|
|
37.87 |
|
|
BURKS 20CS6M Close Coupled Turbine Pump
BURKS exclusive unique regenerative type turbine pumps. Designed to handle clear water in addition to and many other non-abrasive, lower viscosity liquids on high pressure. As well as low capacity applications with the greatest possible efficiency.
BURKS is the only turbine pump with Life-Lok® External Impeller Adjustment. This feature allows re adjustment of impeller without disturbing piping, disassembling pump or replacing parts. This, as a result, gives up to 40% longer service life than turbine pumps of other designs.
Self-Priming Pump
Compact and Space-saving size
No coupling so this eliminates misalignment problems
Dependable carbon/ceramic mechanical shaft seal for same temperatures to 225 °F (107° C).
Bronze impeller with Monel blades, therefore the only moving part
Bronze raceway with cast-in vortex pockets – will not vapor lock
#303 Stainless Steel pump shaft
Every pump is factory tested
Motor Information
4CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 1750 RPM and therefore Three Phase motors are 208-230/460 Volts, 60/50 Hz, 1750/1450 RPM.
CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 3450 RPM Three Phase 1, 11/2 & 2HP. – 208-230/460 Volt, 60/50 Hz., 3450/2900 RPM Three Phase 3 & 5 HP – 208-230/460 Volt, 60 Hz, 3450 RPM Standard pump motors have open drip proof construction and are rated with jet pump service factors for continuous duty operation at all ratings shown. Single phase motors are capacitor
start/induction run with built-in overload protection. Three phase motors require a magnetic type starter which provides full 3-leg overload protection. Failure to use the correct starter and overloads will void the warranty.
High Temperature
For Temperatures to 500 °F (260 °C). Series CS Pumps are available while in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications. This feature greatly extends seal life in high temperature applications.
|
3161.06 |
|
|
BURKS 10CS5M, Turbine Pump 32.5 gpm 115/230v
Burks close coupled 32.5 gpm turbine pump having 1-1/4" NPT inlet size and 1" NPT outlet size features 350 ft Maximum Head and maximum suction lift and 1 hp power rating.
Burks exclusive unique regenerative type turbine pumps are designed to handle clear water and many other non-abrasive, lower viscosity liquids on high pressure, low capacity applications with the greatest possible efficiency.
Compact space saving size
No coupling - eliminates misalignment problems
Dependable carbon ceramic mechanical shaft seal for temperatures to 225 deg F (107 deg C)
Bronze impeller with monel blades - the only moving part
Bronze raceway with cast-in vortex pockets - will not vapor lock
303 stainless steel pump shaft
Easy to service
Every pump factory tested
|
2820.38 |
|
|
BURKS 30WA6, Centrifugal Pump 115/230v 3HP
Burks 30WA6 Centrifugal Pump, Self Priming, 60 Hz, Single Phase, 3500 RPM, 3 Horsepower, ODP Motor Enclosure.
Close Coupled to a 3 Horsepower 115/230 Volts motor
Bronze Fitted Cast Iron Construction w/ Plastic Impeller.
Ports are 1-1/2 Inches NPT Inlet, 1-1/2 Inches NPT Outlet.
Please contact us for a shipping quote at http://www.clrmarine.com/Contact_Us
|
2650.46 |
|
|
BURKS 310G5-1 1/4, BURKS CIRCULATION G5 PUMP 230-440V 1HP 3PH
Centrifugal Pump and Motor unit. Bronze Fitted Cast Iron Construction. Close Coupled to a 1 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.25 Inches.
|
1605.60 |
|
|
BURKS 24CT6M, Turbine Pump 115/230v 1"Ports
Turbine Pump and Motor unit. Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/4 Horsepower, 1750 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
|
2118.60 |
|
|
BURKS 330CS7M, Turbine Pump 3HP 3PH 230/460v
Turbine Pump, Close Coupled, 60 Hz, Three Phase, 3450/2850 RPM, 3 Horsepower, ODP Motor Enclosure
Bronze Fitted Cast Iron Construction. Close Coupled to a 3 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
Contact us for shipping quote http://www.clrmarine.com/Contact_Us
|
3291.30 |
|
|
BURKS 330CS9M, Turbine Pump 3Hp 3Ph 230/460v
Turbine Pump and Motor unit. Bronze Fitted Cast Iron Construction. Close Coupled to a 3 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
|
3503.48 |
|
|
BURKS 350CS9M-FE, TURBINE PUMP 230/460v 3PH 5HP
Turbine Pump and Motor unit.
Bronze Fitted Cast Iron Construction.
Close Coupled to a 5 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
OEM version with FE Franklin Electric Motor.
|
4474.65 |
|
|
BURKS 5WT5, PUMP SELF PRIME 115/230v 1PH 1/2HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 2 Inches NPT Inlet, 2 Inches NPT Outlet.
|
1844.10 |
|
|
BURKS 7CT7M, PUMP 3/4HP 1PH 115/230v
Bronze Fitted Cast Iron Construction.
Close Coupled to a 3/4 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
|
2188.80 |
|
|
BURKS 7WT5, PUMP SELF PRIME 115/230v 1PH 3/4HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 3/4 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 2 Inches NPT Inlet, 2 Inches NPT Outlet.
UNSPSC Code: 40150000
|
1952.10 |
|
|
BURKS T37CT7MV, TURBINE PUMP 60 VOLTS 3PH 3/4HP
Bronze Fitted Cast Iron Construction.
Seal and O-ring are VITON.
Pump is close Coupled to a 3/4 Horsepower , 3450 RPM, 208-230/460 HZ , 60 Volt, 3 Phase, TEFC Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
UNSPSC Code: 40150000
|
2388.60 |
|
|
Shurflo 8090-902-248 Pump 230V 100psi
The 8000 series diaphragm pump is the most widely used Shurflo industrial pump.
Shurflo 8090-902-248, Diaphragm Pump with 230 Volt AC Motor and 100 PSI Automatic Demand Switch. Nylon Pump Body, EPDM Valves, Santoprene Diaphragm. Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female. 1.4 GPM open flow.
|
237.71 |
|
|
MP Pump
MP Pumps was organized in Detroit in 1942, shortly after America’s entry into World War II. Our first pumps were used in landing craft and other amphibious vehicles where quality and reliability were absolutely essential. After the war, we continued to grow along with our reputation for superior design, engineering and manufacturing of centrifugal pumps for wide variety of applications.
Industrial Pumps, Transportation Pumps, Agriculture Pumps, Marine Pumps, Petroleum Pumps & DEF Pumps.
|
|