All Purpose Kite - Yellow The All Purpose Kite will exceed all of your expectations and fly steady in 10-15 mph winds with a simple adjustment to the bridle, eliminating the need to use different kites for different winds.  Lightweight spars are constructed of 100% carbon graphite. Includes extra 5th spar

Kite Kit - 2-All Purpose Yellow, 2-Specialty White & Storage Bag All Purpose Kite - Yellow Features: The All Purpose Kite will exceed all of your expectations and fly steady in 10-15 mph winds with a simple adjustment to the bridle, eliminating the need to use different kites for different winds.  Lightweight spars are constructed of 100% carbon graphite. Includes extra 5th spar Specialty Lite Wind Kite - White Features: The All Purpose Kite will exceed all of your expectations and fly steady in 5-10 mph winds with a simple adjustment to the bridle, eliminating the need to use different kites for different winds.  Lightweight spars are constructed of 100% carbon graphite. Includes extra 5th spar Kite Storage Bag Features: Lightweight and waterproof 4 Velcro straps on back to easily secure to your boat Keeps your kites dry and in good condition Easy access to your assembled kites

Specialty Lite Wind Kite - White The All Purpose Kite will exceed all of your expectations and fly steady in 5-10 mph winds with a simple adjustment to the bridle, eliminating the need to use different kites for different winds.  Lightweight spars are constructed of 100% carbon graphite. Includes extra 5th spar

Series 40 Ball Bearing All Purpose Exit Block Narrow The Series 40 ball-bearing Orbit Blocks™ provides the perfect balance of strength, performance, and reliability. They offer class-leading dynamic and static load ratings, the highest available in this size of performance blocks. Lightweight and strong toughened glass fiber reinforced nylon cheeks replace stainless steel straps used in traditional utility blocks - the perfect balance of performance and reliability. As well as traditional single swivel blocks, the range also includes single and double sheave lashing or soft attachment options through to multiple sheave blocks including those with quad and quin sheaves. The range is extremely versatile allowing a multitude of possible systems right up to a 12:1 purchase mainsheet system for off-the-beach performance catamarans. Series 40 Orbit Blocks™ are fitted with our carbon-reinforced C-Cleat™ for secure rope holding with low entry and exit efforts, and fairleads for fast action from any angle. Cleat arms are made from stainless steel and are adjustable for setting to your preferred cleating angle. Ball Bearing versions incorporate our 2-stage bearing system using ball bearings to minimize friction and a secondary full-contact bearing to maintain low friction across the full working load range. High Load versions are designed specifically for any application where high dynamic or static loads are expected. They feature a high-strength grade 2205 stainless steel sheave & hub together with a triple bearing race to maintain low friction at very high loads.  Features: Class-leading dynamic and static load ratings, highest in their class Lightweight, yet strong. Toughened, glass fiber reinforced nylon replaces stainless steel straps used in our traditional utility blocks Low friction 2-stage ball bearing system for efficient and effortless trimming Soft attachment, lashing, and traditional swivel shackle head options Low profile and compact High performance cleating Applications: Mainsheet systems and spinnaker sheets on dinghies, OTB catamarans and sportsboats to 8m (26ft) Halyard, vang and backstay applications on boats to 9m (30ft) Control line applications on larger yachts Specifications: Sheave Ø: 1-9/16 in. Max. Rope Ø: 5/16 in. M.W.L.: 880/1760 lb. B. L.: 3530 lb. Weight: 9.5 oz.

Series 40 All Purpose Block - Single Cheek Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing.Can be mounted on masts and booms using the curved surface adapter. Can be stacked to create a double version, but no more than 60% of the rated working load should be applied to the upper sheave. Stackable with Ronstan Series 40 deck organizers. Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8m (26ft) Materials: U.V. stabilised Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Alloy cheek plates

Series 40 All Purpose Deck Organizer - 2 Sheave Features: Lightweight design with cheek cut outs for easy bearing maintenance Through hub mounting for maximum strength All-purpose bearing system provides maximum static load capacity Mount with 4 x 6mm (1/4”) fasteners, not supplied Length 116mm (4 9/16") Deck organizers are an effective means of deflecting halyards and other control lines to winches, stoppers and cleats. Sheaves are made from impact resistant Acetal. The deck organizers have alloy cheeks, flared at rope entry and exit points to minimize chafing. All sizes can be stacked to create double versions - MWL of the top sheaves must not exceed 50% of the total block load rating. Applications: Line deflection on larger yachts (depending on load and angle of deflection) Halyard and control line deflection on boats to 11m (36ft) Materials: Cheek plates: Anodized aluminium U.V. stabilized Acetal sheaves Grade 316 stainless steel hubs

Series 40 All Purpose Deck Organizer - 3 Sheave Features: Lightweight design with cheek cut outs for easy bearing maintenance Through hub mounting for maximum strength All-purpose bearing system provides maximum static load capacity Mount with 5 x 6mm (1/4”) fasteners, not supplied Length - 164mm (6 15/32") Deck organizers are an effective means of deflecting halyards and other control lines to winches, stoppers and cleats. Sheaves are made from impact resistant Acetal. The deck organizers have alloy cheeks, flared at rope entry and exit points to minimize chafing. All sizes can be stacked to create double versions - MWL of the top sheaves must not exceed 50% of the total block load rating. Applications: Line deflection on larger yachts (depending on load and angle of deflection) Halyard and control line deflection on boats to 11m (36ft) Materials: Cheek plates: Anodized aluminium U.V. stabilized Acetal sheaves Grade 316 stainless steel hubs

Series 50 All Purpose Cheek Block - Single Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating Acetal polymer sheave ensures low friction and extreme durability All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing.Can be mounted on masts and booms using the curved surface adapter. Can be stacked to create a double version, but no more than 60% of the rated working load should be applied to the upper sheave. Mount with 3mm x 6mm (1/4") fasteners (not supplied). Applications: Mainsheet and halyard applications, vang and spinnaker control lines on boats to 10m (33ft) S60 - on boats up to 12m (40ft) Materials: Alloy cheeks

1111 All-Purpose Gear Bag - 24" This all-purpose gear bag is perfect for bulky tools and accessories, has 7 outside pockets, abrasion resistant rubber feet, padded handles and a padded shoulder strap for easy carrying.  Features: All-purpose gear bag perfect for carrying air hoses, power tools, extension cords, etc. Outside pockets to organize small tools or accessories. Padded adjustable shoulder strap. Abrasion resistant rubber feet. Padded carrying handles. Dimensions (L x W x H) - 24" x 12" x 12" *Sold as an Individual  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Straight Barbed All-Purpose Drain - White 1-3/8" White Concaive Head Drain. These molded drains, available in straight and 90-degree versions, offer a low-cost method to drain water from virtually anywhere. They have a very low-profile concave head to allow complete drainage. Drains mount easily in a 1-3/8" diameter hole and are secured with the molded nut that is included. Hose barbs fit a 3/4" hose for routing of drainage. Specifications: Color: White Fits Hole Diameter: 1-3/8" Water Connection: 3/4" Hose

Series 40 All Purpose Block - Single - Universal Head All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing.Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required. Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave Captive Lock™ universal head Slotted pin shackle eliminates fouled lines Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26') Materials: U.V. stabilized Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Grade 316 stainless steel load strap and head fitting Specifications: Sheave Ø: 40mm(1-9/16") Max. Rope Ø: 10mm(7/16") Pin Ø: 5mm(3/16") M.W.L.: 400kg(880lbs) B. L.: 1,000kg(2,200lbs) Weight: 71g(2.5oz)

Series 40 All Purpose Block - Single - Loop Top All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26') Materials: U.V. stabilized Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Grade 316 stainless steel load strap and head fitting Specifications: Sheave Ø: 40mm(1-9/16") Max. Rope Ø: 10mm(7/16") Pin Ø: 5mm(3/16") M.W.L.: 400kg(880lbs) B. L.: 1,000kg(2,200lbs) Weight: 54g(1.9oz)

Series 40 All Purpose Block - Single - Becket - Universal Head All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required. Becket pin is removeable so line can be spliced prior to fitting and is ingeniously locked into position without the use of a clevis pin, split ring or tools Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave Captive Lock™ universal head Slotted pin shackle eliminates fouled lines Snap fit removable becket pin Spare parts - RF150 Shackle, RF41010 Replacement Becket Pin Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26') Materials: U.V. stabilized Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Grade 316 stainless steel load strap and head fitting Specifications: Sheave Ø: 40mm(1-9/16") Max. Rope Ø: 10mm(7/16") Pin Ø: 5mm(3/16") M.W.L.: 400kg(880lbs) B. L.: 1,000kg(2,200lbs) Weight: 80g(2.8oz)

Series 40 All Purpose Block - Single - Stand Up All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Becket pin is removeable so line can be spliced prior to fitting and is ingeniously locked into position without the use of a clevis pin, split ring or tools. Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave Snap fit removable becket pin Spare parts - RF41010 Replacement Becket Pin Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26') Materials: U.V. stabilized Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Grade 316 stainless steel load strap and head fitting Specifications: Sheave Ø: 40mm(1-9/16") Max. Rope Ø: 10mm(7/16") M.W.L.: 400kg(880lbs) B. L.: 1,000kg(2,200lbs) Weight: 61g(2.2oz)

Series 40 All Purpose Block - Single - Stand Up All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required. Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave Captive Lock™ universal head Mount with 2 x 5mm (3/16") fasteners (not supplied) Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26') Materials: U.V. stabilized Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Grade 316 stainless steel load strap and head fitting Specifications: Sheave Ø: 40mm(1-9/16") Max. Rope Ø: 10mm(7/16") M.W.L.: 400kg(880lbs) B. L.: 800kg(1,760lbs) Weight: 72g(2.5oz)