|
6 LED Cube Light - Flood Beam - 3"
Advanced thermal management- short circuit and open circuit protection and many other innovative features
Surface mount and flush mount LED cubes give you tons of options for every application you need
SPECS
Input Voltage: 10-30V DC
Power Consumption: 18W
(6-3W CREE LED)
Lumen Flux: 1440lm
Color Temperature: 6000K
Beam Pattern: 90deg Flood
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Hardware: Stainless Steel
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: -40degC to +60degC
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
63.60 |
|
|
6 LED Cube Light - Flood Beam - 3" - 2 Pack
Heise HE-DLWH1 Dual Light Wiring Harness Included
Advanced thermal management- short circuit and open circuit protection and many other innovative features.
Surface mount and flush mount LED cubes give you tons of options for every application you need.
SPECS
Input Voltage: 10-30V DC
Power Consumption: 12W Each
Pair (4-3W CREE LED)
Lumen Flux: 900lm Each
Color Temperature: 6000K
Beam Pattern: 90deg Flood
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Hardware: Stainless Steel
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: -40degC to +60degC
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
183.74 |
|
|
4 LED Cube Light - Flood - 3" - 2 Pack
Illuminate the night with the high-power, compact Heise 3 Inch LED Cube Light (E-HCL2). Integrated-epoxy encapsulated electronics, a virtually unbreakable polycarbonate lens and aluminum housing construction makes these cube lights ideal for any application. IP68 rated to withstand the worst environments. These bright cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs. The 90 degree flood beam pattern offers a wider angle of illumination. Colored accent caps are included to customize your light cube housing. It can get hit, shaken, banged up and wet - without fear of failure.
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W OSRAM LEDs)
Lumens: 960
Lux @ 10M: 32 Raw
Color Temperature: 6000K
Beam Pattern: 90° Flood
CONSTRUCTION
Housing Material: Die-Cast Aluminum Housing
Housing Color: Dark Gray
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: 40°C to +60°C
Current Consumption: .7 Amps @ 13.8 Volts
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
169.08 |
|
|
4 LED Cube Light - Flood - 3"
Illuminate the night with the high-power, compact Heise 3 Inch LED Cube Light (E-HCL2). Integrated-epoxy encapsulated electronics, a virtually unbreakable polycarbonate lens and aluminum housing construction makes these cube lights ideal for any application. IP68 rated to withstand the worst environments. These bright cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs. The 90 degree flood beam pattern offers a wider angle of illumination. Colored accent caps are included to customize your light cube housing. It can get hit, shaken, banged up and wet - without fear of failure.
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W OSRAM LEDs)
Lumens: 960
Lux @ 10M: 32 Raw
Color Temperature: 6000K
Beam Pattern: 90° Flood
CONSTRUCTION
Housing Material: Die-Cast Aluminum Housing
Housing Color: Dark Gray
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: 40°C to +60°C
Current Consumption: .7 Amps @ 13.8 Volts
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
66.32 |
|
|
Blackout LED Cube Light - Flush Mount - 3"
SPECS
Input Voltage- 10-30V DC
Wattage- 12W
(4-3W CREE LED)
Raw Lumens- 960
LUX at 10M- 17
Color Temperature- 6000K
Beam Pattern- 90 degree Flood
CONSTRUCTION
Housing Material- Die-cast Aluminum Housing
Housing Color- Black
Lens Material- PC
Mounting Bracket- Flush Mount
Electronics- Integrated-Epoxy Encapsulated
Hardware- Stainless 316 and includes a gasket and cut out template
OPERATION
Operating Temperature- -40 degree C to +60 degree C
Current Consumption- .9 amps @ 13.8 volts
IP Rating- IP68
Protections- Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
80.69 |
|
|
4 LED Cube Light w/Harness - Spot Beam- 3" - 2 Pack
Focus your field of view with the narrow but powerful 8 degree spot beam LED cube light. These 3 Inch 4 LED cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs for plenty of light. Replaceable color accent caps are included to customize the housing. Constructed of die-cast aluminum housing and a virtually unbreakable polycarbonate lens, these cube lights are IP68 rated and can withstand the worst environments. It can get hit, shaken, banged up and wet - without fear of failure.
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W OSRAM LEDs)
Raw Lumens: 960 Each
LUX @ 10M: 380
Color Temperature: 6000K
Beam Pattern: 8° Spot
CONSTRUCTION
Housing Material: Die-Cast Aluminum Housing
Housing Color: Dark Gray
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: 40°C to +60°C
Current Consumption: .7 Amps @ 13.8 Volts
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
178.51 |
|
|
Many boaters find exploring underwater an adventure into a whole new world. Whether you are on a night dive or set to explore murky waters, choose the best lighting for safety. For a night dive, consider the number of lumens and the angle of a dive light. In an article by www.scubadiving.com,any light with an average beam angle between 12 degrees to 75 degrees and a lumen output of 200 or greater should work fine for any recreational diving. The beam should be far wider than most torches can produce to prevent a bright spot from appearing. A 90-degree beam should be sufficient for most wide-angle video cameras.
For many safety reasons, having lights underwater on a boat is a must. The lights cast a glow with a lantern-type beam to make your location more visible. Many captains mount lights under the swim step to improve safety when stepping on or off a boat.
Nighttime fishing has become extremely popular. An easy and effective way to attract fish at night is with appropriate lighting. The fish are not attracted to the light itself — they are attracted to the zooplankton that gathers around it.
Color matters when it comes to underwater lighting. The most effective colors are Green light and White light to attract fish to boats, docks, and piers. These colors are brighter and will attract fish from a greater distance. Blue light is less bright and is typically used more for ambient lighting.
In a future article, we will cover deck lights. For safety regarding boating at night, an on-deck spotlight is an essential piece of equipment. Many skippers have been saved from an impending disaster because their searchlight beam lit up an unlit dock, break-wall, or buoy. The spotlight also helps you spot a person or object that has fallen into the water. It can aid in safety when needed to signal other boats.
When shopping for a spotlight, decide if you want one permanently installed or a handheld that can charge from a cigarette lighter receptacle. You can also purchase a battery-operated handheld light.
Golight Stryker Searchlight 12V w/Wired Dash Control w/20' Wire Harness – White
One of the preferred searchlights among skippers is the Golight Stryker Searchlight. It comes with a 20' wire harness and has a wireless dash-mount remote option. For broad sweeps with the beam, the searchlight has a 370x Rotation x 135-degree Tilt, with 200,000 Candela Beam Intensity. It is both UV Ray and Saltwater Resistant.
ACR RCL-300 Remote Controlled Searchlight - 12V/24V
The top-of-the-line ACR RCL-300 Remote Controlled Searchlight – 12V/24V has feature upon feature with its versatility and ease with touch control. It includes fingertip remote control Point Pad™; up to three remote Point Pad™ units may be installed on the system; surface/flush mount options included. The exclusive XRCiZ™ feature rotates and moves the light assembly every 30 days from activation to keep all bearing surfaces free of corrosion and all electrical contacts functional.
Underwater Lighting
Among the more popular LED hull-mounted lights is the OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Lighting - Midnight Blue.
XFM models, or Xchangeable Flush Mounts, are exchangeable without hauling should service be needed. The light can be retrofitted into most existing underwater lighting hole cut-outs, yielding immediate benefits of no startup power surge, low heat, minimal maintenance, and improved light output. It offers 7,000-fixture lumen brightness with the 2010XFM HD Gen2 model.
For additional information and pricing on the lighting listed here, go to https://www.clrmarine.com/462m4/lighting.html.
Fair Winds, Smooth Sailing.
____________________________________________________________________________________________________
To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/.
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com
|
|
|
Lumishore's SMX90-CS, adds a multi-color surface mount underwater light to Lumishore's extensive true color change product line. HICOB (High Intensity Chip On Board) light engine combines high power LEDs, advacnced thermal management and intelligent driver electronics into a low profile, corrosion proof, advanced polymer body. Additional individual lights can be added to the system, up to four controlled by one switch.
Some Exciting SMX90-CS Features Include:
-Four Preset Colors: Blue, White, Green and Cyan, all from a single light fixture
-Two strobe speeds (any color)
-Light output equivalent to a 75W underwater light
-Simple installation with no external driver
-Wide 90 degree beam provides "Swimming Pool" effect, reducing the number of lights required per installation
-Supplied with light(s) and a rocker switch
|
|
|
6 LED Marine Cube Light - Flush Mount - 3"
SPECS
Input Voltage: 10-30V DC
Wattage: 18W (6-3W CREE LEDs)
Raw Lumens: 1440
Color Temperature: 6000K
Beam Pattern: 90deg Flood
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: White Coating with UV Inhibitors
Lens Material: PC
Mounting Bracket: Flush Mount
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316 and includes a gasket and cut out template
OPERATION
Operating Temperature: -40degC to +60degC
Current Consumption: 1.2 amps at
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
82.80 |
|
|
SR-Q Series PRO Flood Surface Mount - Black
The SR-Q PRO is a sleek, low-profile lighting option that packs more lighting output than ever before, thanks to recent improvements to the advanced LEDs inside. The SR-Q Professional Race Output now emits up to 102% more raw lumens, depending on optics. An excellent choice for any application where space is limited, the SR-Q PRO makes auxiliary lighting professional-grade. Other recent updates to the SR-Q PRO include updated RIGID branding and blacked-out circuit boards for a more refined look. This light has a single row of LEDs and a flood beam pattern.
Features:
Flush mount
Multiple mounting capabilities exist, such as the suction cup mount and angled flush mounts, just to name a few
50,000+ hour lifespan
9-36 V DC
Durable UV-resistant powder coat
High-grade aluminum alloy
Integrated thermal management system
Impact-resistant polycarbonate lens
Over/Under voltage protection
RFI/EMI protection
Reverse polarity protection
RoHS compliant
IP68 compliant - dust/water ingress
Operating temp -40 deg F to +145 deg F
SAE J575 compliant: shock/vibration
Available in white and black housing
Pressure-equalizing vent
Waterproof connector (exclusions apply)
Limited lifetime warranty
Off-road use only
Specifications:
Size: 2 x 5 inches
Weight: 0.74 lbs.
Optics: Flood
Watts: 32
Amp Draw: 2.29
Raw Lumens: 3168
Lux @ 10M: 69.24
Beam Distance @1Lux: 83.2
Beam Distance @.25Lux: 166.4
Horizontal Beam Angle: 50.8
Product Comes With:
Mounting hardware
Stainless steel, u-shape bracket (excludes FM)
Solid black light cover (excludes FM)
Harness with switch
Deutsch connector
|
165.00 |
|
|
9006 LED Headlight Kit - Single Beam
HEISE LED replacement headlights are designed to replace weaker, factory bulbs with brighter, low current consuming LED bulbs. These headlight kits are extremely bright, providing the additional light needed on dark nights.
Each kit has a pair of 25 watt LED bulbs. The voltage and current monitoring circuits are inside the compact radial heatsink housing and protected from the elements. Installation is easy, even in tight locations!
Heise headlights come in 21 different model sizes to fit an array of headlight applications and are the perfect upgrade for drivers wanting more out of their headlights.
Features:
6000 Lumens
25 Watts per bulb
Compact radial heatsink for better heat dissipation – less depth of space and easy installs
Voltage and current monitoring circuits are inside the compact radial heatsink housing and protected from the elements
6500K color spectrum with 3000K (golden yellow) and 8000K (light blue tint) films
Rotatable bulb can adjust the beam pattern for the vehicle
IP67 Rated
Not for use on public roads
*Sold as a Pair
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
74.81 |
|
|
3" 4 LED Cube Light - 2-Pack
Specifications:
Wattage: 13W
Lumens: 1080
Lux @ 10M: 411
Color Temperature: 6000K
Beam Pattern: Spot (8°)
Construction:
Housing Material: Die-Cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
Operation:
Operating Temperature: -40°C to +60°C
Current Consumption @ 13.8V: 0.9 A
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
239.04 |
|
|
3" 4 LED Cube Light
Specifications:
Wattage: 13W
Lumens: 1080
Lux @ 10M: 411
Color Temperature: 6000K
Beam Pattern: Spot (8°)
Construction:
Housing Material: Die-Cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
Operation:
Operating Temperature: -40°C to +60°C
Current Consumption @ 13.8V: 0.9 A
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
67.51 |
|
|
2" LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0
The Cree flood light pod by Black Oak LED offers two levels of power to fill any need users might possibly have. This CREE LED floodlight delivers extreme IP69K durability to match such high-performance LEDs, allowing users to have confidence that their lights are going to perform when needed.
Cree and Osram are the biggest names on the LED market for a reason. The Cree flood lights put out more light and more power at such an extreme level. Users won't believe that so much light came from an LED so tiny. These mount virtually anywhere, and with all the hardware needed in the box, this CREE LED floodlights is ready to go.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Flood lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Fog light replacements
Bow light's on flats boats with trolling motor
Lower A-Pillar ditch lights on UTV's and trucks
Trailer lighting
Front bumper lights
Auxiliary motorcycle lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 1.4 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80"
In the Box:
2” pod light with flood optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual
|
116.10 |
|
|
2" Amber LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0
The amber LED fog light POD by Black Oak LED offers enough power to fill any need users might possibly have. Using True Amber 3w LEDS, this Amber POD is the highest performer in its class. The POD delivers extreme IP69K durability to match such high performing LEDs allowing users to have confidence that these 2 inch fog lights are going to perform when needed. These PODs come in the Food Optic, which throws light in a 45° pattern and is perfect for Fog Light applications.
Cree and Osram are the biggest names on the LED market for a reason. They put out more light and more power at such an extreme level. Users won't believe that so much light came from an LED so tiny. This light mounts virtually anywhere, and with all the hardware needed in the box, this 2-inch fog light is ready to go.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Flood lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Cut through fog and rain
Lower A-Pillar ditch lights on UTV's and trucks
Plow through snow with ease of vision
Race through dunes with better visibility
Front bumper lights
Technical Specifications:
Total Wattage: 12W
Amp. Draw: 1.1
LED Quantity: 4
Weight: 1.4 lbs.
Raw Lumens: 1,244
Warranty: Lifetime
IP Rating: IP69K
Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80"
In the Box:
2” amber pod light with flood optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual
|
98.10 |
|