|
8" Rod Floats
Using the YakGear Rod Floats, the rod will stay on top of the water instead of sinking to the bottom if it falls out of a pair of hands or the boat, saving money and getting users back to casting. Whether users are fishing with children, or you just want some peace of mind, this is a must-have product for all ages. It installs in seconds; just slip onto a fishing pole, attach the Velcro straps, and that's it!
This package comes with 3 colors to choose from: yellow, orange, and blue. Each float is roughly 8 inches long.
Features:
Includes 3 colors: yellow, orange, and blue.
Keep the rod and reel on top of the water in case the rod happens to slip
Roughly 8 inches long
Simple installation
Fits all fishing poles
1-year warranty
|
8.80 |
|
|
Portable Side Mount with Dual Lock 8 Rod Holder
The great side-mount Rod Holder in a portable version. Easy to install using a 3M Dual-lock technology. Simply clean and place the mounting squares where you want and you're done. The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion. Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods. Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations. Holds up to 8 Rods.
|
62.03 |
|
|
Side Mount 8 Rod Holder
Side Mount Rod Savers are for vertical or horizontal applications. They are designed to hold rods and reels in a crisscross manner to enable more rods to be stored in a smaller space. Holds up to 6-8 Rods.
|
38.59 |
|
|
HX Rod Holder Flag Pole - 54"
Features:
Gimbal butt makes flying in any rod holder a breeze
Made of anodized aluminum
Easy to store
Fits standard 1-5/8” rod holders
54” Rod Holder Flag Pole
Holds 36" x 60" sandbar flag or 20”x24” dive flag
|
60.31 |
|
|
XD Rod Holder Flag Pole - 72"
Features:
Gimbal butt makes flying in any rod holder a breeze
Made of anodized aluminum
Easy to store
Fits a standard 1-5/8” rod holder
|
122.27 |
|
|
Groco 1/8 Square Key 1/8 Square Key
|
3.51 |
|
|
Groco 037-075-8 Lip Shaft Seal, 3/8"
|
6.14 |
|
|
|
12.29 |
|
|
|
15.80 |
|
|
Groco 8-R Gasket Set Of 2
|
16.67 |
|
|
|
161.40 |
|
|
March 1A-MD 3/8 Mag Drive Pump
March Pump's industrial 1A-MD-3/8 is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.5 Feet (or around 2PSI). The 1A-MD-3/8 pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, and Stainless Steel. When submerged, Epoxy, Noryl, and the SJT Cord are also in contact with the solution. The inlet connection is 3/8 inch smooth, and the outlet is 3/8 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.005 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 160 Celsius in open air, or 87 Fahrenheit or 71 Celsius if submerged. The March 1A-MD-3/8 centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals.
Perfect for Applications Including
Applications for the 1A-MD-3/8 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
Great for Chemicals Including
The 1A-MD-3/8 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The 1A-MD-3/8 may have been modified to handle these chemicals.
Type: Centrifugal Mag Drive
Inlet: 3/8"OD
Outlet: 3/8"OD
Wet End: Polypropylene (Front Housing, Rear Housing, Impeller), Buna N (O-Ring), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft)
Uses: Submersible or Open Air
When submerged, the following is also in contact with the solution, Epoxy, Noryl, SJT Cord
|
319.80 |
|
|
Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-3/8 Part # 0115-0064-0300 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-3/8 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
2.3 GPM
8.7 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/8"OD
Outlet
3/8"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0300
|
227.18 |
|
|
Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-3/8 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-3/8 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
2.3 GPM
8.7 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/8"OD
Outlet
3/8"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
|
205.73 |
|
|
Shurflo 8-566-00 1/2 Memory Ring
|
0.19 |
|