Caprera Cockpit Flood Light Lumitec's Caprera flood light is standard equipment on more top tier boats than any other LED flood light. Why? Quality, Performance, and Value. Utilizing Lumitec's proprietary light engine technology, it is a perfect replacement for 55W Halogens. Small in size (40% smaller than comparable lights) low power consumption (80% less current draw than a 55W Halogen) and completely sealed and IP 67 compliant. Housing is salt-spray tested to 3,000 hrs. And as with all high powered Lumitec lights, completely designed and manufactured in the USA. Specifications: Voltage: 10 - 30V DC 12V DC Amps: 900mA 24V DC Amps: 450mA Correlated Color Temperature: 6350 Color Rendering Index: 70 - 75 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Caprera2 - LED Flood Light - Black Finish - 2-Color White/Blue Dimming What do you do to improve the industry's best selling LED flood light? Add features, improve the beam pattern, and increase the output! Lumitec's Caprera2 flood lights do just that. New two-color technology provides amazing white output with elegant blue and night vision-preserving red. Our exclusive DeckSweep© technology puts the light where you need it most, providing for up to twice the useable light of competitors. Fully sealed and, as with all Lumitec products, proudly designed and manufactured in the USA. Specifications: Voltage: 10 - 30V DC 12V DC Amps: 1.3mA 24V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Lumens (White): 16 Rated Watts: 290 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 4.49" (11.41cm) Height: 1.65" (4.20cm) Depth: 2.83" (7.20cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Caprera3 Spreader Light - White Dimming - White Housing Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models. Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Barbados Courtesy Accent LED Light - Black with White Light Originally engineered for military application, our robust, high-output Barbados light is popular with marine and industrial customers alike because of its amazing performance and clean lines. Extremely durable composite housing. Smooth rounded profile to avoid snagging pant cuffs, lines, or clothing, Barbados is the ideal for lighting toe kicks on stairwells and deck steps. Specifications: Lumens (White): 45 Voltage: 10-16V DC 12V DC Amps: 45mA 24V DC Amps: N/A Rated Watts: 0.55 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to +131/55 Timed Toggled Protocol (TTP): No Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Height: 1.28" (3.25cm) Width: 1.81" (4.60cm) Depth: 0.52" (1.33cm) Diameter: N/A

Shadow-Caster LED Lighting Shadow Caster specializes in the design and manufacturing of a complete range of innovative LED lighting products and accessories. From marine lighting to patio systems, Shadow Caster offers a wide array of products to fit all of your lighting needs. Shadow Caster specializes in lights that are exceptionally bright, robust and efficient for both marine and terrestrial applications.

  D-SS Driving, Spot & Flood LED Lights   One of Rigid's most versatile, compact lighting solutions just got better with the D-SS, Dually Side Shooter LED cube. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications.   The D-SS cube incorporates the same powerful optics and legendary LED technology as Rigid's popular D-Series lights but with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with Rigid's advanced Flood, Spot, or Driving optics, so there's a D-SS lighting solution for nearly any application.   The D-SS LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only Rigid provides a broad, powerful lighting solution in such a compact package.       Ignite Surface Mount Diffused, Flood & Spot LED Lights   The Rigid Ignite™ is the smallest, most versatile light in Rigid Industries' product line! Measuring approximately 1.4” x 1.4” x 2”, this flexible light packs 1000 raw lumens using Spot, Flood or Diffused beam patterns; perfect for any application where short range light output is needed.   The Ignite also utilizes a Go-Pro® style mounting bracket which mates with an array of off the shelf Go-Pro mounts. Due to the wide range of mounting options, the Ignite's applications are almost limitless. The compact and lightweight housing makes the Ignite a great choice for auxiliary lighting on cars and trucks, motorcycles, UTVs, and even marine applications. Low current draw (less than 1 amp) and voltage requirements (6-28 volts) makes the Ignite adaptable to any application.   *Single light kits include one Ignite, mounting brackets, and related hardware. GoPro Mount Not Included.     Specials   Closeouts    Remanufactured    Rebates  

SurfStow develops stand up paddle board accessories that are affordable without sacrificing quality. SurfStow is passionate about getting as many people paddle boarding as possible by making it as easy as possible. Check out SurfStow!   NOCO is the leading manufacturer of battery technology solutions for many businesses and government agencies around the world. Check out Noco!   Aqualuma brings an extensive range of high quality LED lights that are the best in the business. Aqualuma's LED lighting products include solutions for LED Marine Lighting and much more. Check out Aqualuma LED Lighting!   Yukon Charlie's snowshoeing has become one of the fastest growing sports in the world today and it is easy to see why when considering the ease and enjoyment of this low impact winter sport. Check out Yukon Charlie's!     Other product lines Coming Soon to CLR Marine is WASPcam and BEP   Specials     Rebates     Close Outs     Remanufactured    

keywords: Golight, golight led lights, led lighting, led spotlight, led searchlight

Caprera3 Spreader Light - Spectrum - Black Housing Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models. Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Caprera3 Spreader Light - White/Blue Dimming - Black Housing Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models. Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Caprera3 Spreader Light - White/Red Dimming - Black Housing Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models. Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Caprera3 Spreader Light - White Non-Dimming - Black Housing Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models. Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Caprera3 Spreader Light - White Dimming - Black Housing Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models. Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

CapreraLT - LED Flood Light - White Finish - White Non-Dimming Since 2008 Lumitec's Capri and Caprera family have established the benchmark for quality, performance, and value in LED flood replacements for 55W halogens. With more than 1,000 integrating sphere tested lumens, the new CapriLT and CapreraLT build on that legacy and reaffirm market leadership. Developed, designed, and manufactured entirely at our R & D and production facilities in Florida, USA; the CapriLT and CapreraLT deliver exceptional reliability and class-leading performance. As with all Lumitec products, this light has been rigorously tested for shock and vibration, water ingress, impact, weatherability, electromagnetic radiation and susceptibility, and overall durability. In short, the CapriLT and CapreraLT deliver exceptional value in extreme environment LED flood lights. Compatible with most PWM LED dimmers. Specifications: Voltage: 10 - 30V DC 12V DC Amps: 1.3mA 24V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 12 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 4.94" (12.55cm) Height: 1.75" (4.45cm) Depth: 1.75" (4.45cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Caprera3 Spreader Light - White/Blue Dimming - White Housing Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models. Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood