|
Micropump GA-T23.J9FS.A Pump Head A Mount
The GA Series high-performance pumps provide precise and pulseless flows. Featuring Micropump's suction-shoe design, GA Series pumps self-compensate for wear, ensuring near zero slip and a longer pump life. Pumps are available in a wide range of materials and configurations.
Feature:
Small Size
Smooth, Pulseless Delivery
Chemically Resistant
Easy to Service
Proven Reliability
Advanced Pump Technology
Wide Range of Options
OEM Configurations
Enhanced Efficiency
Pump Series: GA Series
Ports/Fittings: 1/8-27 (F) NPT Side Ports
Min Speed (RPM): 500
Max Speed (RPM): 5500
Max Pressure (psi): 300
Min Temperature (°C): -46
Max Temperature (°C): 177
Max Diff. Pressure (psi): 75
Displacement (ml/rev): 0.092
Design: Standard Design
Gear Set: 0.125/2/40 (0.092 ml/rev)
Gear Material: PEEK (hex drive)
Static Seals: PTFE
Base Materials: 316SS
Drive Mount: MP Housing
Bypass: No
Driven: Ferrite
Driving Magnet: Not Included
High System Pressure: No
Bushings: None
Shafts: 316SS
Gear TrimNone
Model: GA-T23.J9FS.A
|
1147.03 |
|
|
Engine Cooling Pump for Kohler 4-6 Cylinder Diesel - 4-6.5kW Gas - 12.5 kW Gas
Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.
For Engine Models:
4-6 Cylinder Diesel
4-6.5 kW Gas
12.5 kW Gas
Replaces Pump:
Kohler - 267373, 246489, 344089 (Impeller Kohler 229826)
Sherwood - G907P (Impeller Sherwood 9959K)
|
241.37 |
|
|
Engine Cooling Pump for Kohler - 5-7 Diesel kW
Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.
For Engine Models:
Kohler 5-7 KW Diesel
Replaces Pump:
Kohler - 28487 359341 GM28487 (Impeller Kohler 359978)
Sherwood - G8001 (Impeller Sherwood 8000K)
|
196.96 |
|
|
Engine Cooling Pump for Kohler - 5EKD, 4EFKD, 7.5EKD, 6EFKD, 10EKD, & 8EFKD
Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.
For Engine Models:
5EKD, 4EFKD, 7.5EKD, 6EFKD, 10EKD, and 8EFKD
Replaces Pump:
Kohler - GM63535 (Impeller Kohler 359978)
Sherwood - G8005 (Impeller Sherwood 8000K)
|
209.82 |
|
|
Raritan PHII PUMP Phii Pump Assy Complete
|
468.75 |
|
|
Engine Cooling Pump for Kohler
Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.
For Engine Models:
N/A
Replaces Pump:
Kohler - GM46936, GM344371 (Impeller Kohler 229826)
Sherwood - G910P (Impeller Sherwood 9959K)
|
241.37 |
|
|
Mate USA M162-004-13 Water Pump with Nitrile flexible impeller
UP1-J
GPM: 7.4
Ports: 3/4" Barb
Volt: 24V
Fuse 4 amp
Gpm: 7.4
Psi: 15
Fresh water: Yes
Salt water: Yes
Greywater: Yes
This Mate USA 7.4 GPM Self-priming electric pump with flexible rubber impeller. Is fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.
Note: image is showing a 12volt pump, This pumps is 24v.
|
228.15 |
|
|
Bosworth 2800 Guzzler Aluminum Pump
Bosworth Diaphragm Pump End Only Guzzler Aluminum, 13.4GPM, 2” Smooth Ports, 56C Motor Flange, Buna Flapper Valves and Diaphragm
2800 Requires a 1/2HP Motor this is the pump only
|
1881.30 |
|
|
Hypro 4101C-A, Roller Pump 7Gpm Ci
Features:
Max flow: 7 gpm
Max pressure: 150 psi
Max speed: 2600 rpm
Port sizes: 3/4" NPT
Pump shaft rotation: CW
5/8" solid stainless steel shaft ( 1/2" Hollow Shaft also available)
Pumps are available in reverse rotation
|
231.75 |
|
|
Groco Sp-99-A Vane Pump Rotor, 8 Slots
|
47.39 |
|
|
Hypro 4101Xl-A, Roller Pump 7Gpm 150Psi
Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids.
The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps. Ready for use with Roundup®.
Features:
Max flow: 7 gpm
Max pressure: 150 psi
Max speed: 2600 rpm
Port sizes: 3/4" NPT
Pump shaft rotation: CW
5/8" solid stainless steel shaft ( 1/2" Hollow Shaft also available)
|
592.44 |
|
|
Tuthill 000LE-A-7 Pump 3/8 Port
Type: Internal Gear
Maximum Flow Rate: 0.5 gpm
Max Pressure: 300 psi
Inlet/Outlet Port Sizes: 3/8 in NPT
Pump Body Material: Cast Iron
Wetted Materials: Steel, Carbon, Bronze, P/M Steel, PPS
O-Ring Material: Viton, Neoprene, EPR
Seal: Viton Mechanical Seal
Configuration Assembly: Tang Shaft
|
593.75 |
|
|
Tuthill 00LEV-A-CC-7 Tang Pump W/Rv
Pump Body: Cast Iron
Relief Valve: Relief valve is factory set to 55 PSI for adjustment between 55-120 PSI.
Shaft Seal: Mechanical Seal Viton
Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 1.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
597.13 |
|
|
Tuthill 1LEV-C-A-88462 Pump 3.2Gpm 1/2Hp 1725Rpm 1P
|
684.25 |
|
|
Tuthill 2LEV-C-A-7 Pump 6.2Gpm Short Shaft
Type: Internal Gear
Maximum Flow Rate: 6.2 gpm
Max Pressure: 300 psi
Inlet/Outlet Port Sizes: 1/2 in NPT
Pump Body Material: Cast Iron
Wetted Materials: Steel, Carbon, Bronze, P/M Steel, Carbon
O-Ring Material: Viton, Neoprene, EPR
Seal: Viton Mechanical Seal
|
792.00 |
|