|
Surface Mount Dome Light
(0300)
Bronze Base
Brass Body
Polished Chrome Plated
for 12, 24 and 32 Volts
Tech Info
O.D. Globe Base: 5"
O.D. Base: 6"
Depth: 2"
Wattage of Bulb: 17w
Max Wattage: 17w
|
55.76 |
|
|
Surface Mount Dome Light
(0300)
Bronze Base
Brass Body
Polished Chrome Plated
for 12, 24 and 32 Volts
Tech Info
O.D. Globe Base: 4"
O.D. Base: 5"
Depth: 1-7/8"
Wattage of Bulb: 11w
Max Wattage: 17w
|
47.62 |
|
|
Surface Mount Dome Light
(0300)
Bronze Base
Brass Body
Polished Chrome Plated
for 12, 24 and 32 Volts
Tech Info
O.D. Globe Base: 3"
O.D. Base: 3-3/4"
Depth: 1-1/2"
Wattage of Bulb: 7w
Max Wattage: 11w
|
43.44 |
|
|
Profile P1120 Tri-Light Surface Light - Red, Cool White & Blue - Chrome Finish
3 Colors with Only 2 Wires
Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture.
Small in size and simple to install, fixture mounts to most any marine surface - inside and out.
Rugged & Waterproof
With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*.
*IP67 rated. Not for use in submersible applications.
Features:
Surface Mount - Less than 3/4" thick
Use your existing wiring and switch
3 colors, 1 fixture
Simple 2 wire hookup
Color: Red, White & Blue
3.48" Round
0.72" Deep
LED
Marine Grade
Refit friendly
Power: 1.5W
Beam Angle: 120°
Typical Applications:
Hardtop
Arch
Cockpit
Courtesy
Pilot House
|
122.93 |
|
|
Perko 1" Thru-Hull Connection f/ use with Hose Bronze
Flange is machined to fit and grooved to retain bedding compound neck is
threaded to approximately 3/16 inch from flange.
Cast bronze, plain or chromed brass
Regular or short length versions
Regular Length- Fits maximum hull thickness up to 2 inches
Short Length- For thin hull sections up to 5/8 inches maximum
Technical Information Regular Length - Plain Bronze:
Hose Size Inches: 1
Mounting Hole Diameter Inches: 1-5/16"
Maximum Hull Thickness Inches: 1-3/4"
O.D. Flange Inches: 2-1/4"
Model Number: 0350006DPP
Ship Weight: 4.7/8.6 lbs.
Made in the USA
|
45.46 |
|
|
Perko 1-1/8" Thru-Hull Connection f/ use with Hose Bronze
Flange is machined to fit and grooved to retain bedding compound neck is threaded to approximately 3/16 inch from flange.
Cast bronze, plain or chromed brass
Regular or short length versons
Regular Length- Fits maximum hull thickness up to 2 inches
Short Length- For thin hull sections up to 5/8 inches maximum
Regular Length - Plain Bronze Technical Information:
Hose Size Inches: 1-1/8
Mounting Hole Diameter Inches: 1-5/16
Maximum Hull Thickness Inches: 1-3/4
O.D. Flange Inches: 2-1/4
Model Number: 035006ADPP
Ship Weight: 4.7/9.0 lbs.
Made in the USA
|
45.46 |
|
|
Profile P1120 Tri-Light Surface Light - Red, Warm White & Blue - Chrome Finish
3 Colors with Only 2 Wires
Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture.
Small in size and simple to install, fixture mounts to most any marine surface - inside and out.
Rugged & Waterproof
With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*.
*IP67 rated. Not for use in submersible applications.
Features:
Surface Mount - Less than 3/4" thick
Use your existing wiring and switch
3 colors, 1 fixture
Simple 2 wire hookup
Color: Red, White & Blue
3.48" Round
0.72" Deep
LED
Marine Grade
Refit friendly
Power: 1.5W
Beam Angle: 120°
Typical Applications:
Hardtop
Arch
Cockpit
Courtesy
Pilot House
|
122.93 |
|
|
Profile P1120 Tri-Light Surface Light - Red, Cool White & Blue - White Finish
3 Colors with Only 2 Wires
Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture.
Small in size and simple to install, fixture mounts to most any marine surface - inside and out.
Rugged & Waterproof
With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*.
*IP67 rated. Not for use in submersible applications.
Features:
Surface Mount - Less than 3/4" thick
Use your existing wiring and switch
3 colors, 1 fixture
Simple 2 wire hookup
Color: Red, White & Blue
3.48" Round
0.72" Deep
LED
Marine Grade
Refit friendly
Power: 1.5W
Beam Angle: 120°
Typical Applications:
Hardtop
Arch
Cockpit
Courtesy
Pilot House
|
122.93 |
|
|
Profile P1120 Tri-Light Surface Light - Red, Warm White & Blue - White Finish
3 Colors with Only 2 Wires
Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture.
Small in size and simple to install, fixture mounts to most any marine surface - inside and out.
Rugged & Waterproof
With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*.
*IP67 rated. Not for use in submersible applications.
Features:
Surface Mount - Less than 3/4" thick
Use your existing wiring and switch
3 colors, 1 fixture
Simple 2 wire hookup
Color: Red, White & Blue
3.48" Round
0.72" Deep
LED
Marine Grade
Refit friendly
Power: 1.5W
Beam Angle: 120°
Typical Applications:
Hardtop
Arch
Cockpit
Courtesy
Pilot House
|
122.93 |
|
|
Flush Mount Cup Holder w/Blue LED Light - Stainless Steel
LED Illuminated Flush Cup holder with Blue light
Cut-Out: 3-3/4"
O.D.: 4-1/4"
Uses 12V battery power
Comes with 6" wire leads
Includes Thick Mounting Gasket, pad & 3/8" drain tube
Fits cams, bottles & can coolers
|
28.43 |
|
|
Flush Mount Cup Holder w/Red LED Light - Stainless Steel
LED Illuminated Flush Cup holder with Red light
Cut-Out: 3-3/4"
O.D.: 4-1/4"
Uses 12V battery power
Comes with 6" wire leads
Includes Thick Mounting Gasket, pad & 3/8" drain tube
Fits cams, bottles & can coolers
|
28.43 |
|
|
Lumishore's SMX90-CS, adds a multi-color surface mount underwater light to Lumishore's extensive true color change product line. HICOB (High Intensity Chip On Board) light engine combines high power LEDs, advacnced thermal management and intelligent driver electronics into a low profile, corrosion proof, advanced polymer body. Additional individual lights can be added to the system, up to four controlled by one switch.
Some Exciting SMX90-CS Features Include:
-Four Preset Colors: Blue, White, Green and Cyan, all from a single light fixture
-Two strobe speeds (any color)
-Light output equivalent to a 75W underwater light
-Simple installation with no external driver
-Wide 90 degree beam provides "Swimming Pool" effect, reducing the number of lights required per installation
-Supplied with light(s) and a rocker switch
|
|
|
High-Output Surface Mount Underwater Light with Intelligent Monochromatic LED's - Blue, 45° Beam
The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant Blue light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important.
The F-SMR1-B3-45 is a superior underwater Blue LED luminaire with 45° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.
Clear Lens Technology
One of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!
Anti-Condensation Assembly Methodology
Condensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!
Technical Specifications:
Beam Angle - 45°
Input Voltage - 10VDC-30VDC
Power Consumption - 44W
Dimensions - 7.53" (W) x 7.68" (H) x 2.349" (D)
Weight - 2.71 lbs
Lens Material - Clear Quartz
Operating Temperature - -40 to 122°
|
958.87 |
|
|
High-Output Surface Mount Underwater Light with Intelligent Monochromatic LED's - Blue, 90° Beam
The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant Blue light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important.
The F-SMR1-B3-90 is a superior underwater Blue LED luminaire with 90° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.
Clear Lens Technology
One of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!
Anti-Condensation Assembly Methodology
Condensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!
Technical Specifications:
Beam Angle - 90°
Input Voltage - 10VDC-30VDC
Power Consumption - 44W
Dimensions - 7.53" (W) x 7.68" (H) x 2.349" (D)
Weight - 2.71 lbs
Lens Material - Clear Quartz
Operating Temperature - -40 to 122°
|
958.87 |
|
|
High-Output Surface Mount Underwater Light with Intelligent Monochromatic LED's - Green, 45° Beam
The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant Green light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important.
The F-SMR1-G3-45 is a superior underwater Green LED luminaire with 45° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.
Clear Lens Technology
One of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!
Anti-Condensation Assembly Methodology
Condensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!
Technical Specifications:
Beam Angle - 45°
Input Voltage - 10VDC-30VDC
Power Consumption - 44W
Dimensions - 7.53" (W) x 7.68" (H) x 2.349" (D)
Weight - 2.71 lbs
Lens Material - Clear Quartz
Operating Temperature - -40 to 122°
|
958.87 |
|