Hypro 4101C-A, Roller Pump 7Gpm Ci   Features: Max flow: 7 gpm Max pressure: 150 psi Max speed: 2600 rpm Port sizes: 3/4" NPT  Pump shaft rotation: CW 5/8" solid stainless steel shaft ( 1/2" Hollow Shaft also available) Pumps are available in reverse rotation

Groco Sp-99-A Vane Pump Rotor, 8 Slots  

Micropump GA-T23.J9FS.A Pump Head A Mount The GA Series high-performance pumps provide precise and pulseless flows. Featuring Micropump's suction-shoe design, GA Series pumps self-compensate for wear, ensuring near zero slip and a longer pump life. Pumps are available in a wide range of materials and configurations. Feature: Small Size Smooth, Pulseless Delivery Chemically Resistant Easy to Service Proven Reliability Advanced Pump Technology Wide Range of Options OEM Configurations Enhanced Efficiency Pump Series: GA Series Ports/Fittings: 1/8-27 (F) NPT Side Ports Min Speed (RPM): 500 Max Speed (RPM): 5500 Max Pressure (psi): 300 Min Temperature (°C): -46 Max Temperature (°C): 177 Max Diff. Pressure (psi): 75 Displacement (ml/rev): 0.092 Design: Standard Design Gear Set: 0.125/2/40 (0.092 ml/rev) Gear Material: PEEK (hex drive) Static Seals: PTFE Base Materials: 316SS Drive Mount: MP Housing Bypass: No Driven: Ferrite Driving Magnet: Not Included High System Pressure: No Bushings: None Shafts: 316SS Gear TrimNone Model: GA-T23.J9FS.A

Tuthill 1LEV-C-A-88462 Pump 3.2Gpm 1/2Hp 1725Rpm 1P

Tuthill 1LEV-C-A-88513-7 Pump And Motor

Tuthill 1LEV-C-A-88520-7 Pump W/3Ph 1/2Hp Motor

Tuthill 1LEV-C-A-88494-7 Pump And Motor

Hypro 4101Xl-A, Roller Pump 7Gpm 150Psi Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids.   The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps. Ready for use with Roundup®.   Features: Max flow: 7 gpm Max pressure: 150 psi Max speed: 2600 rpm Port sizes: 3/4" NPT  Pump shaft rotation: CW 5/8" solid stainless steel shaft ( 1/2" Hollow Shaft also available)

Micropump GJ-N21.PF1S.A-B1 Pump Head A Mount Micropump 81978 GJ-N21.PF1S.A-B1 Mag-Drive Gear Pump Head Requires A-Mount compatible Drive 81978 constructed of Base Material 316SS Gear Material PPS (carbon fiber/ptfe) Shaft Material 316SS

Micropump GJ-N23.PF1S.A-B1 Pump Head A Mount Micropump 81528 GJ-N23.PF1S.A-B1 Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81528 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS INLET/OUTLET CONNECTION TYPE: FNPT INLET SIZE: 1/8 in OUTLET SIZE: 1/8 in MAX PRESSURE: 300 psi (21 bar) MATERIAL - GASKET: PTFE MATERIAL - GEAR: PPS (carbon fiber/ptfe) DISPLACEMENT: Positive Displacement

Tuthill 00LE-A-C-7 Pump 1Gpm Short Shaft Pump Body: Cast Iron Shaft Seal: Mechanical Seal Viton Port Size:Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 1.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 000LE-A-7 Pump 3/8 Port Type: Internal Gear Maximum Flow Rate: 0.5 gpm Max Pressure: 300 psi Inlet/Outlet Port Sizes: 3/8 in NPT Pump Body Material: Cast Iron Wetted Materials: Steel, Carbon, Bronze, P/M Steel, PPS O-Ring Material: Viton, Neoprene, EPR Seal: Viton Mechanical Seal Configuration Assembly: Tang Shaft

Tuthill 1LE-A-7 Pump 3.2Gpm Short Shaft Cast Iron Rotary Gear Pump Pump End Only Cast Iron Construction Tang Shaft Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 2LEV-C-A-7 Pump 6.2Gpm Short Shaft Type: Internal Gear Maximum Flow Rate: 6.2 gpm Max Pressure: 300 psi Inlet/Outlet Port Sizes: 1/2 in NPT Pump Body Material: Cast Iron Wetted Materials: Steel, Carbon, Bronze, P/M Steel, Carbon O-Ring Material: Viton, Neoprene, EPR Seal: Viton Mechanical Seal

Little Giant Submersible Pump Little Giant 1-A Submersible Pump Small submersible oil-filled pump with epoxy coated cast aluminum housing. For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated. This compact 170 GPH pump features a 1/4" MNPT discharge, 7' shut-off head capability, and screened inlet. This pump is not recommended for aquariums, swimming pools and fuel oil transfer.   Features: 170 GPH @ 1 ft. Horespwoer 1/200, 115 Volt, 1.1 Amps Operates submersed. 6' cord Epoxy-coated aluminum housing Bottom inlet has snap-off screen for easy cleaning. 1/4" MNPT outlet, with 90° elbow accessory, accepts 1/2" I.D. tubing