimensions: Height: 1.12" Height (when attached to back plate): 1" Width: 4.34" Depth: 0.31" Hardware Included: (4) 9/16" Stand-Offs (10) #4 x 1.5" Sheet Metal Screws Materials:  High strength composite

NEW - Innovative Trolling System Puts You In Control No matter how you fish - or what your fish for - you can customize our new trolling system to fit your style. Our new rod holders feature a pistol grip design for one-handed adjustment of the rod angle and a ratcheting system for easy rod removal. Made of High-strength aluminum to withstand the punishment of big water use and can be changed out in a snap with our unique track system. Adjustable Rod Holder Single Axis This 10" holder utilizes 6 up and down locking positions, and delivers 90° of side-to-side rotation. A pistol grip release allows for quick, one-handed angle changes, and the innovative ratcheting adjustment system allows you to quickly pull the holder to a vertical position. Includes a UV-resistant end cap to protect rod and reel. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NEW - Innovative Trolling System Puts You In Control No matter how you fish - or what your fish for - you can customize our new trolling system to fit your style. Our new rod holders feature a pistol grip design for one-handed adjustment of the rod angle and a ratcheting system for easy rod removal. Made of High-strength aluminum to withstand the punishment of big water use and can be changed out in a snap with our unique track system. Adjustable Rod Holder Dual Axis Experience 360° of rotation at the push of a button with this 10" holder. It features six up and down locking positions, a pistol grip release for quick, one-handed angle changes and a ratcheting adjustment system that allows you to quickly position the holder vertically. Includes a UV-resistant end cap to protect rod and reel WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

U-Bolt Base Mount w/X-Grip II Part #: RAM-B-149Z-UN8B Consists of the universal spring loaded X-Grip II holder, double socket arm and zinc coated metal u-bolt that will accommodate rails from 0.5" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5". X-Grip II consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. It expands and contracts for perfect fit of most 7" tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip II. Compatible Devices: Amazon Kindle Archos 7 Asus EEE Pad Memo Barnes & Noble NOOKcolor BlackBerry PlayBook Dell Streak 7 HTC Flyer Samsung Galaxy Tab (7" version) Holder Dimensions: Minimum Width = 2.25" (Devices 2.25" in width must be a minimum of 7" in height to fit) Maximum Width = 5.75" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the holder for quick release of your tablet Material: High Strength Composite, Rubber Tips and Powder Coated Marine Grade Aluminum

LightArmor Fold Down 12" All Around Light 2nm w/Cam-Lock Base Two-mile, 360° visibility for use on boats up to 39.4' (12M) Fold-Down bases allow light to swing 180° Big cam-lock, handle is easy to grasp Once locked, stays locked in normal conditions In extreme conditions, if a 12ft/lb. force hits the base, the cam lock releases and allows base to swing down, reducing the chance of breakage to base or pole All wiring is concealed and protected within the pivoting base Materials are non-corrosive. Bases are glass-filled polymer and poles are highly anodized aluminum or sturdy black plastic Bases install with two #10 fasteners Attwood's proprietary optics design draws only 1.8W at 12VDC - the lowest power draw of any 2-mile all-round light on the market today. Lights are rated for 50,000+ hours of use and feature a 10 year warranty. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.