|
Clamp Mount
Lets you mount your Cannon Sport-Troll, Easi-Troll or Mini-Mag downrigger on the gunwale or transom of your boat.
Aluminum mount has a comfortable hand knob with heavy-duty coarse-thread screw that opens 2". This adds portability to your downriggers.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
68.99 |
|
|
Square Post Clamp Mount for Posts Up to 2.5" Wide
The RAM-101U-247-25 consists of a double socket arm, round 2.5" diameter round base with the universal AMPS hole pattern and 2.5" clamp base. The clamp base will wrap around a maximum width of 2.5" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 1.55 lbs.
|
53.57 |
|
|
RAM® Square Post Clamp Mount for Posts Up To 3" Wide
The RAM-101U-247-3 consists of a double socket arm, round 2.5" diameter round base with the universal AMPS hole pattern and 3" clamp base. The clamp base will wrap around a maximum width of 3" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.
Specifications:
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 1.8 lbs.
|
70.80 |
|
|
RAM® Square Post Clamp Mount for Posts Up To 2.5" Wide
The RAM-101U-247-25 consists of a double socket arm, round 2.5" diameter round base with the universal AMPS hole pattern and 2.5" clamp base. The clamp base will wrap around a maximum width of 2.5" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.
Specifications:
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 1.55 lbs.
|
51.59 |
|
|
RAM® Tough-Claw™ Small Clamp Mount with Diamond Plate
The RAM-B-400-238U consists of the small RAM® Tough-Claw™ base, marine-grade aluminum double socket arm, and diamond base adapter. The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, and odd-shaped rails and bars.
The RAM® Tough-Claw™ can be clamped on rails from 0.625" - 1.14" outer diameter. The diamond base adapter contains the industry standard universal 2-hole AMPS hole pattern, which will connect to a large variety of RAM® Mount and third-party holders. The mount is designed with a RAM® 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles.
Features:
Includes a small version of the RAM® Tough-Claw™ and medium length B size RAM® double socket arm with diamond plate features industry-standard AMPS pattern and measures 2.43" x 1.31"
A small version designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter; rubber pads provide stable gripping and protection of mounting surface
Made of marine-grade aluminum, high-strength composite, and stainless steel hardware for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Clamp Range: .625" - 1.14" diameter
Socket to Socket Length: 3"
Hole Pattern: 2-Hole AMPS: 1.912"
Plate Size: 2.43" x 1.31"
Ball Size: B Size (1")
Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb
Materials: Marine-grade aluminum and high-strength composite
Packaging Type: Polybag
Weight: 0.69 lbs
|
47.82 |
|
|
RAM® Glare Shield Clamp Mount with Rear View Mirror
The RAM-B-126 consists of a glare shield clamp base, a double socket arm, and a 7" x 14" mirror. This mount is designed to mount to the lip edge of a flat surface up to 5/8" thick. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base, allowing users to connect a RAM 1" diameter arm socket and connection plates to create the perfect mount for the application.
The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles.
Specifications:
Hardware Included: Assembly hardware
Clamp Range: 0.625" max
Ball Size: B Size (1")
Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb
Materials: Marine-grade aluminum
Packaging Type: Retail box
Weight: 3.2 lbs
|
97.79 |
|
|
Coaming/Gunnel Clamp Mount
Position your rod holder or Scotty accessory virtually anywhere on the lip of your kayak's coaming. Built tough from rugged engineering grade nylon, the 433 revolutionizes the way your can fish from your sit-in kayak. The attached Gear-Head Mount allows you to quickly change rod holder positions with a simple twist. Easily fasten the 433, drop and lock your favorite Scotty Rod Holder or accessory and start fishing! A non-permanent solution for mounting fishing gear to your watercraft and getting you out there!
|
25.72 |
|
|
RAM Yoke Clamp Mount w/Double Socket Arm & Diamond Base Adapter
Part #: RAM-B-121-238U
Consists of a double socket arm, universal diamond base and yoke clamp base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. The clamp base will accommodate rails in diameter from 0.625" to 1.25". The 1" rubber ball is at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
42.52 |
|
|
RAM Yoke Clamp Mount w/Diamond Base - Long
Part #: RAM-B-121-C-238U
Universal glare shield/yoke mount with LONG double socket arm and universal diamond base adapter, is ideally suited for a day on the wing and yet easily removed for travel in the flight bag. Both strong and light weight, this new clamping base is perfect for numerous electronic devices commonly found in the cockpit. Modular in design, switch out the clamps for a perfect fit no matter what the mounting surface, or add a second ball to mount another device. Crafted to hold firm to most glare shields, yokes, or tubing, practically any aircraft can benefit from this product. Simple to use and exceptionally versatile, RAM has created another "must have" for any pilot. The RAM-B-121-C-238U fits rails or edge lips from 0.625" to a maximum of 1.25". The mounting base can also accept a second ball giving you the ultimate double ball base.
Clamp Dimensions:
Fits rails or edge lips from 0.625" to a maximum of 1.25"
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. The rail does not need to be perfectly round to mount this base.
|
49.64 |
|
|
RAM Universal Finger Grip Glare Shield Clamp Mount
Part #: RAM-B-177UN4
The RAM-B-177-UN4 consists of a glare shield clamp base, double socket arm and universal Finger Grip™ holder. Simply locate the clamp on any clamping surface up to 1.12" thick and gently snug the nylon thumb screws. The double ball & socket system will provide perfect viewing angles to get the most from your electronic device. The RAM glare shield clamp with double ball & socket system is far and away the most discrete and clean way to mount most any compact electronic device to the glare shield of your aircraft.
The RAM Composite Universal Finger Grip™ Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. The perfect solution that is the best phone mount, car mount, motorcycle mount and can be used with several other phone accessories including samsung accessories and lg accessories. The spine plate contains the universal AMPs and 1.5" x 2" hole patterns.
This mount is designed to hold the following devices:
Cell Phones (check measurements below for dimensions)
2-Way Radios
GPS Devices
Works with OtterBox (Defender, Commuter, Impact) Cases, Phones with Bumper, Twisted Metal Case and More
Perfect rugged solution for the Blackberry, HTC Evo, Droid X, iPhone, and More
Use on your Motorcycle, ATV, UTV, Car, Boat and More
Mount will attach to flat surfaces with the following dimensions:
Min: 4.4mm / 0.17"
Max: 28.0mm / 1.12"
Material:
High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
70.13 |
|
|
Hydro Clamp/Mount Adapter V2 for Tower Speaker - Black
The updated V2 clamp is part of the DS18 Hydro All Elements Series which is comprised of many components and accessories to make any build imaginable come to life. With over 50 marine grade compliant products, we have whatever you need for your ATV, UTV, Side by Side, Jeep, Motorcycle, Boat, or anything in between.
We invite you to get as creative as possible and make the loudest, clearest system on any terrain, water body, or air. Universal Fit, it's perfect for mounting towers/pods on roll bars and cages - perfect for wakeboard speakers!
Features:
Full Rounded die-cast solid aluminum
Buried wire, or open-wire mounting optional
Included 2.25", 2.5", 2.75", 3" NBR Pad
360 degree Rotational Bracket
Tilt Adjustable 30 degrees
UV-Compliant Gloss
∗Sold as an Individual
|
92.34 |
|
|
Hydro Clamp/Mount Adapter V2 for Tower Speaker - White
The updated V2 clamp is part of the DS18 Hydro All Elements Series which is comprised of many components and accessories to make any build imaginable come to life. With over 50 marine grade compliant products, we have whatever you need for your ATV, UTV, Side by Side, Jeep, Motorcycle, Boat, or anything in between.
We invite you to get as creative as possible and make the loudest, clearest system on any terrain, water body, or air. Universal Fit, it's perfect for mounting towers/pods on roll bars and cages - perfect for wakeboard speakers!
Features:
Full Rounded die-cast solid aluminum
Buried wire, or open-wire mounting optional
Included 2.25", 2.5", 2.75", 3" NBR Pad
360 degree Rotational Bracket
Tilt Adjustable 30 degrees
UV-Compliant Gloss
∗Sold as an Individual
|
92.34 |
|
|
ShadeFin Mini Clamp Mount
ShadeFin Mini's highly portable clamp mount quickly connects to any square rail, table, deck rail, or lip up to 2.25" thick and is a great solution for pontoon boat rails.
Features and Benefits:
Easily installed to most railing sizes
Includes two screws that can be securely tightened
Constructed out of aluminum-grade grade-6061 alloys with two threaded stainless steel Type-304 clamping rods
includes an injection-molded nylon cap and knobs
3-year limited warranty
Specifications:
Finish: Powder coated, misty silver
|
88.34 |
|
|
RAM® Tough-Claw™ Medium Clamp Mount with Diamond Plate
The RAM-B-404-238U consists of the medium RAM® Tough-Claw™ base, marine-grade aluminum double socket arm, and diamond base adapter. The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, and odd-shaped rails and bars.
The RAM® Tough-Claw™ can be clamped on rails from 1" to 1.6" in outer diameter. The diamond base adapter contains the industry standard universal 2-hole AMPS hole pattern, which will connect to a large variety of RAM® Mount and third-party cradles. The mount is designed with a RAM® 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles.
Specifications:
Clamp Range: 1" - 1.6" diameter
Socket to Socket Length: 3"
Hole Pattern: 2-Hole AMPS: 1.912"
Ball Size: B Size (1")
Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb
Materials: Marine-grade aluminum and high-strength composite
Packaging Type: Polybag
Weight: 0.98 lbs
|
52.62 |
|
|
No. 1071 Clamp Mount
Comes with fully portable anodized aluminum clamp for mounting on the gunnel or transom (2" opening).
Great for aluminum boats and canoes
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
91.44 |
|