|
Designed and manufactured exclusively for Insta-Trim with nylon-reinforced webbing and protective PVC coating. Rated at 2000 lb. burst pressure, 400lb working pressure. Entering the transom 6" above the water line, the hoses are held securely with hose trim. Stainless steel clamps hold the hose to barb fitting at the solenoid.
|
5.40 |
|
|
3" Blue Polyduct Blower Hose - Sold by the Foot
Trident Polyduct is the most flexible, crush proof and rugged blower duct hose for heat, ventilation, and air conditioning* (HVAC). Heavy Duty polypropylene hose, reinforced with a flexible polypropylene rod helix.
Features:
Sold by the foot
Excellent flexibility & compressibility
Excellent resistance to crushing, flex fatigue, tearing, and moisture
Stomp on it and it returns to shape without damage
Shove it thru tight openings and overheads and it delivers full airflow
Application:
Rugged blower duct hose for heat, ventilation, and air conditioning
Specifications:
Temperature Range: -40°F to +225°F (-40°C to 107°C) (when insulated)
Inner Diameter (inch): 3"
*Meets FMVSS 302 flame resistance
|
8.32 |
|
|
1-1/2" Type A2 Fuel Fill Hose - Sold by the Foot
Trident 1-1/2" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends).
Features:
Sold by the foot
This hose is built with the best fuel, fire, and age-resistant formulation
Provides extraordinary resistance to aging, fire, heat, cold, and the ozone
Also, provides excellent bend-ability
Applications:
Marine Fuel Hose for fill and vent plus diesel distribution
Approved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel
Construction:
Tube & Cover: NBR / Neoprene
Reinforcement: High tenacity polyester 2 spiral, spring steel helix
Temperature Range: -20°F to 212°F (-20ºC to 100ºC)
Specifications:
Inner Diameter: (inch) 1/2" / (mm) 38
Outer Diameter: (inch) 2 / (mm) 51
Wall: (inch) 0.25 / (mm) 6.4
Working Pressure: (psi) 60 / (mpa) 0.41
Bend Radius: (inch) 5.5" / (mm) 140
*The #327 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved
|
14.21 |
|
|
2" Type A2 Fuel Fill Hose - Sold by the Foot
Trident 2" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends).
Features:
Sold by the foot
This hose is built with the best fuel, fire, and age-resistant formulation
Provides extraordinary resistance to aging, fire, heat, cold, and the ozone
Also, provides excellent bend-ability
Applications:
Marine Fuel Hose for fill and vent plus diesel distribution
Approved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel
Construction:
Tube & Cover: NBR / Neoprene
Reinforcement: High tenacity polyester 2 spiral, spring steel helix
Temperature Range: -20°F to 212°F (-20ºC to 100ºC)
Specifications:
Inner Diameter: (inch) 2" / (mm) 50.8
Outer Diameter: (inch) 2.48 / (mm) 63.5
Wall: (inch) 0.25 / (mm) 6.4
Working Pressure: (psi) 50 / (mpa) 0.345
Bend Radius: (inch) 7.0" / (mm) 178
*The #327 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved
|
22.56 |
|
|
1-1/4" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the Foot
Trident Flex wet exhaust hose for longer bent connections. In smaller i.d.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Sold by the foot
Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius
Resists heat, ozone, exhaust, sani chemicals, panting, and collapse
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Specifications:
Inner Diameter: (inch) 1-1/4" / (mm) 31.8
Outer Diameter: (inch) 1.40" / (mm) 32
Working Pressure: (Psi) 70 / (bar) 4.8
Bend Radius: (inch) 1.5" / (mm) 38
Weight: (Lb./50 ft.) 35 / (Kg/m) 15.7
*Burst Pressure is 4 x Working Pressure
|
11.90 |
|
|
1-1/2" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the Foot
Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Sold by the foot
Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Specifications:
Inner Diameter: (inch) 1-1/2" / (mm) 38
Outer Diameter: (inch) 1.97 / (mm) .05
Working Pressure: (Psi) 60 / (bar) 4.1
Bend Radius: (inch) 4.0" / (mm) 102
Weight: (Lb./50ft.) 45 / (Kg/m) .518
*Burst Pressure is 4 x Working Pressure
|
14.50 |
|
|
3/4" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the Foot
Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Sold by the foot
Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius
Resists heat, ozone, exhaust, sani chemicals, panting, and collapse
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Specifications:
Inner Diameter: (inch) 3/4" / (mm) 20
Outer Diameter: (inch) 1.15" / (mm) 29
Working Pressure: (Psi) 100 / (bar) 6.9
Bend Radius: (inch) 1" / (mm) 25
Weight: (Lb./50ft.) 23 / (Kg/m) 10.3
*Burst Pressure is 4 x Working Pressure
|
10.22 |
|
|
1" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the Foot
Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Sold by the foot
Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius
Resists heat, ozone, exhaust, sani chemicals, panting, and collapse
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Specifications:
Inner Diameter: (inch) 1" / (mm) 25.4
Outer Diameter: (inch) 1.57" / (mm) 25
Working Pressure: (Psi) 80 / (bar) 5.5
Bend Radius: (inch) 1.3" / (mm) 33
Weight: (Lb./50ft.) 30 / (Kg/m) 13.5
*Burst Pressure is 4 x Working Pressure
|
11.28 |
|
|
1" Heavy Duty Reinforced PVC (FDA) Hose - Drinking Water Safe - Clear - Sold by the Foot
Clear FDA-grade PVC hose with heavy-duty nylon reinforcement provides excellent flexibility and bend radius.
Features:
Sold by the foot
Good flexibility and bend radius
Resists odor, taste, and up to 250 PSI/WP (depending on I.D. size) @ 70°F (21°C)
This hose is safe for use with drinking water
Applications:
For pressurized drinking water systems and many other uses
For cold and hot tap water
Construction:
Tube: Plasticized PVC (FDA)
Color: Clear with white nylon reinforcement
Reinforcement: PVC and HD nylon reinforcement
Temperature Range: 20°F to 150°F (-7ºC to 66ºC)
Specifications:
Inner Diameter: (inch) 1" / (mm) 25.4
Outer Diameter: (inch) 1.185 / (mm) 30.1
Burst Pressure: (PSI @ 70ºF) 25.7 / (bar) 1.77
Working Pressure: (PSI @ 70ºF) 90
Bend Radius: (inch) 4" / (mm) 101.6
|
3.64 |
|
|
3/4" VAC XHD Bilge & Live Well Hose - Hard PVC Helix - Black - Sold by the Foot
Trident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose making installations a breeze.
Features:
Sold by the foot
149 series of hoses is extra flexible
Application:
Bilge and live well hose
Specifications:
Tube & Cover: Hard PVC helix
Color: Black
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-48°C)
Inner Diameter: (inch) 3/4" / (mm) 19.1
Outer Diameter: (inch) .986" / (mm) 25
Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93
Weight: (Lb./ 50 ft.) 11 / (Kg/m) 4.99
Bend Radius: (inch) 3" / (mm) 76.2
*Burst Pressure is 4 x Working Pressure
|
3.16 |
|
|
1-1/2" VAC XHD Bilge & Live Well Hose - Hard PVC Helix - Black - Sold by the Foot
Trident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose making installations a breeze.
Features:
Sold by the foot
149 series of hoses is extra flexible
Application:
Bilge and live well hose
Specifications:
Tube & Cover: Hard PVC helix
Color: Black
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-48°C)
Inner Diameter: (inch) 1-1/2" / (mm) 38.1
Outer Diameter: (inch) 1.792" / (mm) 45.5
Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93
Weight: (Lb./ 50 ft.) 22 / (Kg/m) 9.98
Bend Radius: (inch) 4" / (mm) 101.6
*Burst Pressure is 4 x Working Pressure
|
6.84 |
|
|
1-1/8" VAC XHD Bilge & Live Well Hose - Hard PVC Helix - Black - Sold by the foot
Trident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose making installations a breeze.
Features:
Sold by the foot
149 series of hoses is extra flexible
Application:
Bilge and live well hose
Specifications:
Tube & Cover: Hard PVC helix
Color: Black
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-48°C)
Inner Diameter: (inch) 1-1/8" / (mm) 28.6
Outer Diameter: (inch) 1.433" / (mm) 36.4
Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93
Weight: (Lb./ 50 ft.) 15 / (Kg/m) 6.80
Bend Radius: (inch) 3" / (mm) 76.2
*Burst Pressure is 4 x Working Pressure
|
4.80 |
|
|
3/4" Heavy Duty PVC Bilge & Livewell Hose (FDA) - Clear with Black Helix - Sold by the Foot
Trident Smooth extra heavy wall vinyl (FDA) well hose. All clear (see thru) with black helix. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs are required.
Features:
Sold by the foot
Flexible, but the 147 series is less flexible than the 149 series of hoses
Application:
Bilge and live well hose
Specifications:
Tube & Cover: Clear vinyl reinforced with black helix
Color: Clear with black helix
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-49°C)
Inner Diameter: (inch) 3/4" / (mm) 19
Outer Diameter: (inch) 0.968" / (mm) 24.6
Working Pressure: (Psi Vac In./Hg) 28
Weight: (Lb./ 50 ft.) 11 / (Kg/m) 0.33
Bend Radius: (inch) 2.25" / (mm) 57.2
*Burst Pressure is 4 x Working Pressure
|
3.10 |
|
|
1-1/8" Heavy Duty PVC Bilge & Livewell Hose (FDA) - Clear with Black Helix - Sold by the Foot
Trident Smooth extra heavy wall vinyl (FDA) well hose. All clear (see thru) with black helix. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs are required.
Features:
Sold by the foot
Flexible, but the 147 series is less flexible than the 149 series of hoses
Application:
Bilge and live well hose
Specifications:
Tube & Cover: Clear vinyl reinforced with black helix
Color: Clear with black helix
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-49°C)
Inner Diameter: (inch) 1-1/8" / (mm) 28.6
Outer Diameter: (inch) 1.39" / (mm) 35.4
Working Pressure: (Psi Vac In./Hg) 28
Weight: (Lb./ 50 ft.) 15 / (Kg/m) 0.45
Bend Radius: (inch) 3.5" / (mm) 8.9
*Burst Pressure is 4 x Working Pressure
|
4.18 |
|
|
Standard Duplex Cable - Flat 16/2 AWG - 2 x 1mm² Red/Black -Sold by the Foot
Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600 Volts, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.
|
0.44 |
|