|
4 LED Cube Light - Flood - 3"
Illuminate the night with the high-power, compact Heise 3 Inch LED Cube Light (E-HCL2). Integrated-epoxy encapsulated electronics, a virtually unbreakable polycarbonate lens and aluminum housing construction makes these cube lights ideal for any application. IP68 rated to withstand the worst environments. These bright cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs. The 90 degree flood beam pattern offers a wider angle of illumination. Colored accent caps are included to customize your light cube housing. It can get hit, shaken, banged up and wet - without fear of failure.
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W OSRAM LEDs)
Lumens: 960
Lux @ 10M: 32 Raw
Color Temperature: 6000K
Beam Pattern: 90° Flood
CONSTRUCTION
Housing Material: Die-Cast Aluminum Housing
Housing Color: Dark Gray
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: 40°C to +60°C
Current Consumption: .7 Amps @ 13.8 Volts
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
66.32 |
|
|
4 LED Cube Light - Flood - 3" - 2 Pack
Illuminate the night with the high-power, compact Heise 3 Inch LED Cube Light (E-HCL2). Integrated-epoxy encapsulated electronics, a virtually unbreakable polycarbonate lens and aluminum housing construction makes these cube lights ideal for any application. IP68 rated to withstand the worst environments. These bright cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs. The 90 degree flood beam pattern offers a wider angle of illumination. Colored accent caps are included to customize your light cube housing. It can get hit, shaken, banged up and wet - without fear of failure.
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W OSRAM LEDs)
Lumens: 960
Lux @ 10M: 32 Raw
Color Temperature: 6000K
Beam Pattern: 90° Flood
CONSTRUCTION
Housing Material: Die-Cast Aluminum Housing
Housing Color: Dark Gray
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: 40°C to +60°C
Current Consumption: .7 Amps @ 13.8 Volts
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
169.08 |
|
|
6 LED Cube Light - Flood Beam - 3" - 2 Pack
Heise HE-DLWH1 Dual Light Wiring Harness Included
Advanced thermal management- short circuit and open circuit protection and many other innovative features.
Surface mount and flush mount LED cubes give you tons of options for every application you need.
SPECS
Input Voltage: 10-30V DC
Power Consumption: 12W Each
Pair (4-3W CREE LED)
Lumen Flux: 900lm Each
Color Temperature: 6000K
Beam Pattern: 90deg Flood
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Hardware: Stainless Steel
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: -40degC to +60degC
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
183.74 |
|
|
6 LED Cube Light - Flood Beam - 3"
Advanced thermal management- short circuit and open circuit protection and many other innovative features
Surface mount and flush mount LED cubes give you tons of options for every application you need
SPECS
Input Voltage: 10-30V DC
Power Consumption: 18W
(6-3W CREE LED)
Lumen Flux: 1440lm
Color Temperature: 6000K
Beam Pattern: 90deg Flood
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Hardware: Stainless Steel
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: -40degC to +60degC
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
63.60 |
|
|
4 LED Cube Light w/Harness - Spot Beam- 3" - 2 Pack
Focus your field of view with the narrow but powerful 8 degree spot beam LED cube light. These 3 Inch 4 LED cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs for plenty of light. Replaceable color accent caps are included to customize the housing. Constructed of die-cast aluminum housing and a virtually unbreakable polycarbonate lens, these cube lights are IP68 rated and can withstand the worst environments. It can get hit, shaken, banged up and wet - without fear of failure.
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W OSRAM LEDs)
Raw Lumens: 960 Each
LUX @ 10M: 380
Color Temperature: 6000K
Beam Pattern: 8° Spot
CONSTRUCTION
Housing Material: Die-Cast Aluminum Housing
Housing Color: Dark Gray
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: 40°C to +60°C
Current Consumption: .7 Amps @ 13.8 Volts
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
178.51 |
|
|
4 LED Marine Cube Light - 3"
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W CREE LEDs)
Raw Lumens: 960
Color Temperature: 6000K
Beam Pattern: 90deg Flood
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: White Coating with UV Inhibitors
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: -40degC to +60degC
Current Consumption: .9amps at 13.8 volts
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
69.94 |
|
|
Blackout LED Cube Light - Flush Mount - 3"
SPECS
Input Voltage- 10-30V DC
Wattage- 12W
(4-3W CREE LED)
Raw Lumens- 960
LUX at 10M- 17
Color Temperature- 6000K
Beam Pattern- 90 degree Flood
CONSTRUCTION
Housing Material- Die-cast Aluminum Housing
Housing Color- Black
Lens Material- PC
Mounting Bracket- Flush Mount
Electronics- Integrated-Epoxy Encapsulated
Hardware- Stainless 316 and includes a gasket and cut out template
OPERATION
Operating Temperature- -40 degree C to +60 degree C
Current Consumption- .9 amps @ 13.8 volts
IP Rating- IP68
Protections- Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
80.69 |
|
|
3" 4 LED Cube Light - 2-Pack
Specifications:
Wattage: 13W
Lumens: 1080
Lux @ 10M: 411
Color Temperature: 6000K
Beam Pattern: Spot (8°)
Construction:
Housing Material: Die-Cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
Operation:
Operating Temperature: -40°C to +60°C
Current Consumption @ 13.8V: 0.9 A
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
239.04 |
|
|
3" 4 LED Cube Light
Specifications:
Wattage: 13W
Lumens: 1080
Lux @ 10M: 411
Color Temperature: 6000K
Beam Pattern: Spot (8°)
Construction:
Housing Material: Die-Cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
Operation:
Operating Temperature: -40°C to +60°C
Current Consumption @ 13.8V: 0.9 A
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
67.51 |
|
|
Lumishore's SMX90-CS, adds a multi-color surface mount underwater light to Lumishore's extensive true color change product line. HICOB (High Intensity Chip On Board) light engine combines high power LEDs, advacnced thermal management and intelligent driver electronics into a low profile, corrosion proof, advanced polymer body. Additional individual lights can be added to the system, up to four controlled by one switch.
Some Exciting SMX90-CS Features Include:
-Four Preset Colors: Blue, White, Green and Cyan, all from a single light fixture
-Two strobe speeds (any color)
-Light output equivalent to a 75W underwater light
-Simple installation with no external driver
-Wide 90 degree beam provides "Swimming Pool" effect, reducing the number of lights required per installation
-Supplied with light(s) and a rocker switch
|
|
|
Blackout Cube LED Light *2-Pack
Heise’s Blackout Series high output cube LED lights are small but powerful for better coverage at night. These next-generation lights have refined frames and cleaner lines for a sleek yet minimalistic look. The upgraded optics have changed from a direct to an indirect placement allowing more control of the location and pattern of the beam. This allows the lights to be tailored to the vehicle, its entire lighting system, and for the driver’s lighting coverage needs. Each set is rated IP67 and includes a dual light wiring harness (HE-DLWH1) for installation. Flush mount options are also available and sold individually (without harness).
Features:
2 Light Pack
Input Voltage: 12-24V Dc
Color Temperature: 5700K
Beam Pattern: 10o Spot
Housing Material: Die-Cast Aluminum
Color: Black
Lens Material: Polycarbonate
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
Operating Temperature: -40°F To +140°F
Protection: Reverse Polarity
Mounting: Side & Rear
Limited Lifetime Warranty
Specifications:
Size: 2.5”
4 LEDs
Wattage: 20W
Raw Lumens: 1,920lm
Lux at 10m: 635
Current Consumption @ 13.8V: 1.3A
IP Rating: IP67
*Values are for a single light
Vehicle Applicatins:
Universal
*WARNING: THIS LIGHTING PRODUCT IS SOLD FOR OFF-ROAD USE ONLY. This product should not be used on the road. Owners should keep the original factory bulbs so that they can replace them for use on public roads. Keep the box that the new bulbs came in to store the bulbs and be sure to handle them with care when removing and re-installing.
|
136.56 |
|
|
4 LED Marine Cube Light - Flush Mount - 3"
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W CREE LEDs)
Raw Lumens: 960
Color Temperature: 6000K
Beam Pattern: 90deg Flood
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: White Coating with UV Inhibitors
Lens Material: PC
Mounting Bracket: Flush Mount
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316 and includes a gasket and cut out template
OPERATION
Operating Temperature: -40degC to +60degC
Current Consumption: .9 amps at 13.8 volts per cube
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
64.56 |
|
|
2" LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0
The Cree flood light pod by Black Oak LED offers two levels of power to fill any need users might possibly have. This CREE LED floodlight delivers extreme IP69K durability to match such high-performance LEDs, allowing users to have confidence that their lights are going to perform when needed.
Cree and Osram are the biggest names on the LED market for a reason. The Cree flood lights put out more light and more power at such an extreme level. Users won't believe that so much light came from an LED so tiny. These mount virtually anywhere, and with all the hardware needed in the box, this CREE LED floodlights is ready to go.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Flood lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Fog light replacements
Bow light's on flats boats with trolling motor
Lower A-Pillar ditch lights on UTV's and trucks
Trailer lighting
Front bumper lights
Auxiliary motorcycle lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 1.4 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80"
In the Box:
2” pod light with flood optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual
|
116.10 |
|
|
2" Flush Mount LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0
Extremely versatile, this flush mount LED POD provides powerful light in a very compact size, allowing users to utilize it in countless scenarios. This Cree LED flush mount is great for ATVs, RZRs, Jeeps, trucks, work lights, and anything users can mount this powerful 2x2 LED light on. Black Oak's lab has tested and tested to ensure their LEDs are of the highest quality available. IP69K durability is a standard issue for everyone one of these guys, giving users hassle-free durability and protecting against over 30 types of harsh conditions. The flush mount LED truck lights put out an unimaginable amount of light, considering this series of lights has a compact appearance.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Flood lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Front bumper lighting for trucks and Jeeps
Reverse lights
Work lights
Headache rack lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 1.6 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height): 4-7/8" x 3-5/8"
In the Box:
2” flush mount pod light with flood optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual
|
135.00 |
|
|
2" Amber LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0
The amber LED fog light POD by Black Oak LED offers enough power to fill any need users might possibly have. Using True Amber 3w LEDS, this Amber POD is the highest performer in its class. The POD delivers extreme IP69K durability to match such high performing LEDs allowing users to have confidence that these 2 inch fog lights are going to perform when needed. These PODs come in the Food Optic, which throws light in a 45° pattern and is perfect for Fog Light applications.
Cree and Osram are the biggest names on the LED market for a reason. They put out more light and more power at such an extreme level. Users won't believe that so much light came from an LED so tiny. This light mounts virtually anywhere, and with all the hardware needed in the box, this 2-inch fog light is ready to go.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Flood lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Cut through fog and rain
Lower A-Pillar ditch lights on UTV's and trucks
Plow through snow with ease of vision
Race through dunes with better visibility
Front bumper lights
Technical Specifications:
Total Wattage: 12W
Amp. Draw: 1.1
LED Quantity: 4
Weight: 1.4 lbs.
Raw Lumens: 1,244
Warranty: Lifetime
IP Rating: IP69K
Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80"
In the Box:
2” amber pod light with flood optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual
|
98.10 |
|