|
Cat Pump 3CP1140 Plunger Pump
This is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of forged brass manifolds, 304 SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and O-rings. The 1725 RPM permits a close coupled installation using a bell housing and flexible coupling or direct-drive motor-pump unit.
Technical Specifications
Max Flow: 3.6
Min Pressure: 100
Max Pressure: 2200
Inlet Port Size: 0.5
Discharge Port Size: 0.37
RPM: 1725
Drive Type(s): Belt
|
774.00 |
|
|
Cat Pump 34964 Clutch 12 Volt
Industrial-duty clutch mated to high-performance Cat Pump increases durability and dependability. Convenient remote control of on-off function optimizes system performance. Superior strength forged rotor, hub and armature offer superior flux and maximum torque for long life. Double groove 7 pulley, A type belt and 16.5mm shaft.
Fits Cat Pumps models 280, 290, 333 and 430 piston pumps and 230, 240 and 270 plunger pumps.
Technical Specifications
Accessory Type: Clutches
Description: 3FR & 4FR Series - 7" Double Groove “A” Belt
|
369.20 |
|
|
Cat Pump 2SFQ25SEEL Direct Drive Plunger Pump
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow: 2.5 gpm / 9.5 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: 316 Stainless Steel
|
1335.36 |
|
|
Cat Pump 2SFQ29SEEL Direct Drive Plunger Pump
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow: 2.85 gpm / 10.8 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: 316 Stainless Steel
|
1335.36 |
|
|
Cat Pump 2SFQ35SEEL Direct Drive Plunger Pump
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow: 3.5 gpm / 13.2 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: 316 Stainless Steel
|
1335.36 |
|
|
Cat Pump 45116 Rod Plunger
The CAT 45116 is a replacement plunger rod for CAT 3535, 3541, 3545, and 3547C pumps. Genuine CAT replacement part, guaranteed to fit. Use to replace damaged or missing plunger rod during maintenance or repairs.
Exact replacement part, don't have to worry about tweaks or adjustments
OEM parts guarantee use of correct materials for increased longevity
OEM parts come with manufacturer support
Check with pump manual to ensure correct part number
|
335.47 |
|
|
Cat Pump 2SFQ25SEEL Direct Drive Plunger Pump with 8110 Motor.
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow: 2.5 gpm / 9.5 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: 316 Stainless Steel
Lead time about one week, this is a Special Order Item
|
1920.48 |
|
|
Cat Pumps 231 2.3GPM
Small Marine Systems (0.5 to 20 gpm, 1.9 to 75.7 lpm) Our compact, lightweight models are an ideal fit for small pleasure craft and portable units. Compact Direct Drive Models are available to meet small footprint demands and emit low noise levels.
This Cat Pump 231 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of 316 SS manifolds, 316 SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. The 1725 RPM permits a close coupled installation using a bell housing and flexible coupling or direct-drive motor-pump unit.
Technical Specifications
Max Flow:2.3
Min Pressure:100
Max Pressure:1500
Inlet Port Size:0.5
Discharge Port Size:0.37
RPM:1725
Drive Type(s):Belt
Material:Stainless Steel (SS)
The rugged durability of Cat Pumps can withstand the corrosive environment in which they are subjected and they have proven to be true workhorses in the desalination field.
|
2702.04 |
|
|
Cat Pumps 241 2.6GPM Plunger Pump
Small Marine Systems (0.5 to 20 gpm, 1.9 to 75.7 lpm) Our compact, lightweight models are an ideal fit for small pleasure craft and portable units. Compact Direct Drive Models are available to meet small footprint demands and emit low noise levels.
This Cat Pump 241 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of 316 SS manifolds, 316 SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. The 1725 RPM permits a close coupled installation using a bell housing and flexible coupling or direct-drive motor-pump unit.
Small Marine Systems (0.5 to 20 gpm, 1.9 to 75.7 lpm) Our compact, lightweight models are an ideal fit for small pleasure craft and portable units. Compact Direct Drive Models are available to meet small footprint demands and emit low noise levels.
Technical Specifications
Max Flow:3.6
Min Pressure:100
Max Pressure:1200
Inlet Port Size:0.5
Discharge Port Size:0.37
RPM:1725
Drive Type(s):Belt
Material:Stainless Steel (SS)
The rugged durability of Cat Pumps can withstand the corrosive environment in which they are subjected and they have proven to be true workhorses in the desalination field.
|
2702.04 |
|
|
Cat Pump 5CPQ6221 Plunger Pump
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Technical Specifications
Max Flow: 6 gpm / 22.7 lpm
Max Pressure: 2000
Inlet Port Size: 1/2" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1400
Drive Type(s): Belt, Clutch, Flexible Coupling and Bellhousing
Material: 316 Stainless Steel
|
3345.12 |
|
|
Cat Pumps 2SF22ES Direct Drive Plunger Pump
Pump Features:
• UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life
• Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities.
• Ultimate portability, less than 11 pounds, less than 10" long
• Regulating unloader is standard on each pump to assure system pressure control and pump protection
Specifications:
• Triplex plunger pump
• Direct drive with electric flange
• Maximum volume: 2.0 GPM
• Maximum discharge pressure: 1200 PSI
• Maximum inlet pressure: 75 PSI
• Maximum pump speed: 3450 RPM
• Minimum horsepower requirements: 1.6 BHP
• Bore: .708" (18mm)
• Stroke: .122" (3.1mm)
• Crankcase capacity: 11 oz. use CAT pump hydraulic oil
• Inlet port: 3/8" FPT
• Discharge ports: Dual 3/8" FPT
• By-pass port: 1/4" FPT
• Dimensions: 9.13" x 6.65" x 6.50"
|
606.00 |
|
|
Cat Pump 45 PLUNGER PUMP 5 FRAME
The Cat Pump 45 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of a forged brass manifold, 304SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings.
Technical Specifications
Max Flow: 4.5
Min Pressure: 100
Max Pressure: 3500
Inlet Port Size: 0.5
Discharge Port Size: 0.37
RPM: 1645
Drive Type(s): Belt
Material: Brass (BB)
|
1379.52 |
|
|
Cat Pump 357 Plunger Pump 5 Frame
The Cat Pump 357 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of Nickel Aluminum Bronze manifolds, 316 SS valve assemblies, solid ceramic plungers and standard NBR [Bunea-N] seals and o-rings. The 1725 RPM permits multiple drive options including direct drive, flexible coupling, clutch or belt drive.
Technical Specifications
Max Flow: 5
Min Pressure: 100
Max Pressure: 1500
Inlet Port Size: 0.5
Discharge Port Size: 0.37
RPM: 1725
Drive Type(s): Belt
Material: Nickel Aluminum Bronze (NAB)
|
2123.52 |
|
|
Cat Pump 43552 Plunger Ceramic
43552 Ceramic Plunger for Cat Pump 1050
|
145.34 |
|
|
Cat Pump 2SF10ES Direct Drive Plunger Pump
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with brass manifolds, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
2SF Series pumps are hollow-shafted and designed to bolt directly to either a C-face electric motor or gas engine, depending on the model, providing an easy, compact installation.
Technical Specifications
Max Flow: 1 gpm / 3.8 lpm
Max Pressure: 2000
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(M)
RPM: 3450
Drive Type(s): Direct
Material: Brass
|
606.00 |
|