|
AMT 5390-95, Immersion Coolant Oil Pump 23gpm 115volt
INTERCHANGEABLE IMMERSION & SUCTION COOLANT OIL PUMPS
1/4 HP Totally Enclosed Motors (TEFC)
115/230 volts, 3.0/1.5amps
Single or Three Phase Motors
Stainless Steel or Composite Semi-open Impeller Options
Immersion and Suction Types
Cast Iron Construction
Handles Viscosity up to 500 SSU
Standard Replacement for Machine Tool Industry
1/2 inch FNPT Ports
Delivers up to 23 GPM and 26 PSI
Replacement For The Following Standard Machine Tool Industry Pumps
Fuji: VKP-063A
Old Fuji: VKN-061A
Mitsubishi: NQ100J
Toshiba: OPF-100M
Hitachi: CPD-100M
Yasukawa: VFPC-100
Graymills: IMV-25
Gusher: VBV-14
AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.
|
502.04 |
|
|
AMT 5391-95, Immersion Coolant Oil Pump 23gpm 230/460volt
INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS
Cast Iron Construction
1/4 HP 230/460V 3 Phase Immersion Type
Shaft Seal Material: Sealless Design
Speed (RPM): 3450
Type: IMM
Voltage: 230/460
Fluid Port: 0.5"
HP:1/4
Impeller Material: Stainless Steel
GPM: 23
Replacement for Standard Machine Tool Industry Pumps
Fuji: VKP-063A
Old Fuji: VKN-061A
Mitsubishi: NQ100J
Toshiba: OPF-100M
Hitachi: CPD-100M
Yasukawa: VFPC-100
Graymills: IMV-25
AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.
AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.
|
487.69 |
|
|
Amt 5351-95, Cast Iron Coolant Pump 230/460volt
INTERCHANGEABLE IMMERSION & SUCTION COOLANT OIL PUMPS
1/4 HP Totally Enclosed Motor (TEFC)
Three Phase Motor
230/460 volts 0.8/0.4 amps
Stainless Steel or Composite Semi-open Impeller Options
Immersion and Suction Types
Cast Iron Construction
Handles Viscosity up to 500 SSU
Standard Replacement for Machine Tool Industry
Delivers up to 56 GPM and 26 PSI
3/4" FNPTOutlet
AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.
AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.
|
507.94 |
|
|
AMT 5381-95, Immersion Coolant Pump Cast Iron 10gpm
INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS
1/8 HP Totally Enclosed Motor (TEFC)
Three Phase Motor
230/460 volts, 0.3/0.19 amps
Stainless Steel or Composite Semi-open Impeller Options
Immersion and Suction Types
Cast Iron Construction
Handles Viscosity up to 500 SSU
Standard Replacement for Machine Tool Industry
Delivers up to 10 GPM
3/8 inch outlet diameter
Able to pump liquid down to 2 inches
Replacement for to following Standard Machine Tool Industry Pumps
Fuji: VKP-053A
Old Fuji: VKN-051A
Mitsubishi: NQ-60J
Toshiba: OPF-60M
Hitachi: CPD-060M
Yasukawa: VFPC-061DIF
Graymills: IMV-08
Gusher: VBV-18
|
250.97 |
|
|
AMT Pump 5411-95 Coolant Pump Cast Iron Imm
Cast Iron Immersion Type Coolant Pump
Oil Coolant Pumps
Fluid Port: 1
HP: 1
Impeller Material: Stainless Steel
Phase: 3
1" Cast Iron 1 HP 230/460V 3 Phase Immersion Type
Shaft Seal Material: Sealless Design
Speed (RPM): 3450
Type: IMM
Voltage: 230/460
|
933.12 |
|
|
AMT 4230-97, Coolant Recirculating Pump 1 Phase, 115V, 3/8" NPT Female
3/8" BRONZE COOLANT RECIRCULATING PUMPS
Cast Bronze Construction
No Bottom Bearing!!!
Brass Column and Impeller Shaft
Bronze Self-cleaning Open Impeller
3/8" NPT Discharge Port
Maximum Flow 8 GPM
Maximum Head 10 ft.
Available with 115V AC Single Phase or 230V AC Three Phase Motors,1590 RPM
1/25 HP Totally Enclosed Fan Cooled (TEFC) Motor
Delivers up to 8 GPM and 4 PSI
The AMT Bronze Coolant/Recirculating pump has been manufactured for a wide variety of Industrial/Commercial Coolant and Recirculating applications. The absence of a bottom bearing makes the unit ideal for handling erosive liquids. A 36" 3-conductor power cord is included.
AMT Bronze Coolant/Recirculating pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast, 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
|
386.98 |
|
|
AMT Pump 5760-95 1Hp 2"Npt 115V CI-SS
Submersible Shredder Sewage Pump 5760-95, 130 GPM, 1.0 HP, Carbide Tipped
Cast Iron construction with stainless steel motor housing
1.0 HP, 14 Amps, 115 volts, continuous duty, single phase electric motor
Can handle solids up to 1 inch
Triplex seal system
2 inch output port with a discharge rate of 7800 gallons per hour
The AMT by Gorman-Rupp 5760-95 is an industrial grade shredder sewage pump that is designed to handle sludge and dirty water applications. Features an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging when pumping sludge type waste. Liquid content still must be above 85% to keep from damaging the pump and possibly void the warranty.
|
1244.98 |
|
|
Amt 3693-013-09 Impeller For Am 3693-95/97
|
41.92 |
|
|
Amt 4891-010-09 Impeller For Am 4891-95/97
|
84.75 |
|
|
Amt 4901-010-09 Impeller For Am 4901-95/97
|
148.95 |
|
|
Amt 5764-95 Sub Shredder Pump 3" Npt
SUBMERSIBLE SHREDDER SEWAGE PUMP
Cast Iron with Stainless Steel Motor Housing
Carbide-Tipped Shredder Impellers
Spiral Shredder Mechanism Plate Surface Hardened for Enhanced Cutting Ability
Silicon Carbide Lower Seal
3" NPT Port Sizes
Max. Temperature 104° F
3 HP
230 Volt
AMT Submersible Shredder Sewage pumps feature an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge type waste. Applications include sewage pumping stations, septic tanks, sewage treatment plants, dirty water drainage, flood and emergency. Also ideal for grinder type solids reduction application. Motors are rated continuous duty and single phase models have thermal overload protection.
AMT Submersible Shredder Sewage Pumps are reliable, cost effective and low maintenance.
|
1824.94 |
|
|
AMT 3201-96, Laundry Tray Pump 1/4 HP 115V
GENERAL PURPOSE LAUNDRY TRAY PUMP
Cast Aluminum Construction
Buna-N Mechanical Seal and O-Ring
1-1/4" NPT Suction and Discharge Port
Self-cleaning, Semi-open Impeller
Continuous Duty Motor 1725 RPM, 1/4 HP 115VAC Single Phase Open Drip Proof (ODP) 48Z Frame
The AMT Laundry Tray pump is a single stage, multi-vane open impeller unit. It is designed as a laundry tray pump but can be used for most gravity fed general service pumping applications. The open impeller design makes it particularly adaptable to dirty as well as clean liquids and is inherently resistant to clogging.
The AMT Laundry Tray pump is readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
|
282.56 |
|
|
AMT 3682-95 Straight Centrifugal Pedestal Pump
Mechanical Seal: Buna-N
Maximum Temperature: 180° F
3/4 in. NPT Suction Ports
1/2 in. NPT Discharge Ports
Maximum Working Pressure: 75 PSI
Self-cleaning Impeller on General Service Models
Maximum Flow 35 GPM
Maximum Head 148 Ft.
Epoxy Coated Pedestal Drive and Discharge Port Rotates in 90° Increments on High Head Models
All pumps have Cast Iron Casing with Stainless Steel Impeller
AMT Straight Centrifugal Pedestal pumps are designed for continuous-duty OEM, Industrial/Commercial and processing applications including circulation, chemical processing, liquid transfer, heating and cooling. The high head models are ideal for sprinkler systems and pressure boosting.
Pull-from-the-rear design permits easy servicing without disturbing any piping. Pedestals feature CNC machined shafts with sealed ball bearings. AMT Straight Centrifugal Pedestal pumps are reliable, cost effective and low maintenance. For use with nonflammable liquids compatible with pump component materials.
|
380.84 |
|
|
AMT Pump 4821-95 Rotary Hand Pump Cast Iron
Heavy-duty Cast Iron body with Buna-N seal
5 GPM @70 RPM (11 oz./stroke)
Carbon vanes
0.75" suction x 1" discharge ports
0.75-Inch NPT steel discharge spout assembly (included)
1-Inch NPT x 40-Inch steel suction tube assembly (included)
2-Inch Cast Iron Bung adapter
Maximum Temperature 160F
Self-Priming
Capable of handling compatible fluids with a maximum of 5,000 SSU viscosity at a minimum of 70 degrees F liquid temperature (roughly equivalent to SAE 40 motor oil)
Liquids must be free of debris and solids for proper operation
|
83.37 |
|
|
AMT Pump 4822-95 Rotary Hand Pump
AMT Rotary Drum Pump
1" Suction & 3/4" Discharge
Buna-N Shaft Seal
Includes: Bung Adapter & Suction Tube Included
Material: Cast Iron
|
133.38 |
|