4" Locker Light with Touch Switch - 10-30V - Stainless Steel This compact locker light is small enough to mount almost anywhere where light is needed. Designed to illuminate the inside of lockers, hatches, closets, and/or bilges. The light features a 316 stainless steel trim ring and a built-in on/off switch that is backlit with a blue LED so that it is easily located even in the darkest of lockers. A touch-switch sensor immediately turns on the light when activated. Features: IP65 rated for installation in wet lockers Works with 12V and 24V systems Impact-resistant plastic lens 316 Stainless Steel Trim Ring 6 Warm White LEDs (2900-3200K) Surface mount, 2 SS Screws included Specifications: 10-30V Amps: 0.03 Lumens: 210 *The "P" within the part number indicates retail packaging

4" Locker Light with Motion Sensor - 10-30V - Stainless Steel This compact locker light is small enough to mount almost anywhere where light is needed. Designed to illuminate the inside of lockers, hatches, closets, and/or bilges. The light will automatically turn on when you open the hatch or door. The sensor immediately turns on the light when triggered by a combination of movement within 6 feet and a temperature of 98 degrees. The light will shut off after 20 seconds unless there is movement. Features: IP65 rated for installation in wet lockers Works with 12V and 24V systems Impact-resistant plastic lens 316 Stainless Steel Trim Ring 6 Warm White LEDs (2900-3200K) Surface mount, 2 SS Screws included 10-30V Specifications: Amps: 0.03 Lumens: 210 *The "P" within the part number indicates retail packaging

5" Dome Light with Switch & 3 Stage Dimming - 10-30V - IP67 The LED technology used in this light provides a uniform output and eliminates hot spots common among LEDs. A touch-sensitive switch provides three-stage dimming. The brightest, mid-level, and low settings easily adjust with a touch of the on/off button. The on/off button illuminates blue to help locate it in the dark. Features: 12/24V 51 x 0.5-watt LEDs Natural White (4250K) 720 effective lumens Plastic housing with a high-impact plastic lens Surface mount, 3 stainless steel screws Included IP67 *The "P" within the part number indicates retail packaging

A2.5 4 Color Downlight with Stainless Steel Trim - 8-30V Scandvik’s A2.5 LED Down Light with class-leading output, sealed weatherproof construction, and simple 2-wire installation is a favorite amongst boatbuilders. Intelligent circuitry allows color changes from white to blue, red, and green without specialized switches or controllers. Only a simple 2-position (on/off) toggle switch is needed. Switch the light off and on again within 1.5 seconds to cycle through each of the four colors. Turning the light off for more than 1.5 seconds resets the light to white. Features: Easy to install, spring-loaded butterfly clips hold the A2.5 firmly in place Works on 12V & 24V systems The light colors are white, blue, red, and green 2 in. mounting hole Recessed mount with spring clips 286 lumens IP67 Applications: This 316 stainless steel fixture is suitable for overhead exterior locations such as T-tops, hard tops, and mezzanines *The "P" within the part number indicates retail packaging

Slim 5" Dome Light - Warm White/Blue - 10-30V This low-profile dome light has warm white and blue LEDs. Features: 12/24V, 6W 390 Lumens 26 Color LED (blue) Surface mount IP65 Touch switch Switch glows blue Specifications: Dimensions: 5 in. diameter & 1/2 in. height *The "P" within the part number indicates retail packaging

Slim 5" Dome Light - Warm White/Red - 10-30V This low-profile dome light has warm white and red LEDs. Features: 12/24V, 6W 390 Lumens 26 Color LED (red) Surface mount IP65 Touch switch Switch glows blue Specifications: Dimensions: 5 in. diameter & 1/2 in. height *The "P" within the part number indicates retail packaging

Wall Mount with Touch Dimming & Rotating Light Beautiful 3 watt wall fixtures put out the light! Built-in touch dimming switch also produces a soothing blue glow. The main LED produces a warming light that will really light your cabin or dim to read by. Simply touch the switch and hold until you reach desired lighting.

Wall Mount with Touch Dimming Beautiful 3W wall fixtures put out the light! Built-in touch dimming switch also produces a soothing blue glow. The main LED produces a warming light that will really light your cabin or dim to read by. Simply touch the switch and hold until you reach desired lighting.

LED Low Profile Task Light with Touch On/Off/Dimmer Switch - 304 Stainless Steel LED Low Profile Task Light with touch dimmer features 24 warm white LEDs @ 0.19A (145 lumens). Integral touch controlled on/dim/off operation, activated by pressing the center button. Memory function turns the light back on at the same brightness level as when it was turned off. Constructed of corrosion resistant, polished 304 stainless steel. Installs with two #6 FH fasteners (included). 12-28 VDC. IP65 rating. CE compliant. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4" LED Light Strip - White with Gasket - 12V This is a multi-use 4" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companion ways, or for step illumination. Features: 12VDC, 1.2W 6 EA 2835 LEDs Daylight white (4500K) IP67 *The "P" within the part number indicates retail packaging

4" LED Light Strip - Blue with Gasket - 12V This is a multi-use 4" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companionways, or for step illumination. Features: 12VDC, 1.2W 6 EA Blue 2835 LEDs IP67 *The "P" within the part number indicates retail packaging

LED Cabin/Reading Light with Touch Dimmer  LED Cabin/Reading Light with built-in, touch controlled on/dim/off switch. This light provides a direct beam reading light, as well as ambient light for the cabin. High quality aluminum construction with an adjustable light angle and a warm white, 3000K Cree bulb providing 270 lumens @ 2W. Works with 12V and 24V systems. Includes two #6 FH fasteners and Allen wrench. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Maxillume2 - High Power/Pedestal Mount Flood Light - Brushed Finish - White Dimming A blending of Lumitec's two most popular and powerful flood lights. The Maxillume2 offers all the benefits of its predecessors in a smaller, sleeker package, with higher output and a wider coverage area. Maxillume2 delivers the light output equivalent of a 200 to 300 watt halogen light. Designed and manufactured completely in the US, the light boasts a completely sealed marine grade housing and Lumitec's proprietary DeckSweep© technology. This radially asymmetric pattern puts light where you need it most, meaning more useable light and less wasted power. Now with dimming. Specifications: Voltage: 10 - 30V DC 12V DC Amps: 2.95A 24V DC Amps: 1.38A Correlated Color Temperature: 4500 Color Rendering Index: 70+ Rated Watts: 36 Lumens (White): 2100 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 8.30" (21.08cm) Height: 2.72" (6.91cm) Depth: 2.13" (5.41cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Caprera Cockpit Flood Light Lumitec's Caprera flood light is standard equipment on more top tier boats than any other LED flood light. Why? Quality, Performance, and Value. Utilizing Lumitec's proprietary light engine technology, it is a perfect replacement for 55W Halogens. Small in size (40% smaller than comparable lights) low power consumption (80% less current draw than a 55W Halogen) and completely sealed and IP 67 compliant. Housing is salt-spray tested to 3,000 hrs. And as with all high powered Lumitec lights, completely designed and manufactured in the USA. Specifications: Voltage: 10 - 30V DC 12V DC Amps: 900mA 24V DC Amps: 450mA Correlated Color Temperature: 6350 Color Rendering Index: 70 - 75 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Auxiliary Accent Lighting Pod - 1.5" x 3" - White SPECS Input Voltage: 10-30V DC White: (3-5W CREE LEDs) Wattage: 15W Raw Lumens: 1200/720 Beam Pattern: 120deg Flood CONSTRUCTION Housing Material: White Die-cast Aluminum Housing Lens Material: PC Mounting: Two Rubber Bases Included Hardware: Stainless 316 OPERATION Operating Temperature: -40degC to +60degC Current Consumption: .2 amps at 13.8 volts IP Rating: IP68 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.