|
Offshore Saltwater Line Release
Corrosion-resistant, high-tension spring is designed for heavier saltwater lines. Troll at high speeds in deep water with its heavy-duty release. Anti-fouling pins prevent line from snagging behind the gripper pads.
Part Number: 2250109
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.15 |
|
|
Offshore Line Release
Quick and easy to set even on turbulent waters; it wont damage your line by twisting, winding or looping. Spring-loaded "clothespin" design allows for all types of fishing.
Part Number: 2250106
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.15 |
|
|
Offshore Stacker
Adds the ability to fish at multiple depths off a single weight with the popular Offshore Line Release.
Part Number: 2250107
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
21.97 |
|
|
Magnum 10 TS Electric Downrigger
The Magnum 10 Tournament Series (TS) features a stainless steel spool, all-white construction that is seriously tough and seriously powerful. Magnum 10 TS is the go-to downrigger for serious anglers for exactly these reasons. Its ruggedness and reliability have been proven on the water, year after year. But smart anglers know Magnum 10 TS has a sophisticated side too.
Features:
Auto Up - Flip the up/down switch and your Magnum automatically retrieves your weight, stopping at the water line.
Three-Digit Depth Counter - Always know exactly where your weights are with the easy to read three-digit depth counter.
Short-Stop - When retrieving a weight, your downrigger will automatically stop it at the waterline. This eliminates cable strain caused by bouncing, stops the weight from hitting the boom end, and prevents weights from hitting the hull.
Positive Ion Control (PIC) - Your boat’s electronics create a fish-repelling negative energy field in the water. Positive Ion Control neutralizes the negative energy field so fish will stick closer to your line.
Fast Retrieval Rate - 250 feet-per-minute weight retrieval rate.
Stainless Steel Telescopic Boom - 316 marine-grade, extends from 24" to 53".
Stainless Steel Spool - Comes pre-spooled with 250' of 150 lb of stainless steel cable. Built to handle monofilament or "super lines" without snapping or breaking.
Dual Axis Rod Holder - Includes one (1) rear mount rod holder.
Removable Side Plate - Easily access the spool to switch lines, fix snags and make adjustments.
Includes - Universal Mounting Base, Low-Profile Swivel Base, line terminator, one (1) saltwater line releases, and manual crank handle.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
902.39 |
|
|
Universal Line Release
It's truly a "universal" release because it can cover so many different tension settings. It has two adjustment points to allow tension settings from 2 to 22 lb. Perfect for slow trolling with live baits or going after light-hitting walleyes. Tough enough to handle heavy saltwater plugs.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
15.58 |
|
|
Offshore Rescue Line Cutter - Fluorescent
Specifically developed for rescue operations and extreme sports (offshore racing, sport catamaran, white water sports, etc...).
Benefits:
It allows you to quickly cut ropes of small diameters (Dyneema®, ropes, straps, kite surf lines, etc...)
The secure sheath enables the stap cutter to be positioned in all situations. The sheath offers many fastening point : personally on the practitioner (life jacket, arm, leg), on different supports (cockpit, helm column, mast foot, trampoline, martingale, etc...).
Thanks to a specific treatment, the stainless steel blade offers a hardness of 70HRC for high cutting power and longevity.
Technical Data:
Blade material: stainless steel grade (70 HRC)
Blade length: 40 mm
Type of blade: plain blade
Handle material: Polyamide + glass fibers
Total length: 109 mm with sheath/102 mm without sheath
Weight: 80 gr with sheath
Accessories: shackle key integrated
Applications:
Safety on board
|
37.97 |
|
|
RAM Tough-Tube Fishing Rod Holder w/3" Length Spline Post, Combination Bulkhead/Flat Surface Base & Plunger
The RAP-394-SSBMPU consists of the TOUGH-TUBE fishing rod holder, 3" long ratchet spline post arm and combination/bulkhead/flat surface mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water.
Features:
Quick release and installation
High strength materials ensure product longevity
Compatible with all RAM & 3rd party post spline bases
Compatible with spinning reels and level wind reels
Ratchet system allows for multiple articulation points
Lanyard tie points for extra security
Custom designed for heavy chop environments
Mount virtually anywhere on heavy rigged kayaks without hinderance
Lifetime warranty
Made in U.S.A.
Dimensions:
Inner diameter: 1.9"
Inner tube length: 10" (from bottom to top of lip)
Post Spline Length: 3"
Material:
High Strength Composite
Notes:
The "U" in the part number reflects product packaged in poly bag.
|
24.85 |
|
|
RAM Tough-Tube Fishing Rod Holder w/3" Length Spline Post & Flush Mounting Base
The RAP-394-SSF consists of the TOUGH-TUBE fishing rod holder, 3" long ratchet spline post arm and square flush mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The flush mounting base contains 4 pre-drilled holes and a female socket for spline post arms. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water.
Features:
Quick release and installation
High strength materials ensure product longevity
Compatible with all RAM & 3rd party post spline bases
Compatible with spinning reels and level wind reels
Ratchet system allows for multiple articulation points
Lanyard tie points for extra security
Custom designed for heavy chop environments
Mount virtually anywhere on heavy rigged kayaks without hinderance
Lifetime warranty
Made in U.S.A.
Dimensions:
Inner diameter: 1.9"
Inner tube length: 10" (from bottom to top of lip)
Post Spline Length: 3"
Material:
High Strength Composite
Notes:
Part number reflects product packaged in clear clam shell for store shelf display.
|
23.76 |
|
|
RAM® Tough-Tube Fishing Rod Holder with 3" Length Spline Post & Round Flush Mounting Base
The RAP-394-SSFMTU consists of the TOUGH-TUBE fishing rod holder, a 3" long ratchet spline post arm, and a round flush mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The round flush mounting base is designed to accommodate gunwales up to two inches thick, and seat with no visible hardware, this product is ideally suited to a wide variety of applications. Once installed, the post spline can be removed and the hole capped making it watertight. Ideally suited for anything from Kayaks to Tournament boats, this compact and simple design is ready for your next day on the water.
Features:
Quick release and installation
High-strength materials ensure product longevity
Compatible with all RAM & 3rd party post spline bases
Compatible with spinning reels and level wind reels
The Ratchet system allows for multiple articulation points
Lanyard tie points for extra security
Custom-designed for heavy chop environments
Mount virtually anywhere on heavily rigged kayaks without hindrance
Material: High Strength Composite
Notes: The "U" in the part number reflects the product packaged in a poly bag.
Lifetime warranty
Made in U.S.A.
Specifications:
Inner diameter: 1.9"
Inner tube length: 10" (from bottom to top of lip)
Post Spline Length: 3"
|
29.47 |
|
|
Flat Line Release Clip
The Tigress line of outrigging accessories features a great selection of accessories to fit the needs of any fisherman.
Whether you have 15' skiff poles or 35' double rigged tournament poles, Tigress has a rigging accessory for you. All accessories feature top quality materials and are ready to be installed.
|
17.93 |
|
|
Stoppers for Line Releases & Auto Stop - 6 Pack
6 molded nylon stoppers for the auto stop and for locating line releases.
6 total - 3 black and 3 yellow
|
3.79 |
|
|
Hunting & Fishing Supplies
|
|
|
Lake-Troll™
Get into the strike zone and let the fish come to you.
GET IN THE GAME
These hardworking, durable downriggers are ideal for smaller boats and fishermen just beginning to realize the advantage of fishing a downrigger. Our manual downriggers are built to deliver trusted Cannon® performance while standing up to harsh saltwater conditions.
The Lake-Troll™ uses a clutch/brake for controlled, safe descent without cranking. Features a durable copolymer boom and a convenient line release mounted on a tab-lock base. Break into downrigging with one of our highly capable manual models.
Features:
Vertical spool designed with clutch/brake system for safe, controlled one-handed weight descent
Quick mount tab-lock base
Swivel-head depth counter
18" copolymer boom
Pre-spooled with 100 feet of stainless steel cable
Includes line release and tube style rod holder
Saltwater-resistant construction
Limited lifetime warranty
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
180.47 |
|
|
Uni-Troll 10
Take command of controlled depth fishing when you equip your boat with a Uni-Troll downrigger. features an innovative design that lets you pull your lines back in with less cranking effort and One-Hand Clutch Deploy for simple precise bait positioning. Built with a 2:1 retrieval speed, a low-profile swivel base and a heavy-duty telescopic boom that extends from 24" to 53".
More control at every turn.
Take command of controlled depth fishing when you equip your boat with our Uni-Troll™ manual downriggers. Perfect for smaller boats, each model allows for quick line retrieval and controlled, one-handed weight descent.
FAST RETRIEVAL RATE
Our Uni-Troll and Easi-Troll models feature an innovative design that lets you pull your lines back in with less cranking effort. The quicker you can retrieve your lines, the quicker you can get back to catching fish.
CONTROLLED WEIGHT DESCENT
Get controlled, accurate bait positioning thanks to the One-Hand Clutch Deploy on all Cannon manual downriggers. It's designed to gradually, precisely lower your weight and lure into the strike zone.
Features:
Fast, effortless 2:1 retrieval speed
One-Hand Clutch Deploy for simple, precise bait positioning
Enclosed boom end pulley prevents line jumping
Easy-Access Universal Mounting Base - same as our electric models
Dual axis rod holder - fully adjustable, both front to back and side to side
Ergonomic crank handle
Integrated ball storage hook
Three-digit depth counter
Pre-spooled with 200' of 150-lb test stainless steel cable and includes a line release
Includes - Universal Mounting Base, Low-Profile Swivel Base, line terminator, one (1) Uni-line releases, and ergonomic crank handle.
Limited lifetime warranty
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
340.90 |
|
|
Uni-Troll™ 5 ST Manual Downrigger Trolling Kit
All-in-one trolling kit
Designed for smaller boats
Includes:
Uni-Troll 5 ST Manual Downrigger
6lb Cannon Flash Weight
Universal Line Release
Swivel Base
Take command of controlled depth fishing when you equip your boat with a Uni-Troll™ downrigger - features an innovative design that lets you pull your lines back in with less cranking effort. Built with a 2:1 retrieval speed and a 24" heavy-duty boom.
Features:
Fast, efficient 2:1 retrieval speed
One-Hand Clutch Deploy for controlled, precise bait positioning
Heavy-duty 24" boom
Enclosed boom end pulley prevents line jumping
Easy-Access Universal Mounting Base (interchangeable with our electric models)
Dual axis rod holder - fully adjustable, both front to back and side to side
Ergonomic crank handle
Integrated ball storage hook
Three-digit depth counter
Pre-spooled with 200' of 150lb test stainless steel cable and includes a line release
|
351.91 |
|