175WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut. For use with: B164 B175 SS164 SS264 IMPORTANT: the design of the housing for these transducers changed slightly in June 2012. This wrench is for the newer design and has an internal width of 2-3/4". If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2-7/16".

117WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze and stainless steel housings (P617V, B617V, SS617V). Use wrench 117WR-2 or 117WR-3 for the hull nut. *Note that this wrench will not fit on the CA500 camera housing.

60WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 60WR-2 or 60WR-3 for the hull nut. For use with: B60 SS60

75WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 75WR-2 or 75WR-3 for the hull nut. For use with: B75 SS75

Single Handle Transducer Nut Wrench for B260, SS260, B265C, B275C 260-WR-2 fits B260, SS260, B265C and B275C.

Groco P-9021-A Check Valve with 1/4" Port Replacement Part for C-60 & C-80 Deck Wash Pumps Check Valve Assembly

A-Series Rock Light Kit - 4 Cool White Lights - Black The RIGID Rock Light Kit uses the power and durability of A-Series LED lighting and adds custom 15’ leads on each light, a distribution block, plus switch and angled mounts to light up any truck, Jeep, or all-terrain vehicle. This kit will allow you to light up the trail with strategically placed lights on the vehicle. Perfect for night rock crawling. Features: 50000+ Hr LED Lifespan Instant On/Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Extruded Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA In the Box: A-Series with 15’ Leads Distribution Block for Easy Wiring 8’ Wiring Harness Angled Mounting Pads w/30° Angle Mounting Hardware

A-Series Rock Light Kit - 4 Red Lights - Black The RIGID Rock Light Kit uses the power and durability of A-Series LED lighting and adds custom 15’ leads on each light, a distribution block, plus switch and angled mounts to light up any truck, Jeep, or all-terrain vehicle. This kit will allow you to light up the trail with strategically placed lights on the vehicle. Perfect for night rock crawling. Features: 50000+ Hr LED Lifespan Instant On/Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Extruded Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA In the Box: A-Series with 15’ Leads Distribution Block for Easy Wiring 8’ Wiring Harness Angled Mounting Pads w/30° Angle Mounting Hardware

A-Series Rock Light Kit - 4 Blue Lights - Black The RIGID Rock Light Kit uses the power and durability of A-Series LED lighting and adds custom 15’ leads on each light, a distribution block, plus switch and angled mounts to light up any truck, Jeep, or all-terrain vehicle. This kit will allow you to light up the trail with strategically placed lights on the vehicle. Perfect for night rock crawling. Features: 50000+ Hr LED Lifespan Instant On/Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Extruded Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA In the Box: A-Series with 15’ Leads Distribution Block for Easy Wiring 8’ Wiring Harness Angled Mounting Pads w/30° Angle Mounting Hardware

A-Series Rock Light Kit - 4 Amber Lights - Black The RIGID Rock Light Kit uses the power and durability of A-Series LED lighting and adds custom 15’ leads on each light, a distribution block, plus switch and angled mounts to light up any truck, Jeep, or all-terrain vehicle. This kit will allow you to light up the trail with strategically placed lights on the vehicle. Perfect for night rock crawling. Features: 50000+ Hr LED Lifespan Instant On/Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Extruded Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA In the Box: A-Series with 15’ Leads Distribution Block for Easy Wiring 8’ Wiring Harness Angled Mounting Pads w/30° Angle Mounting Hardware

Quick Cleat - On a Patch for Inflatables - 1/4" The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  The perfect solution for securing ropes onto inflatables, featuring a Quick Cleat mounted onto a Hypalon ™patch. The unit can be glued into position and has a working load of 30 kg. Ideal for RIBs, paddleboards and inflatable Kayaks where an easy, quick and simple solution is required for rapid tying of ropes horizontally or vertically. Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.  Quick Cleats are designed to alter rope tension in one direction but grip the rope firmly and securely in the other.  Securely hold fenders, tender and painter lines, Ribs, buckets, boat gear and equipment, covers, trampolines and water toys of all kinds. Features: Dupont Zytel nylon construction fitted on a Hypalon pad Multi-weather adhesive tested up to 113° F (45° C) Technical Specifications: Material - Zytel nylon Working Load - 66 lb (30 kg) Maximum Rope Diameter - 1/4" (6 mm) Height - 1-1/16" (2.7 cm) Weight - 2.3 oz (65 g) *Sold as an Individual 

R509C-LM CHIRP 3KW Transducer Unlock the true potential of your fish-finder with the superior quality and performance of an AIRMAR Chirp-ready transducer. Features: Depth & fast-response water-temperature sensor Epoxy transducer housing with high-performance fairing For use on hulls up to 25° deadrise 82 kHz of total bandwidth from one transducer Benefits of Thru-Hull Transducers with High-Performance Fairing: The best performance on vessels 25 feet and up because the transducer face is in “clean” water below the boundary layer (bubbles running down the hull) The fairing compensates for hull deadrise and reduces turbulence over the transducer face, which allows tracking at speeds over 30 knots (35 MPH) When mounted in clean water (forward of propellers and running gear), thru-hulls produce the most effective signal return since nothing on the vessel interferes with the transducer’s active surface Specifications: Boat Size: 12 m (40 ft.) and above Hull Type: Fiberglass, wood, or metal Engine Type: Inboard, outboard or I/O Low (28 kHz to 60 kHz): 23° to 9° port/starboard 11° to 5° fore-aft beamwidth Maximum depth 10000 ft Medium (80 kHz to 130 kHz): 13° to 8° beamwidth Maximum depth 3000 ft. Bottom Coverage Relative to Frequency and Depth Depth (50 ft.): 10 ft. Depth (100 ft.): 24 ft. Depth (300 ft.): 68 ft. Depth (600 ft.): 136 ft. Depth (1000 ft.): 228 ft. Depth (1500 ft.): 340 ft. Depth (2000 ft.): 456 ft. Depth (2500 ft.): 570 ft. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B175 Bronze Low Frequency 1kW Chirp Transducer 0° Tilt - Requires Mix & Match Cable Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The low frequency band is the deep water performer delivering excellent coverage and tracking in deeper depths. The B175L transducer delivers up to 20 kHz of total bandwidth in just one installation and delivers tremendous deep water performance. The B175L transmits across the following bandwidth: Low Frequency 40 to 60 kHz Tilted element transducers have the ceramic element fixed at either a 20°, 12° or 0° angle within the transducer housing. The transducer is installed almost flush to the hull and the tilted element corrects for the hull deadrise by orienting the beam directly down. This assures maximum echo returns to the transducer and more accurate depth readings. Features: Depth and fast-response water-temperature sensor 1 kW Low Frequency: 40 kHz to 60 kHz with maximum depth performance to 762 m (2500') 32° to 21° beamwidth Great deep water performance High performance, low-profile thru-hull housing provides good resolution at speed when installed properly Bronze housing for use on stepped, planing or displacement hulls in fiberglass or wood Recommended boat size: Up to 11 m (36') Exclusive Xducer ID® technology Specifications: Weight: 2.7 kg (6 lb) Hull Deadrise: 0-7 degrees Acoustic Window: Urethane Hole Size: 98 mm (3-7/8") Seven internal broadband ceramic assemblies This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

xSonic SS175M Stainless Steel Thru-Hull Tilted Medium CHIRP Transducer - 20° Element - 9-Pin Features: Black 9-Pin Connector Cable Length - 10M (33.0') SS175M - 1-Internal Broadband Ceramic Assembly Depth & fast-response water-temperature sensor Stainless Steel transducer housing Hull Type: Steel or aluminum Boat Size: Up to 11M (36’) Useable shaft length 71mm (2.80”) Medium-Frequency (M) Medium—Chirps from 85 kHz to 135 kHz, 24° to 16° beamwidth 50 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth Medium-frequency benefits include the ability to sound deeper than the high-frequency, along with better target resolution than the low-frequency

xSonic SS175M Stainless Steel Thru-Hull Tilted Medium CHIRP Transducer - 12° Element - 9-Pin Features: Black 9-Pin Connector Cable Length - 10M (33.0') SS175M - 1-Internal Broadband Ceramic Assembly Depth & fast-response water-temperature sensor Stainless Steel transducer housing Hull Type: Steel or aluminum Boat Size: Up to 11M (36’) Useable shaft length 71mm (2.80”) Medium-Frequency (M) Medium—Chirps from 85 kHz to 135 kHz, 24° to 16° beamwidth 50 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth Medium-frequency benefits include the ability to sound deeper than the high-frequency, along with better target resolution than the low-frequency