|
Amt 5351-95, Cast Iron Coolant Pump 230/460volt
INTERCHANGEABLE IMMERSION & SUCTION COOLANT OIL PUMPS
1/4 HP Totally Enclosed Motor (TEFC)
Three Phase Motor
230/460 volts 0.8/0.4 amps
Stainless Steel or Composite Semi-open Impeller Options
Immersion and Suction Types
Cast Iron Construction
Handles Viscosity up to 500 SSU
Standard Replacement for Machine Tool Industry
Delivers up to 56 GPM and 26 PSI
3/4" FNPTOutlet
AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.
AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.
|
507.94 |
|
|
Simer 2810E-02 Shallow Well Jet Pump, 3/4HP
Simer Shallow Well Jet Pump, Cast Iron Construction, 3/4HP 115/230 Volt Motor, 1-1/4”NPT Suction x 1”NPT Discharge Ports, Best for Shallow Wells to 20 Feet, Maximum Lift 25 Feet, up to 14.4GPM, Adjustable Pressure Switch Set to 30psi On / 50psi Off
|
566.25 |
|
|
Simer 2800 Shallow Well Jet Pump, 1/2HP
Simer Shallow Well Jet Pump, Cast Iron Construction, 1/2HP TEFC Motor 115Volt only, 1” NPT Ports, up to 5.1GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth
|
381.42 |
|
|
Simer 2805E-02 Shallow Well Jet Pump, 1/2HP
Simer Shallow Well Jet Pump, Cast Iron Construction, 1/2HP 115/230Volt Motor, 1-1/4”NPT Suction x 1”NPT Discharge Ports, Best for Shallow Wells to 20 Feet, Maximum Lift 25 Feet, up to 8.5GPM, Adjustable Pressure Switch Set to 30psi On / 50psi
|
465.00 |
|
|
Simer 3963 Submersible Sewage Pump, Pitmaster, 1/2HP
Simer Submersible Sewage Pump, Cast Iron Construction, Pitmaster, 1/2HP 115Volt, 2” NPT Discharge Port, up to 9000 GPH, 10 Foot Power Cord, Automatic or Manual Operation, Tethered Float Switch
|
699.00 |
|
|
AMT 5391-95, Immersion Coolant Oil Pump 23gpm 230/460volt
INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS
Cast Iron Construction
1/4 HP 230/460V 3 Phase Immersion Type
Shaft Seal Material: Sealless Design
Speed (RPM): 3450
Type: IMM
Voltage: 230/460
Fluid Port: 0.5"
HP:1/4
Impeller Material: Stainless Steel
GPM: 23
Replacement for Standard Machine Tool Industry Pumps
Fuji: VKP-063A
Old Fuji: VKN-061A
Mitsubishi: NQ100J
Toshiba: OPF-100M
Hitachi: CPD-100M
Yasukawa: VFPC-100
Graymills: IMV-25
AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.
AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.
|
487.69 |
|
|
AMT Pump 5411-95 Coolant Pump Cast Iron Imm
Cast Iron Immersion Type Coolant Pump
Oil Coolant Pumps
Fluid Port: 1
HP: 1
Impeller Material: Stainless Steel
Phase: 3
1" Cast Iron 1 HP 230/460V 3 Phase Immersion Type
Shaft Seal Material: Sealless Design
Speed (RPM): 3450
Type: IMM
Voltage: 230/460
|
933.12 |
|
|
AMT 5381-95, Immersion Coolant Pump Cast Iron 10gpm
INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS
1/8 HP Totally Enclosed Motor (TEFC)
Three Phase Motor
230/460 volts, 0.3/0.19 amps
Stainless Steel or Composite Semi-open Impeller Options
Immersion and Suction Types
Cast Iron Construction
Handles Viscosity up to 500 SSU
Standard Replacement for Machine Tool Industry
Delivers up to 10 GPM
3/8 inch outlet diameter
Able to pump liquid down to 2 inches
Replacement for to following Standard Machine Tool Industry Pumps
Fuji: VKP-053A
Old Fuji: VKN-051A
Mitsubishi: NQ-60J
Toshiba: OPF-60M
Hitachi: CPD-060M
Yasukawa: VFPC-061DIF
Graymills: IMV-08
Gusher: VBV-18
|
250.97 |
|
|
AMT 5390-95, Immersion Coolant Oil Pump 23gpm 115volt
INTERCHANGEABLE IMMERSION & SUCTION COOLANT OIL PUMPS
1/4 HP Totally Enclosed Motors (TEFC)
115/230 volts, 3.0/1.5amps
Single or Three Phase Motors
Stainless Steel or Composite Semi-open Impeller Options
Immersion and Suction Types
Cast Iron Construction
Handles Viscosity up to 500 SSU
Standard Replacement for Machine Tool Industry
1/2 inch FNPT Ports
Delivers up to 23 GPM and 26 PSI
Replacement For The Following Standard Machine Tool Industry Pumps
Fuji: VKP-063A
Old Fuji: VKN-061A
Mitsubishi: NQ100J
Toshiba: OPF-100M
Hitachi: CPD-100M
Yasukawa: VFPC-100
Graymills: IMV-25
Gusher: VBV-14
AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.
|
502.04 |
|
|
AMT Pump 282L-95 3Ph 2Hp Open Drip-Proof 56J 230/460
AMT Pump 282L-95, 1-1/2" Cast Iron Self-Priming Centrifugal Pump
Self-Priming Centrifugal Electric Driven Pump
HP: 2HP
Motor Frame Size: 56J
Voltage: 230/460V
Phase: 3
Shaft Seal Material: Buna-N / Stainless Steel
|
826.20 |
|
|
AMT Pump 316A-95 Sewage/Trash Pmp 2" 3Ph 3Hp
Self-Priming Electric Motor Driven Sewage / Trash Pump
2" Cast Iron 3 HP 230/460V 3 Phase TEFC
Motor Frame Size 56J
Totally Enclosed and Fan Cooled
Shaft Seal Material: Viton Silicon/Carbide
|
1309.78 |
|
|
Amt 5764-95 Sub Shredder Pump 3" Npt
SUBMERSIBLE SHREDDER SEWAGE PUMP
Cast Iron with Stainless Steel Motor Housing
Carbide-Tipped Shredder Impellers
Spiral Shredder Mechanism Plate Surface Hardened for Enhanced Cutting Ability
Silicon Carbide Lower Seal
3" NPT Port Sizes
Max. Temperature 104° F
3 HP
230 Volt
AMT Submersible Shredder Sewage pumps feature an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge type waste. Applications include sewage pumping stations, septic tanks, sewage treatment plants, dirty water drainage, flood and emergency. Also ideal for grinder type solids reduction application. Motors are rated continuous duty and single phase models have thermal overload protection.
AMT Submersible Shredder Sewage Pumps are reliable, cost effective and low maintenance.
|
1824.94 |
|
|
AMT Pump 2825-95 Pump Cast Iron Self Prime 3/4Hp 1Ph
Pump Body: Cast Iron
Shaft Seal: Buna-N Shaft Seal
Port Size: 1-1/2 inch x 1-1/2 inch NPT Ports.
Motor Specs : 3/4 Horsepower, 115/230 Volts, Single Phase, ODP (Open Drip Proof) NEMA 56J Frame Electric.
Product Specs :
Cast Iron Construction with Buna-N Seals
Handles 3/8 Inch Diameter Semi-solids
NEMA 56J Motors with Stainless Steel Shaft
Maximum Working Pressure 75 PSI
Self-primes to 20 Ft.
Self-cleaning, Clog Resistant Impeller
Steel Base and Handle Included
Dual Volute Design
|
695.25 |
|
|
Amt 2850-99 Cast Iron 1 1/4" Self Priming Pedestal Pump
AMT Self-Priming Centrifugal Pedestal pumps are designed for a wide range of industrial, agricultural and commercial applications. Dual volute design reduces radial load on bearings and motor. Heavy duty cast iron construction with Buna-N seals or stainless steel with Viton® seals. Pumps are fitted with a self-cleaning, semiopen impeller and are coupled to a heavy duty cast iron bearing housing with a CNC machined keyed shaft extension and sealed ball bearings. The pump has been designed for either direct connection or belt drive. The maximum recommended RPM is 4,000.
• Cast Iron & Stainless Steel Construction
• Buna-N Mechanical Seals on Cast Iron Models
• Viton® Mechanical Seals on Stainless Steel Models
• Optional Silicon Carbide Mechanical Seals Available
• 1-1/4˝, 1-1/2˝ or 2˝ NPT Suction and Discharge Port Sizes
• Dual Volute Design Reduces Radial Load on Motors
• Maximum Temperature
◆ Buna-N 180° F
◆ Viton® 200° F
• Self-Cleaning, Semi-Open Impeller
• Heavy Duty Cast Iron Pedestal Drive with Sealed Ball Bearings
|
41.92 |
|
|
AMT 285P-95, Self-Priming Centrifugal Pump 3/4 HP, 3 PH, 230/460 V
Cast Iron Construction
Buna-N Mechanical Seal and O-Ring with optional Viton? or Silicon Carbide Mechanical Seal and O-ring
1" & 1-1/4" NPT Suction and Discharge Ports
Dual Volute Design Reduces Radial Load on Motor
Maximum Working Pressure 75 PSI
Maximum Temperature 180 F
Self-cleaning, Semi-open Impeller
|
595.69 |
|