N2K Wind Mast Cable 20M 20M (66 ft) NMEA2000 Wind vane cable (Micro-C male - Simnet) 

Triton² Speed/Depth/Wind System Pack - Wired Wind Pack The clearest, multi-purpose sailing instrument with dedicated sailing features. Features: Optically bonded 4.1-inch color display Transflective LCD technology for optimum sunlight viewing Unique sailing features including SailSteer and WindPlot Display wind, speed, depth, heading, autopilot status, and much more Easy to use, easy to install Low power consumption The full-color Triton² Display provides sailors with a clear visual representation of key instrument data including Speed, Depth, Wind, Heading, AIS targets, GPS data, and more. An Optically Bonded display means absolutely zero condensation or fogging, while transflective LCD technology provides exceptional contrast and visibility – day or night – while consuming less power than traditional backlight-only displays. The flexible, NMEA 2000® certified, Triton² Display can be integrated into a wider navigation system and also be combined with a Triton² Pilot keypad and NAC autopilot computer to create a complete autopilot control system, featuring B & G sail-specific autopilot steering algorithms. Specifications: Dimensions: 118 x 115 x 36 mm (4.6 x 4.5 x 1.4") Weight: 0.32 kg (0.7 lbs) Color: Black Display Size: 4.1" (diagonal). 4:3 Aspect ratio Display Type: Transflective TFT-LCD, bonded. White LED backlight Display Resolution: 320 x 240 pixels Illumination: White for day mode. Red, green, blue, or white for night mode What's in the box? 000-13294-001 Triton² Digital Display. 000-15735-001 IDST-810 active D/S/T TH plastic 235 kHz transducer. 000-10760-001 2k Backbone Starter Kit 000-14391-001 WS310 Wind Sensor 000-14396-001 N2K Wind Mast cable 20 m 000-14389-001 ws310 wired interface only

WS310 Wind Pack Wired Includes: Wired wind sensor Bracket 20m Mast Cable Network interface Micro-C T joiner  Fixings kit A high precision wired wind sensor, designed for cruising and club racing sailors. The B&G WS310 wind sensor offers high performance data accuracy, with improved aerodynamics suitable for all yachts. Pack includes 20M cable and WS310 Interface.  The WS310 wind sensor is the perfect solution for any sailor looking to get accurate and fast wind data to their instruments from a wired wind sensor. High Performance Designed to provide highly accurate wind data in all conditions at all points of sail and heel. Reliability Thousands of hours of real-life testing have proved this instrument to be exceptional in all conditions, providing fast and accurate data at all times.

Wired Tactical Wind Mast Sensor A high performance system that sends NMEA wind speed and direction data 10 times a second. In demanding conditions, where high performance is essential, the Clipper Tactical wind mast sensor is the ideal choice. With ten updates every second it responds very quickly to the changes in wind speed and direction, which occur during tricky manoeuvres. The sensor is supplied complete with a mast mounting kit, 20 metres of light weight cable and all necessary electrical connectors to complete the installation. The output data is in the NMEA 0183 format and can be used to drive any compatible display that utilises the MWV sentence. Features: Mast transmitter supplied with 20M of cable NMEA 0183 4800 Baud data sentence MWV – update rate = 10 per second Wind speed 0 to 99.9 Kts Wind direction 0 to 360° Supply voltage nominal 12V Wind sensor supply current 9mA This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Mast Cable f/ Analog Wind Sensor - 30M (98.4") Mast Cable (Analog Wind Sensor) - 30M (98.4') Features: Cable length - 30M (98.4') *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

RSW Wired - Smart Performance Wind Transducer - Short Arm with 30M Cable The RSW Wired, Smart Wind transducer is a professional-level wind sensor designed to deliver highly accurate calibrated wind speed and direction data. Supplied with a 30-meter Smart Wind mast cable as standard. Install & Go! Raymarine Smart Wind technology delivers expert-level accuracy without the need for additional, expensive processors or extensive calibration and set-up.  Finely Tuned Through rigorous wind tunnel testing, we've fine-tuned and balanced the instrument to ensure that data from the masthead is accurate and consistent. Sail Smarter Trusted, high-accuracy True Wind data combined with the Alpha Performance Displays and Axiom Chartplotters let you sail smarter. Specifications: Length     Wind transducer (including cable): 657.762 mm (25.90 in) Wind transducer (excluding cable): 540.712 mm (21.29 in) Wired gateway: 155.61 mm (6.13 in) Width     Wind transducer: 46.96 mm (1.85 in) Wired gateway: 47.38 mm (1.88 in) Height     Wind transducer: 305.86 mm (12.04 in) Wired gateway: 30.61 mm (1.21 in) Power Nominal supply voltage: 12 V dc (via SeaTalk NG) Operating voltage range: 9 V to 16 V dc Power Consumption: < 100 mW Fuse rating: Ensure that the SeaTalk NG backbone is protected by a 5 A fuse NMEA 2000 LEN (Load Equivalency Number) - based on nominal 9 V rating: 1 Environmental Operating temperature range: -25°C to +55°C (-13°F to +131°F) Storage temperature range: -30°C to +70°C (-22°F to +158°F) Relative humidity: Masthead: 100%/Below deck: up to 93% @ 40°C Waterproof rating: Wind transducer: IPx6/IPx7/Wired gateway: IPx3 Wind: 115 mph (185 kph) Vibration: EN 60945:2002 (exposed) What's In The Box? No.10 x 3/4" self tapping screws x 4 (for mounting the wind transducer) No.7 x 3/4" self tapping screws x 2 (for mounting the gateway) 40 mm (1.57 in) heat shrink tube (required to insulate ground wire when shortening the mast cable) Ring crimp terminal (required for additional ground connection when the gateway is not mounted on a metal surface) Mast cable, 30 m (98.43 ft) reel Documentation Wind transducer Smart wind-wired gateway SeaTalk NG to DeviceNet adaptor cable, 120 mm (4.72 in)

608 Wind Sensor Without Cable Networked wind sensor for Triton2, Triton, IS42, IS40 and IS20 systems. Sensor only, does not include cable. Compatible with previous 508 and IS20 wind sensor mast cables and brackets.

NF4 - Non Follow-Up Remote with Auto Function N2K with 6M Cable Features: NF4, Non Follow-Up Remote with Auto function N2K 6M Cable Flush Mount Only

VMHU Mast Cable - 36m B&G 36 meter (118') cable for vertical arm masthead units.

TS4 - Full Follow-Up Remote with Auto Function N2K with 6M Cable ComNav's full follow-up remote with auto function. NMEA 2000, 6 meter cable, for use with P4 Autopilot. 

Mid Bulk Cable - 20M Continuous Mid bulk cable is primarily used as drop cable, but it can also be used at the trunk line depending on network power requirements. Bulk cable with field-attachable connectors allows for maximum flexibility as cables can be made on the job to exact lengths.  Features: Meets and exceeds NMEA 2000® specifications for the highest reliability Used with field-attachable connectors to build exact length cables at the job site Optimized for voltage drop sensitive networks (long runs) because power pair wires have half the resistance of Micro cable

SeaTalk hs Network Cable, 20m Raymarine SeaTalk hs network cables provide waterproof, reliable, high-speed connections between E-Series components. Available in multiple lengths to simplify installation, the network cable locks positively into E-Series displays, switches and couplers. A 1.5 meter SeaTalk hs cable is supplied with each E80 and E120 display.

SimNet to Micro-C Mast Cable - 35M 35M (115') NMEA 2000 Wind Vane Cable (Micro-C Male - Simnet).

i60 Wind Masthead only, no cables ONLY works with Raymarine st60 and i60 series wind displays.

CCU/ECU Interconnect Cable - 20M Extend your bare wires and your ECU (electronic control unit) to CCU (course computer unit) interconnect cable with this 65.6 ft (20 m) cable. We also offer a 32.8 ft (10 m) cable if less length is needed to install your GHP™ 10. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.