|
A3 Downlight - Surface/Flush Mount - Stainless Steel
This Scandvik A3 Surface Mounted LED Down Light is a single-color light. This A3 Surface Mount Series light features a snap-over bezel in Polished 316 stainless steel and a surface mount collar in a matching color. The A3 mounts securely overhead using two screws. Single-color lights have a two-wire (positive/negative) connection and work with a common switch (on/off).
Features:
316 stainless steel trim
6 x 0.5-watt warm white LED
242 Lumens
2.2 Watt
12 Volt
IP67
Applications:
A3s are a good choice for general overhead lighting on smaller boats or as undercabinet lighting for any size vessel
Other applications include hard tops, arches, walkway overhangs, shower stalls, or any area that lacks the depth to recess mount a fixture
*The "P" within the part number indicates retail packaging
|
23.09 |
|
|
Engine Room Light - Surface/Flush Mount
This super-bright, vibration-resistant LED light meets the expectations of next-generation vessels, refits, or upgrades. This multi-voltage fixture can be powered by your DC battery system, an AC generator/shore power, or both. If connected to both, the PC board automatically switches to DC power when AC power is lost.
Features:
Includes a trim ring for surface mount installation and stainless steel mounting hardware
Meets Requirements and Standards for SAE J1171 USCG, ABYC & NMMA
IP67
Flush or Surface Mount
Daylight white (6000K)
168 super-bright 2835 LEDs
12/24 VDC and/or 110/220 VAC
Specifications:
Lumens: 3400 (similar to 2 x T8 fluorescents)
Beam Angle: 120°
Watts: 42
*The "P" within the part number indicates retail packaging
|
221.75 |
|
|
B3 Downlight Surface Mount - Cool White - SS Trim - IP67 - 12/24V
Scandvik’s low profile B3 (3/8 in. height) surface-mounted, single-color downlight is manufactured to be simple and budget-friendly. The polished stainless steel snap-over trim ring is a nice upgrade from the inferior chrome plastic bezels of the past. The fixture is popular as a T-Top light because it looks like a flush-mount light without the hassle of cutting holes.
Features:
The light color is cool white
95 Lumens
10-30 VDC
1 Watt
IP67
*The "P" within the part number indicates retail packaging
|
17.82 |
|
|
B3 Downlight Surface Mount - Blue - SS Trim - IP67 - 12/24V
Scandvik’s low profile B3 (3/8 in. height) surface-mounted, single-color downlight is manufactured to be simple and budget-friendly. The polished stainless steel snap-over trim ring is a nice upgrade from the inferior chrome plastic bezels of the past. The fixture is popular as a T-Top light because it looks like a flush-mount light without the hassle of cutting holes.
Features:
The light color is blue
13 Lumens
10-30 VDC
1 Watt
IP67
*The "P" within the part number indicates retail packaging
|
17.82 |
|
|
Flush Mount Spreader Light - 10-30V - White
This is a flush-mount spreader light with white trim.
Features:
12/24 V, 12W
High-Quality Composition Frame
Polycarbonate Lens
UV Resistant
Hidden Mounting Screws
Cool white LED color (5,500 - 6,300K)
Five 3 Watt Samsung 3535 LEDs
1,000 Lumens
Equivalent to 120-watt halogen bulbs
0.8 Amp draw at 12 volts
IP68
Specifications:
Dimensions (W x H x D): 6 x 2-1/2 H x 1-3/4 in.
Cutout (W x H): 4-1/2 x 1-1/2 in.
LED Lifetime: 50,000 Hours
LED Beam Angle: 110°
The temperature of the LED: Less than 158° with a 77° ambient temperature
*The "P" within the part number indicates retail packaging
|
61.97 |
|
|
Sure-Grip Flush Mount Mounting Base - Fits 2" Flat Surfaces
This Attwood Sure-Grip Flush Mount can fit 2" flat surfaces and is constructed out of extruded aluminum.
Specifications:
Base: Flush base
Fits: 2” flat surfaces
|
5.00 |
|
|
LL-C 5" Flush Cover f/Globemaster, Super Yacht & SuperSport Flush Mount Compasses - White
Protective cover for Globemaster, Super Yacht and SuperSport flush mount compasses (must have low level lighting).
For: FB-500, SF-500, SS-5000, SS-5000W, SY-500LL, and SY-500LLC
Approx. Shipping Weight: 1lb
|
41.15 |
|
|
D-Series PRO - Flush Mount - Diffused - Pair - Black
One of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.
Features:
Optics: Hybrid - Diffused
LED Color: White
Finish Color: Black
Mount Type: Flush
Shipping Dimensions: 6" × 8" × 6"
Product Weight: 2.46lb
Sold As: Pair
Hybrid Optics
60° Diffused Pattern
50,000+ Hr LED Lifespan
Instant On / Off - No Warm Up
RoHS Compliant
Over / Under Voltage Protection
Cast Aluminum Housing
Durable Polycarbonate Lens
Integrated Thermal Management
GORE® Pressure Equalizing Vent
Designed, Engineered, & Assembled in the USA
Sealed Deutsch Connector
Specifications:
Watts: 30
Amp Draw: 2.14
LED's: 4
Raw Lumens: 3168
Lux @ 10m: 20.6
Beam Distance: 45.4 m
Peak Beam Intensity: 2060 cd
|
200.84 |
|
|
SR-Q Series PRO Spot Diffused LED - Flush Mount - Pair - Black
The SR-Q PRO is a sleek low profile lighting option that packs more lighting output than ever before thanks to recent improvements to the advanced LEDs inside. The SR-Q Professional Race Output now emits up to 102% more raw lumens, depending on optic. An excellent choice for any application where space is limited, the SR-Q PRO makes auxiliary lighting professional grade.
A single row of LEDs and is available in multiple beam patterns, including Spot, Flood, Driving, Hyperspot, and Diffused. Other recent updates to the SR-Q PRO include updated RIGID branding and blacked out circuit boards for a more refined look. Both surface and flush mount options are available and there are multiple mounting capabilities, such as the Suction Cup Mount and Angled Flush Mounts, just to name a few.
The SR-Q PRO is also a perfect back-up light and is available as a Back-Up Light Kit with a 25' harness and a three-position switch for ease of wiring and usage.
Features:
Optics: Spot - Diffused
LED Color: White
Finish Color: Black
Mount Type: Flush
Hybrid Optics
60° Diffused Pattern
50,000+ Hr LED Lifespan
Instant On / Off - No Warm Up
RoHS Compliant
Over / Under Voltage Protection
Cast Aluminum Housing
Durable Polycarbonate Lens
Integrated Thermal Management
GORE® Pressure Equalizing Vent
∗ Sold as a Pair
|
262.50 |
|
|
Radiance Scene - RGBW - Flush Mount - Pair
Radiance+ RBGW flush-mounted pod scene light provides a clean flush-mount option for the already epic light. The Radiance+ RGBW Pod Scene Light is built with the same high-grade aluminum alloy housing as our D-Series lights. The RGBW backlights provide the ability to toggle between eight available backlight options with the flip of a switch: red, green, blue, light blue, purple, amber, white, or demo mode.
Utilizing the latest in LED technology and incorporating a thermally optimized heat sink, the Radiance+ RGBW Pod Scene Light provides up to 100 degrees of horizontal spread for maximum coverage. Scene lighting provides a clear, bright light with minimal amp draw.
The Radiance+ RGBW Pod Scene Light is feature-packed, with a black exposed printed circuit board, forward-projecting optics that optimize the light output, and an integrated mounting plate that allows installers to mount the light flush with the chosen surface. The RIGID Radiance+ RGBW Pod Scene delivers a stylish approach to scene lighting.
Features:
8 backlighting options (red, green, blue, light blue, purple, amber, white, or demo mode)
Backlighting can be independently controlled using switch logic
Black exposed printed circuit board
10-year warranty
9-15 V DC
Black powder coat finish
Pressure equalizing vent
IP68 compliant - dust and water ingress
High-grade aluminum alloy housing and heat sink
Over/under voltage protection
high-impact polycarbonate lens
Mounting brackets are included
RFI/EMI protection
Rohs compliant
Off-road use only
Product Comes with:
Two flush-mount scene Radiance+ RGBW light pods
Mounting brackets
Media pack
Specifications:
Size (inch): 3"
Weight (Lbs): 1.30
Optics: Scene light
Watts: 24
Amp Draw: 1.7
Raw Lumens: 2970
Lux at 10m: 22
Beam Distance at 1Lux: 50
Beam Distance at .25 Lux: 93
Peak Beam Intensity (cd): 2166
Horizontal Beam Angle: 100
|
225.00 |
|
|
Flush Mount Kit for echo™ 200, 500c & 550c
Looking for a sleeker installation for your echo 200, 500c or 550c? A flush mount kit allows you to easily position your device against most flat surfaces in your boat.
The kit includes a flush mount gasket, necessary hardware and instructions.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.89 |
|
|
Flush Mount Kit for echoMAP™ 4Xdv Series
Make mounting your echoMAP™ sonar device quickly and easier than ever when you use the Garmin echoMAP™ Sonar 4Xdv Flush Mount Kit. Perfect for any boat, this Flush Mount Kit allows you to easily position your echoMAP™ device in the most ideal place on your power or sail boat.
The Garmin echoMAP™ Sonar 4Xdv Flush Mount Kit works on most flat surfaces to ensure a successful and reliable installation. For the easiest way to prepare your echoMAP™ system for use, you'll love the detailed mounting instructions and the easy to install style offered.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
17.99 |
|
|
PP4409 PowerPod Pre-Cut f/Garmin STRIKER™ 7sv/7dv 7" CHIRP Fishfinder (Requires Flush Mount Kit Garmin Part)
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
All PowerPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|
|
PP4409 PowerPod Pre-Cut for Garmin STRIKER™ 7" 7sv/7dv (Requires Flush Mount Kit Garmin Part) - Carbon Black
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
All PowerPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|
|
PP4410 PowerPod Pre-Cut for Garmin STRIKER™ 5dv (Requires Flush Mount Kit Garmin Part)
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
All PowerPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|