|
Apelo Underwater Lighting Brilliance By Hella Marine
Lets You Do It All Select between incredibly intense white or vibrant blue for amazing illumination experiences. Take complete control and choose any color you wish with Apelo RGB.
Apelo Redefines Entertaining Lighting
Optical Intelligence delivers more visible light spread across the transom. Apelo competes with rivals offering higher lumen ratings, while using less energy to achieve equal brightness.
Turn Up The Party, Select The Mood, Switch On The Fish Magnets. Apelo Underwater Lighting Brilliance Lets You Do It All. Apelo shines with more lux in wide horizontal and narrow vertical illumination where it counts. For the lumens, Apelo has superior brightness using less energy. Thermal polymer is employed, an inert housing material 100% resistant to corrosion and suitable for any hull material. The optical nylon lens is incredibly tough and will not embrittle or discolor in harsh UV.
*Keep in mind, while some other manufacturers are no longer making lights for recreation marine, Hella Marine has a direct replacement for almost every product.
Specials Closeouts Remanufactured Rebates
|
|
|
NaviLED PRO Starboard Navigation Lamp - White - 3NM
This NaviLED Starboard lamp covers vessel requirements over 50m.
Hella Marine takes navigation lighting very seriously. Often a grudge fitment to comply with the rules, this light is essential when navigating at night.
All Hella marine products are designed with components that suppress possible interference, both emissions and susceptibility to emissions, to the limits prescribed in international standards. This prevents interference with radio, communication, navigation, and other electrical equipment on board.
Hella marine lamps are rated IP67 and completely sealed. UV from the sun, corrosive salt air, and constant vibration: these lamps are impervious to the marine environment.
With ultra-low power consumption from the highly efficient LED light source, this lamp also provides exacting light intensity across a wide range of voltage inputs, from 9V DC to 32V DC.
Made in New Zealand and fully supported by Hella Marine's 5-year warranty for peace of mind.
Specifications:
Lamp Type: Starboard Navigation
Dimensions (W x H): 3.43 x 3.54 inches (87mm x 90mm)
Lamp Color: White
Material Description: Hi-impact-resistant acrylic lens
Minimum Visible Distance: 3 nautical miles (powerboats only)
Cable: Pre-wired with 2.5m of tinned marine cable
Operating Voltage: Multivolt 9-33V DC for 12/24V applications
Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -500 volts
Power Consumption: <2W (0.17A@12V / 0.09A@ 24V DC)
Degree of Protection: IP67 (completely sealed)
Weight: 250g (including cable)
Approvals: IMO Col Reg 72, RINA, USCG, ABYC C-5, RCM, Maritime NZ
|
141.26 |
|
|
2 NM NaviLED PRO Starboard Navigation Lamp - Black
Hella Marine NaviLED products are the leaders in the marine navigation signal lighting industry, having established an enviable reputation for superior light control and reliability.
NaviLED PRO Port, Starboard, Masthead, and Stern lamps cover vessel requirements up to 50m.
Hella Marine takes navigation lighting very seriously. Often a grudge fitment to comply with the rules, these lights are extremely important when navigating at night.
All Hella marine products are designed with components that suppress possible interference, both emission as well as susceptibility to emissions, to the limits prescribed in international standards. This prevents possible interference with radio, communication, navigation, and other electrical equipment on board.
Hella marine lamps are rated at IP67 and completely sealed. UV from the sun, corrosive salt air, and constant vibration: these lamps are impervious to the marine environment.
Ultra-low power consumption from the highly efficient LED light source, these lamps also provide exacting light intensity across a wide range of voltage inputs from 9V DC to 32V DC.
Made in New Zealand and fully supported by Hella Marine's 5-year warranty, for complete peace of mind
NOTE: NaviLED PRO is now compliant with ABYC C-5. Visit the ABYC Compliance page to see the complete range of products with this certification.
Features:
Material Description: High-impact and UV-resistant acrylic
Minimum Visible Distance: 2 Nautical Miles (Yachts and Powerboats)
Cable: 2.5m of tinned marine cable
Operating Voltage: Multivolt™ 9–33V DC for 12 / 24V DC applications
Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -500 volts
Power Consumption: <2W (0.17A@12V / 0.09A@ 24V DC)
Degree of Protection: IP67 - Completely Sealed
Weight: 50g (including cable)
Compliance: IMO Col Reg 72, RINA, USCG, ABYC C-5, RCM, Maritime NZ
Specifications:
2 NM Visibility
IMO COL REG 72
USCG
RINA
ABYC C-5 Compliant
Maritime NZ
LED
12/24V Multivolt
IP67 Completely Sealed
UV Resistant
5-Year Warranty
|
132.16 |
|
|
2 NM NaviLED PRO Starboard Navigation Lamp - White
Hella Marine NaviLED products are the leaders in the marine navigation signal lighting industry, having established an enviable reputation for superior light control and reliability.
NaviLED PRO Port, Starboard, Masthead, and Stern lamps cover vessel requirements up to 50m.
Hella Marine takes navigation lighting very seriously. Often a grudge fitment to comply with the rules, these lights are extremely important when navigating at night.
All Hella marine products are designed with components that suppress possible interference, both emission as well as susceptibility to emissions, to the limits prescribed in international standards. This prevents possible interference with radio, communication, navigation, and other electrical equipment on board.
Hella marine lamps are rated at IP67 and completely sealed. UV from the sun, corrosive salt air, and constant vibration: these lamps are impervious to the marine environment.
Ultra-low power consumption from the highly efficient LED light source, these lamps also provide exacting light intensity across a wide range of voltage inputs from 9V DC to 32V DC.
Made in New Zealand and fully supported by Hella Marine's 5-year warranty, for complete peace of mind
NOTE: NaviLED PRO is now compliant with ABYC C-5. Visit the ABYC Compliance page to see the complete range of products with this certification.
Features:
Material Description: High-impact and UV-resistant acrylic
Minimum Visible Distance: 2 Nautical Miles (Yachts and Powerboats)
Cable: 2.5m of tinned marine cable
Operating Voltage: Multivolt™ 9–33V DC for 12 / 24V DC applications
Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -500 volts
Power Consumption: <2W (0.17A@12V / 0.09A@ 24V DC)
Degree of Protection: IP67 - Completely Sealed
Weight: 50g (including cable)
Compliance: IMO Col Reg 72, RINA, USCG, ABYC C-5, RCM, Maritime NZ
Specifications:
2 NM Visibility
IMO COL REG 72
USCG
RINA
ABYC C-5 Compliant
Maritime NZ
LED
12/24V Multivolt
IP67 Completely Sealed
UV Resistant
5-Year Warranty
|
132.16 |
|
|
2nm All Round White Fold Down Pole Navigation Lamp - 8" - White Base
Hella marine NaviLED 360 lamps feature single LED efficiency, advanced MultivoltTM electronics and precision optics for reliable and highly visible all round lighting
Taking the popularity of the restyled NaviLED 360 Compact All Round / Anchor lamp Hella marine has expanded the product family with pole mounted versions with fixed, fold down and plug-in base options.
Using only high performance materials the NaviLED 360 Compact series is long term durable in demanding marine environments.
A power consumption of less than 1W power offers exceptional power efficiency for a 2 NM all round anchor lamp.
Each lamp is completely sealed (IP67) and manufactured using Swiss Made Grilamid with unsurpassed properties. Long term stability against UV degradation coupled with high impact and chemical resistant meaning these lamps will not yellow, become embrittled or corrode.
Internationally approved the NaviLED 360 series meets the requirements of COLREG, USCG, ABYC-16, RCD and WHEELMARK. MultivoltTM circuitry provides constant illumination and circuit protection from 9-33V DC.
Hella marine LED navigation lamps are expertly designed and precision manufactured in New Zealand and backed a 5-year warranty for complete peace of mind.
Features:
LED
12/24V Multivolt™
IP67 Completely Sealed
UV Resistant
2nm Visibility
5-Year Warranty
|
116.96 |
|
|
DuraLED 36 Interior/Exterior Lamp - White/White Clamshell
Hella Marine DuraLed Heavy Duty LED Lamps provide powerful white light and a safe, energy-efficient, and reliable alternative to incandescent and fluorescent lighting. Purposely designed for engine rooms, storage lockers, and many heavy-duty applications where reliability must not be compromised.
Advanced HELLA Marine lens and optic engineering ensure an ultra-wide spread of light without glare or harsh light points. The range offers three peak intensity levels, all with a very wide spread of light. Product reliability is second to none, proven worldwide in thousands of highly demanding applications. Each lamp is completely sealed, impact resistant, and shock resistant, ensuring an ultra-long service life. Each lamp is pre-wired with 2.5 meters of twin core marine cable for time-saving and completely sealed electrical connections.
Hella Marine Multivolt circuitry provides constant illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations. Spike protection, reverse polarity protection, and over-voltage protection are all built-in benefits of the sophisticated electronics inside each lamp. DuraLed lamps carry ISO ignition protection approvals for safe and certified installations when lamps are located near flammable gas sources such as machinery spaces, tender garages, and fuel storage areas. DuraLed lamps are surface mounted and feature a unique installation system where the fastening load is taken up by a heavy-duty nylon bush to eliminate possible stress on the lamp housing.
|
153.42 |
|
|
Apelo A3 White/Blue Underwater Light - Bronze - White Lens
Supercharged with 6000-lumen light output, the Apelo A3 is the ultimate in the Hella Marine Apelo Underwater Light range.
The A3 model has an improved formula with double the light output, maximizing the vibrant blue and intense white. This version sports the edge lighting Apelo is known for.
Optical intelligence is at the heart of Hella Marine lighting, and Apelo is no exception. Intelligent optics spread light across the water without losing light to the depths, projecting wide across the transom. With the addition of nickel-silver to the extremely corrosion-resistant housing, the Apelo A3 is perfect for permanently submerged installations on larger boats and ships.
Features:
Suitable for fiberglass, timber, steel, and composite hulls
Only mount on aluminum-hulled vessels with a suitable isolation spacer
Made in New Zealand and backed by Hella Marine’s 5-year warranty (Apelo Underwater Lights are built to last)
Specifications:
Mounting: Transom/surface
Voltage: Multivolt™ 12 / 24V DC Nominal
Max. Power Consumption: Blue/white 70W / 5.9A @ 12V, 2.9A @ 24V & Edge Light <5W / 0.37A @12V, 0.2A @ 24V
Max. Light Output: 6000 lumens (white)
Color Temperature: 5000K (white)
Beam: 90° x 24°
Protection: Spike protected to +500 volts; reverse polarity protected to -700 volts; IP68 / IP69: Suitable for submersion in operation and high-pressure water jet cleaning; High-temperature thermal cutout for out-of-water
Cable Length: 2.5m / 8.2ft, tinned marine cable
Ideal Depth: 100–500mm
Ideal Width: 600–1200mm
Lens Material: Grilamid® (premium grade, UV stable, impact resistant nylon)
Base Material: Marine grade bronze
Compliance: CE, UKCA, EN55015 / CISPR 15, IEC60533, IEC61547, ICES-005, RCM
|
508.86 |
|
|
NaviLED 360 Compact All Round Lamp - 2nm - 12" Fold Down Base - White
Hella marine NaviLED® 360 lamps feature single LED efficiency, advanced Multivolt™ electronics and precision optics for reliable and highly visible all round lighting
Using only high performance materials the NaviLED 360 Compact series is long term durable in demanding marine environments.
A power consumption of less than 1W power offers exceptional power efficiency for a 2 NM all round anchor lamp.
Each lamp is completely sealed (IP67) and manufactured using Swiss Made Grilamid with unsurpassed properties. Long term stability against UV degradation coupled with high impact and chemical resistant meaning these lamps will not yellow, become embrittled or corrode.
Internationally approved the NaviLED 360 series meets the requirements of COLREG, USCG, ABYC-16, RCD and WHEELMARK. Multivolt™ circuitry provides constant illumination and circuit protection from 9-33V DC.
Hella marine LED navigation lamps are expertly designed and precision manufactured in New Zealand and backed a 5-year warranty for complete peace of mind.
Specifications:
Material Description: UV resistant, enhanced impact acrylic lens. Anodized aluminium lamp base and pole
Minimum Visible Distance: 2 Nautical Miles (Yachts and Powerboats)
Cable: Pre-wired with 1.5M of twin core marine cable
Operating Voltage: Multivolt 9-33V DC
Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -500 volts
Power Consumption: < 1.0W
Degree of Protection: IP 67 - Completely Sealed
Weight: 250g (including cable)
Approvals: IMO Col Reg 72, Wheelmark, USCG, ABYC A-16, RCD, Maritime NZ
|
120.00 |
|
|
EuroLED 130 Touch - White/Red - Black Shroud
Advanced LED lamps with touch-sensitive switching. Power saving and ultra-durable. Designed and manufactured in New Zealand, EuroLEDTouch lamps provide red/white light using the latest completely sealed touch-sensitive technology.
Lighting control is beautifully simple. Touch the color pad for red or blue light, the white pad for white light. On the dual-color versions, hold your finger on the pad for more than two seconds and the lamp will cycle through four dimming levels. Release your finger on the light level required.
Dual-color EuroLED Touch lamps can also be remotely operated from multiple points with ‘off the shelf’ ON/OFF/ON momentary switches. Holding one of the external switches for two seconds will synchronize the lamps to the same dimming level. Light levels are ‘remembered’ by the lamp's circuitry, even when a vessel’s batteries are turned off. The lamp will always turn on at the color intensity previously set, regardless of power interruption.
EuroLED Touch current draw is 4W on white (0.33A @ 12V) and less than 1.5W on red or blue (less than 0.125A @ 12V) to provide significant power savings. Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety, particularly with powerful lamps such as the EuroLED series. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source. Advanced Hella marine lens technology provides a safe, smooth, and uniform light pattern, without glare or discomfort.
The durability of EuroLED Touch lamps is outstanding. Each lamp is completely waterproof, impact, and shock-resistant, for ultra-long service life. MultivoltTM circuitry provides consistent illumination across a range of input voltages from 9-33 DC, even under severe voltage fluctuations.
Features:
All HELLA Marine LED Lamps feature advanced materials and state of the art technology for reliability, efficiency, and safety at sea
Completely sealed housing and cable entry with robust bush mount
Mounting bosses eliminate torque load on housing while heavy-duty shroud clips over lamp body
Dual-color EuroLED Touch lamps feature dimming and remote momentary switch control
Touch the color pad for on or off, hold finger on the pad to cycle through dimming levels
LED
12/24V Multivolt
IP67 Completely Sealed
UV Resistant
5-Year Warranty
Black Shroud
White/Red
|
153.42 |
|
|
NaviLED Deck Mount Port & Starboard Pair - 2nm - Clear Lens/White Housing
Compact deck mount LED navigation lamps.
Attractive, power saving and ultra reliable.
Ultra low current draw
NaviLED® lamps use less than 10% of the power required to run a bulb navigation lamp of the same visible distance. Port and Starboard lamps consume less than 2W combined!
No bulbs, No maintenance, Ultra long service life
Hella marine LED technology has no filaments to break making NaviLED® lamps extremely shock and vibration proof for proven reliability and safety in demanding conditions.
Multivolt™ 8-28V DC
Advanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages.
Safe and highly visible
Hella marine optics deliver 100% correct light output and enhanced visibility compared to bulb navigation lamps.
Fully sealed for life. IP 67 certified
Each NaviLED® lamp is a completely sealed unit. High impact housings ensure durability from waves and impact.
Specifications:
Material Description: UV resistant, enhanced impact resistant acrylic lens High impact shroud
Minimum Visible Distance: 2 Nautical Miles (Yachts and Powerboats)
Cable: Pre-wired with 500mm of twin core marine cable
Operating Voltage: Multivolt 8-28V DC
Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -700 volts
Power Consumption: Port and Starboard less than 2W combined
Degree of Protection: IP 67 - Completely Sealed
Weight: 75g (including cable)
Approvals: IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ
|
173.16 |
|
|
LED Deck Light - White Housing - 1200 Lumens
Hella Marine introduces the low profile and powerful FMS LED deck lamps. These surface-mount scene lamps are purpose-designed to integrate discreetly in tight spaces and exterior recesses yet throw a huge amount of light wherever they are installed. With a protrusion of only 38 mm, the FMS-Lamps are sleek and unobtrusive during the day but make themselves very well-known at night!
Two light intensities are offered: the FMS1200 with 1200 lumens; and the FMS2500 with an even more powerful 2500 lumens. This light is a 1200 lumens option, but both lamps offer even close-range illumination directly underneath the lamp. The light is projected downwards at a fixed angle of 45 degrees, with no brackets to adjust.
Hella marine LED technology is the answer for energy-efficient, completely sealed, shock and vibration-resistant lighting. Advanced electronics provide consistent illumination and circuit protection across a range of inputs from 9–32VDC for a long service life.
Features:
Deck floodlight for surface mounting
Low profile design
Close-range illumination
1200 lumens
Energy-efficient and durable LED technology
Specifications:
Housing Material: Die-cast aluminum, CoroSafe coating
Lens: Widespread diffuser
Mounting: Surface mount
Lumen: 1200 lumens
Color Temperature: 6500K (White)
Cable: Pre-wired with 500mm cable
Operating Voltage: Multivolt™ 9-32V DC, Nominal 12/24V DC
Power Consumption: 14W
Degree of Protection: IP 6K8 (Protection against dust and prolonged water immersion)
IP 6K9K (Protection against dust and high-pressure/steam jet cleaning)
Weight: 600g (including cable)
Approvals: ECE-R10, RCM, ADR/ GGVSEB
|
75.95 |
|
|
LED Deck Light - White Housing - 2500 Lumens
Hella Marine introduces the low profile and powerful FMS LED deck lamps. These surface-mount scene lamps are purpose-designed to integrate discreetly in tight spaces and exterior recesses yet throw a huge amount of light wherever they are installed. With a protrusion of only 38 mm, the FMS-Lamps are sleek and unobtrusive during the day but make themselves very well-known at night!
Two light intensities are offered: the FMS1200 with 1200 lumens; and the FMS2500 with an even more powerful 2500 lumens. This light is the 2500 lumens option, but both lamps offer even close-range illumination directly underneath the lamp. The light is projected downwards at a fixed angle of 45 degrees, with no brackets to adjust.
Hella Marine LED technology is the answer for energy-efficient, completely sealed, shock and vibration-resistant lighting. Advanced electronics provide consistent illumination and circuit protection across a range of inputs from 9–32VDC for a long service life.
Features:
Deck floodlight for surface mounting
Low profile design
Close-range illumination
2500 lumens
Energy-efficient and durable LED technology
Specifications:
Housing Material: Die-cast aluminum, CoroSafe coating
Lens: Widespread diffuser
Mounting: Surface mount
Lumen: 2500 lumens
Color Temperature: 6500K (White)
Cable: Pre-wired with 500mm cable
Operating Voltage: Multivolt™ 9-32V DC, Nominal 12/24V DC
Power Consumption: 28W
Degree of Protection: IP 6K8 (Protection against dust and prolonged water immersion)
IP 6K9K (Protection against dust and high-pressure/steam jet cleaning)
Weight: 600g (including cable)
Approvals: ECE-R10, RCM, ADR/ GGVSEB
|
95.70 |
|
|
NaviLED PRO Starboard Navigation Lamp - Black - 3NM
This starboard power-saving LED navigation lamp is ultra-durable for enhanced safety. NaviLEDPRO lamps are proven worldwide on commercial, military, and recreational vessels.
*Designed for the starboard side of a vessel.
Ultra-Low Current Draw
This lamp consumes less than 3.2 watts combined.
No Bulbs, No Maintenance, and an Ultra-Long Service Life
Hella marine LED technology has no filaments to break, making NaviLEDPRO lamps extremely shock- and vibration-proof for proven reliability and safety in demanding conditions.
MultivoltTM 9-33V DC
Advanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages.
Fully Sealed for Life. IP67-Certified
This NaviLEDPRO lamp is a completely sealed unit. High-impact housing ensures durability from waves and impacts. Ultra-heavy-duty BSH versions use high-tech Grilamid lenses to offer superior strength in extreme conditions.
Pre-wired with 2.5m of Twin-Core Marine Cable
High-quality cable assemblies for time-saving, completely sealed installations.
Specifications:
Dimensions (W x H): 3.43 x 3.54 inches (87mm x 90mm)
Lamp Color: Black
Material Description: Hi-impact-resistant acrylic lens
Minimum Visible Distance: 3 nautical miles (powerboats only)
Cable: Pre-wired with 2.5m of twin core marine cable
Operating Voltage: Multivolt 9-33V DC
Voltage Protection: Spike is protected to +500 volts. Reverse polarity is protected to -700 volts
Power Consumption: Less than 3.2W
Degree of Protection: IP67 (completely sealed)
Weight: 250g (including cable)
Approvals: IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ
|
139.75 |
|
|
NaviLED PRO Port Navigation Lamp - Black - 3NM
This port power-saving LED navigation lamp is ultra-durable for enhanced safety. NaviLEDPRO lamps are proven worldwide on commercial, military, and recreational vessels.
*Designed for the port side of a vessel.
Ultra-Low Current Draw
This lamp consumes less than 3.2 watts combined.
No Bulbs, No Maintenance, and an Ultra-Long Service Life
Hella marine LED technology has no filaments to break, making NaviLEDPRO lamps extremely shock- and vibration-proof for proven reliability and safety in demanding conditions.
MultivoltTM 9-33V DC
Advanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages.
Fully Sealed for Life. IP67-Certified
This NaviLEDPRO lamp is a completely sealed unit. High-impact housing ensures durability from waves and impacts. Ultra-heavy-duty BSH versions use high-tech Grilamid lenses to offer superior strength in extreme conditions.
Pre-wired with 2.5m of Twin-Core Marine Cable
High-quality cable assemblies for time-saving, completely sealed installations.
Specifications:
Dimensions (W x H): 3.43 x 3.54 inches (87mm x 90mm)
Lamp Color: Black
Material Description: Hi-impact-resistant acrylic lens
Minimum Visible Distance: 3 nautical miles (powerboats only)
Cable: Pre-wired with 2.5m of twin-core marine cable
Operating Voltage: Multivolt 9-33V DC
Voltage Protection: The spike is protected to +500 volts. Reverse polarity is protected to -700 volts
Power Consumption: Less than 3.2W
Degree of Protection: IP67 (completely sealed)
Weight: 250g (including cable)
Approvals: IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ
|
139.75 |
|
|
Apelo A3 RGBW Underwater Light - Bronze - White Lens
The A3 model has an improved formula with double the light output, maximizing the vibrant blue, intense white, or full-spectrum RGBW* color. The RGBW version includes dedicated white light emitting LEDs, adding brighter and more intense white light to RGBW underwater lighting. Both versions sport the edge lighting, which Apelo is known for.
Optical intelligence is at the heart of Hella Marine lighting, and Apelo is no exception. Intelligent optics spread light across the water without losing light to the depths, projecting wide across the transom. With the addition of nickel-silver to the extremely corrosion-resistant housing, the Apelo A3 is perfect for permanently submerged installations on larger boats and ships.
*Connect Apelo RGBW lights to an RGBW lighting controller for unlimited color selection (Not supplied).
Features:
Suitable for fiberglass, timber, steel, and composite hulls
Only mount on aluminum-hulled vessels with a suitable isolation spacer
Made in New Zealand and backed by Hella Marine’s 5-year warranty (Apelo Underwater Lights are built to last)
Specifications:
Mounting: Transom/surface
Voltage: Multivolt™ 12 / 24V DC Nominal
Max. Power Consumption: RGBW 70W / 5.9A @ 12V, 2.9A @ 24V and Edge Light <5W / 0.37A @12V, 0.2A @ 24V
Max. Light Output: 6000 lumens (white)
Color Temperature: 5000K (white)
Beam: 90° x 24°
Protection: Spike protected to +500 volts; reverse polarity protected to -700 volts; IP68 / IP69: Suitable for submersion in operation and high-pressure water jet cleaning; High-temperature thermal cutout for out of water
Cable Length: 2.5m / 8.2ft, tinned marine cable
Ideal Depth: 100–500mm
Ideal Width: 600–1200mm
Lens Material: Grilamid® (premium grade, UV stable, impact resistant nylon)
Base Material: Marine grade bronze
Compliance: CE, UKCA, EN55015 / CISPR 15, IEC60533, IEC61547, ICES-005, RCM
|
554.44 |
|