|
Bait Box with Aerator - 8 Quart
Specifically designed and tested to keep saltwater baitfish healthy and active, these pumps can convert any size cooler or livewell into an oxygen-rich aquarium.
Features:
Aerated live bait cooler
Durable insulation
Keeps bait cool and aerated
Lift-out net liner
Lid latch prevents spilling of water/bait during travel
Includes a 14331 aerator
8 quart capacity
15" x 8.5" x 8.5"
|
57.11 |
|
|
Dual Fish Bait Bucket with Aerator Built-In
Features more durable construction and adds a series of innovative lid designs to help you maintain the health of your bait.
The Dual Bait Bucket includes a clip-on aerator (#14331) and a storage compartment built-in to the lid for worms or other bait separate from minnows.
Features:
1.3 Gallon Capacity
Insulated Liner
Built-in Compartment Lid
Aerator Clip-on Bracket
Hose Hole in Lid
Lid Housed Aerator
|
28.92 |
|
|
Bait Bucket
The live bait storage container serious anglers depend on is more durable than ever. Each Frabill Bait Bucket is engineered to help keep your minnows healthy and frisky, and its advanced lid design provides both security and easy access. A built-in clip-on bracket allows you to easily attach a battery-powered aerator; the lid features a hose hole to accommodate the aerator tubing. Sturdy carry handle for easy transport.
Features:
2.2 Gallon Capacity
Hose hole in lid for aeration
Advanced lid design for easy access
Sturdy handle for carrying
Capacity for clip on aerator
|
12.94 |
|
|
Magnum Bait Station® Replacement Aerator
This replacement aerator connects to the lid of any Frabill Magnum Bait Station model. The secret of these bait coolers is that the installation port for the aerator is integrated directly into the lid. Keep bait lively and fresh with one complete system that's easy to use and easy to open. This replacement aerator installs in just seconds to begin pumping in oxygen, instantaneously turning your cooler into a live well.
Features:
Fits any size Magnum Bait Station cooler
Runs on a 12V adapter (included) or two D batteries (not included)
Easy to install
|
27.52 |
|
|
Galvanized 2-Piece Wade Floating Bucket - 8 Quart
The Frabill pail that started it all still a fishing favorite. Removable inner bucket attaches to dock for continuous aeration.
Features:
Super tough galvanized steel
Always floats door up, thanks to interior buoyancy collar
Large easy to open access lid
Multiple aeration holes for better circulation
|
32.74 |
|
|
RAM STACK-N-STOW Bait Board w/18" Pipe, Post & Spline
The RAP-395-PSP-18U consists of the RAM STACK-N-STOW Bait Board and 18" long pipe with spline post. The bait board includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water. With various extension pole options for post and spline you can get creative with your install. Integrated features for hanging tools, lures, clippers, mounting a GoPro camera, cup holders and much more, this bait board is a feature rich option for the savvy angler. With spline post, located on the bottom of the 18" long pipe, easily integrate it to your existing spline post base, or choose from an assortment of RAM compatible bases. With the 18" long pipe, quickly rotate the bait board away from the action. Tightening of the included knob will resecure the bait board.
Features:
Magnetic surface for tools
Customized mounting options
Accessorize with phone, camera, drink cup mounts
Mounting options for boat and kayak
High strength materials ensure product longevity
Integrated features for hanging tools
Easy removal and stowage
Made in U.S.A.
Lifetime warranty
Bait Board Dimensions:
Length: 10"
Width: 13"
Depth: 1.625"
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
35.64 |
|
|
RAM STACK-N-STOW Bait Board w/Combination Bulkhead Rail Adapter Kit
The RAP-395-RMU consists of the RAM STACK-N-STOW Bait Board, 3" long spline post and bulkhead rail adapter kit. The bait board includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water. With various extension pole options for post and spline you can get creative with your install. Integrated features for hanging tools, lures, clippers, mounting a GoPro camera, cup holders and much more, this bait board is a feature rich option for the savvy angler. This mount joins two plates with the screws provided and turns the flate base into a rail base. The adapter is a U shape, so it can wrap around a tube mount and the clamp by joining to the flat base. The bait board will also accomodate pipes and extension poles with a diameter of 1".
Features:
Magnetic surface for tools
Customized mounting options
Accessorize with phone, camera, drink cup mounts
Mounting options for boat and kayak
High strength materials ensure product longevity
Integrated features for hanging tools
Easy removal and stowage
Made in U.S.A.
Lifetime warranty
Bait Board Dimensions:
Length: 10"
Width: 13"
Depth: 1.625"
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
45.07 |
|
|
RAM STACK-N-STOW Bait Board w/Combination Bulkhead/Flat Surface Base & Plunger
The RAP-395-BMPU consists of the RAM STACK-N-STOW Bait Board, 3" long spline post and combination bulkhead/flat surface mounting base. The bait board includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water. With various extension pole options for post and spline you can get creative with your install. Integrated features for hanging tools, lures, clippers, mounting a GoPro camera, cup holders and much more, this bait board is a feature rich option for the savvy angler. The mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. The bait board will also accomodate pipes and extension poles with a diameter of 1".
Features:
Magnetic surface for tools
Customized mounting options
Accessorize with phone, camera, drink cup mounts
Mounting options for boat and kayak
High strength materials ensure product longevity
Integrated features for hanging tools
Easy removal and stowage
Made in U.S.A.
Lifetime warranty
Bait Board Dimensions:
Length: 10"
Width: 13"
Depth: 1.625"
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
38.47 |
|
|
EDGE 3700 Spinner Bait Box
Features:
Innovative Spinnerbait retainers hold up to (36) baits in a traditional StowAway
Dri-Loc® O-ring seal
Rustrictor™ technology delivers 360 degrees of rust-preventative protection
EZ Label™ system for quick identification of contents
DuraView™ crystal-clear polycarbonate lid
|
27.00 |
|
|
EDGE 3700 Swimbait Box
Built specifically for hard and soft swimbaits, the Plano EDGE 3700 Swimbait Box stores and protects up to 24 individual rigged swimbaits. Designed to keep baits separated and protected, the Plano EDGE Swimbait Box uses gravity to suspend swimbaits and glide baits, elevating them inside the box to prevent tail deformation and preserve bait action. Protective features include Rustrictor corrosion and rust-preventive technology, plus a Dri-Loc O-Ring watertight seal to keep out moisture. WaterWick dividers with moisture-wicking packets protect against rust and corrosion as well. Finished with an EZ label system that allows anglers to quickly identify what’s inside, the Plano EDGE 3700 Swimbait Box is a no-brainer for anglers looking to protect their high-end swimbaits.
Features:
Protects and stores up to 24 swimbaits
Dri-Loc O-ring watertight seal
WaterWick Dividers
EZ label system
Steel pin hinges
One hand latch
Specifications:
Dimensions: 14"L x 9"W x 2.63"H
|
38.57 |
|
|
EDGE™ Vertical Jig & Spybait Box
Every feature on Plano’s EDGE™ series is part of a well-thought-out system to help you be a better angler. With a family of 18 boxes offering both general purpose and specialized storage that fits into the current Plano sizing system, they will prolong the life of your tackle and give you an edge on the water. One quick glance shows these tackle boxes are different. Look closer and you’ll find they’re not only different – they’re better in every way possible.
Make it your own. The EDGE Flex Series adds ultimate versatility to Plano’s popular EDGE boxes. Every EDGE Flex tackle box includes a fully customizable internal r system plus all the bells and whistles from the standard EDGE line.
Features:
Holds up to 52 baits
WaterWick™ divider with reusable moisture-wicking packet
Dri-Loc® O-ring seal maintains waterproofing when closed
Rustrictor™ technology delivers 360 degrees of rust preventative protection
EZ Label™ system for quick identification of contents
Dimensions: 14"L x 9"W x 1.88"H
|
29.18 |
|
|
EDGE 3700 Jerkbait Box
Built to store and protect up to 20 individual jerkbaits, the Plano EDGE 3700 Jerkbait Box works to keep your baits separated, safe, and in one place. Loaded with protective features, the Plano EDGE 3700 Jerkbait Box includes Rustrictor corrosion and rust prevention technology to keep your high-dollar ripbaits in tip-top shape. To further combat unwanted moisture intrusion, the Plano EDGE 3700 Jerkbait Box features a Dri-Loc O-ring watertight seal that shields your jerkbaits from boat spray and precipitation.
As rugged as it is smartly designed, the Plano EDGE 3700 Jerkbait Box features a DuraView crystal-clear polycarbonate lip and steel pin hinges that provide long-lasting dependable functionality. Complete with an EZ label system for quick identification, the Plano EDGE 3700 Jerklbait Box provides a purpose-built, application-specific design that will keep your jerkbaits organized and safe.
Features:
Dimensions: 14”L x 9”W x 1.88”H
Store and protect up to 20 individual jerkbaits
Dri-Loc O-ring watertight seal
Waterwick divider
EZ Label system
DuraView crystal-clear polycarbonate lid
Rustrictor rust prevention technology
Steel pin hinges
One-hand latch
|
38.57 |
|
|
EDGE™ FLEX™ Crankbait Box
Every feature on Plano’s EDGE™ series is part of a well-thought-out system to help you be a better angler. With a family of 18 boxes offering both general purpose and specialized storage that fits into the current Plano sizing system, they will prolong the life of your tackle and give you an edge on the water. One quick glance shows these tackle boxes are different. Look closer and you’ll find they’re not only different – they’re better in every way possible.
Make it your own. The EDGE Flex Series adds ultimate versatility to Plano’s popular EDGE boxes. Every EDGE Flex tackle box includes a fully customizable internal r system plus all the bells and whistles from the standard EDGE line.
Features:
FLEX™ System includes 28 interchangeable Crankbait Catcher pods
WaterWick™ divider with reusable moisture-wicking packet
Dri-Loc® O-ring seal maintains waterproofing when closed
Rustrictor™ technology delivers 360 degrees of rust-preventative protection
EZ Label™ system for quick identification of contents
DuraView™ crystal-clear polycarbonate lid
Dimensions: 14"L x 9"W x 2.63"H
|
33.76 |
|
|
Hydro-Flo™ Spinnerbait Box - Clear
Features:
Holds 72 spinnerbaits
Does not include spinnerbaits
Swivel carry handle
Three adjustable spinnerbait racks
Hydro-Flo™ holes allow wet tackle to dry naturally
Secure ProLatch™ closure
Color: Clear
Dimensions: L=9.75in. x W=4.75in. x H=4.25in.
|
11.57 |
|
|
Hip Roof Tackle Box w/6-Trays - Green/Sandstone
The Hip Roof Tray Box has 20% more bulk storage than previous models and larger trays. With the adjustable dividers, you can create 38-46 compartments for all your tackle.
Features:
More Bulk Storage Space and Larger Trays
6-Trays Create 38-46 Compartments
Integrated Lure Trays and Can Holders on the Lid
Dimensions: 20"L x 11.25"W x 10.75"H
|
42.41 |
|