|
Tsunami Mk2 T500 Aerator Kit
This aerator kit is recommended for fishing boats with built-in livewells that are not equipped with a thru-hull recirculation system. The pump is sealed and can be occasionally submerged; however, the electrical wires must never be submerged.
Kit Includes:
Aerator spray head
SS wire mesh strainer
Pump
Straight outlet fitting
Hose
Two hose clamps
Specifications:
Pump Model: T500
Flow Gal/HR: 500
Amp Fuse: 3
Outlet Hose Inner Diameter: 3/4” (19mm)
Two hose clamps
|
46.21 |
|
|
Tsunami Mk2 T500 Aerator - 12V - Straight Inlet
Keep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.
Features:
3-1/2 in. x 3/4 in. thru-hull
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:
Flow Gallon/Hour: 500
|
31.57 |
|
|
Tsunami Mk2 T500 Aerator - 12V - 3/4" NPT Inlet
Keep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.
Features:
7/8 in. x 3/4 in. seacock
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:
Flow Gallon/Hour: 500
|
33.91 |
|
|
Tsunami Mk2 T500 Aerator - 12V - 90-Degree Inlet
Keep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.
Features:
3-1/2 in. x 3/4 in. thru-hull
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:
Flow Gallon/Hour: 500
|
35.71 |
|
|
Tsunami Mk2 T800 Aerator - 12V - Straight Inlet
Keep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.
Features:
3-1/2 in. x 3/4 in. thru-hull
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:
Flow Gallon/Hour: 800
|
39.22 |
|
|
Tsunami Mk2 T800 Aerator 12V 3/4" NPT Inlet
Keep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.
Features:
7/8 in. x 3/4 in. seacock
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:
Flow Gallon/Hour: 800
|
40.08 |
|
|
Tsunami Mk2 T800 Aerator - 12V - 90-Degree Inlet
Keep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.
Features:
3-1/2" x 3/4" thru-hull
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:
Flow Gallon/Hour: 800
|
42.85 |
|
|
Tsunami Mk2 T1200 Aerator - 12V - Straight Inlet
Keep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.
Features:
3-1/2" x 1-1/8" thru-hull
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:
Flow Gallon/Hour: 1200
|
48.20 |
|
|
Tsunami Mk2 T1200 Aerator - 12V - 1" NPT Inlet
Keep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.
Features:
7/8" x 1" seacock
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:
Flow Gallon/Hour: 1200
|
51.40 |
|
|
Tsunami Mk2 T1200 Aerator - 12V - 90-Degree Inlet
Keep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.
Features:
3-1/2" x 1-1/8" thru-hull
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:
Flow Gallon/Hour: 1200
|
50.00 |
|
|
Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH & 12V
This is a complete kit (includes a bilge pump) to install a manual bilge pump with a 3/4" I.D. hose outlet. The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.
Kit Includes:
Attwood Tsunami Mk2 500 GPH Pump
Washer / Non-Return Valve
90-degree Outlet
Straight Outlet
3/4" x 5' Pump Hose
3/4" Thru-hull fitting
2-way on/off switch with bezel plate
Snap-It hose clamps
Wire Kit
Installation Kit
Easy Installation & Service
GPH (Gallons Per Hour): 500
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12V
Fuse Size: 3 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 3/4" and 1"
*Caution: Bilge pump switches are not external ignition protected
|
54.14 |
|
|
Tsunami MK2 Manual Bilge Pump - T500 - 500 GPH & 12V
The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.
Easy Installation & Service
GPH (Gallons Per Hour): 500
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12V
Fuse Size: 3 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 3/4" and 1"
*Must be used with appropriate Tsunami outlet
|
25.90 |
|
|
Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 12V
The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.
Easy Installation & Service
GPH (Gallons Per Hour): 800
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12V
Fuse Size: 4 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 3/4" and 1"
*Must be used with appropriate Tsunami outlet
|
41.18 |
|
|
Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 24V
The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.
Easy Installation & Service
GPH (Gallons Per Hour): 800
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 24V
Fuse Size: 2 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 3/4" and 1"
*Must be used with appropriate Tsunami outlet
|
42.96 |
|
|
Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 12V
The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.
Easy Installation & Service
GPH (Gallons Per Hour): 1200
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12V
Fuse Size: 5 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 1" and 1-1/8"
*Must be used with appropriate Tsunami outlet
|
53.88 |
|