Rail / Side Mount Lets you secure your downrigger to the rail of your boat. No cutting or drilling necessary. Just clamp this aluminum mount to the rail and position your downrigger on the base. It can also be used to mount a downrigger to the side of your boat when gunwales won't accommodate deck plates or bases. Should be attached at the "T" joint of the rail. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Shakespeare Style 4720 Economy Rail Antenna Mount Shakespeare's Style 4720 Economy Rail Mount is designed for quick and easy installation on vertical or horizontal, straight or angled rails. Its simple design makes installation a snap. The vice section grips the rail, and the flat section supports the antenna. The flat section can also be bolted to a flat surface, instead of to the rail grip. Standard 1" - 14 thread Nylon adapters included for 7/8", 1", and 1-1/4" vertical or horizontal rails Stainless steel construction

Pontoon Rail Adapter Mount Rail Mount Adapter is designed to adapt wrap around style rail mounts to square pontoon railing with full height paneling.  The adapter saddles the top rail and securely clamps in place with the included Allen key.  It stays in place without any drilling or permanent installation damage.  The Grill Mount Adapter is made of durable stainless steel and aluminum that resists rust and corrosion.  Features: Use in addition to wrap-around style grill mount to mount grill on a pontoons' full height paneling No need to drill holes into fence panel or railing Easily adjusts from 1.4" to .75" with included Allen key Stainless steel and aluminum construction is rust-resistant Heavy-duty and durable *Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 12"  These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive, with no visible mounting hardware.

Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 18"  These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive, with no visible mounting hardware.

Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 24"  These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive, with no visible mounting hardware.

Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 10"  These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive, with no visible mounting hardware.

Horizontal Rail Accessory Mount - 3" Disk Edson’s Stainless Horizontal Rail Accessory Mount puts your hand-held GPS securely and conveniently within reach on your Steering Pedestal Guard. With its 3" Disk Platform you can mount your GPS hand held or other items that need a secured place to stay. Designed to attach to all 1”, 1-1/8” and 1-1/4” pedestal guard tubes by clamping the two pieces together around the guard tube without the need for removal of the tubes or any existing wiring.

Horizontal Rail Accessory Mount - 5" Disk Edson’s Stainless Horizontal Rail Accessory Mount puts your hand-held GPS securely and conveniently within reach on your Steering Pedestal Guard. With its 5" Disk Platform you can mount your GPS hand held or other items that need a secured place to stay. Designed to attach to all 1”, 1-1/8” and 1-1/4” pedestal guard tubes by clamping the two pieces together around the guard tube without the need for removal of the tubes or any existing wiring.

Black Side Mount LED Navigation Lights - 1 NM - Port & Starboard  LED Side Mount Lights 400078 are approved for USCG 1 NM (Colreg 1 mile). Constructed of injection molded ABS. One pair includes port and starboard lights. Surface mounts vertically with two #8 FH fasteners (not included). 12VDC. Low amp draw.  All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Side Mount LED Navigation Lights - 2 NM - Port & Starboard  LED Side Mount Side Lights 400079 are approved for USCG 2 NM (Colreg 2 mile). Constructed of corrosion resistant stamped 304 stainless steel. One pair includes port and starboard lights. Surface mounts vertically with two #8 FH fasteners (not included). 12VDC. Low amp draw.  All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bait Caster / Spinning Rod Holder Holds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top. Includes No. 241 combination deck or side mount. WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

280 Bait Caster / Spinning Rod Holder Holds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top. Includes No. 241 combination deck or side mount. WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Portable Side Mount with Dual Lock 4 Rod Holder The great side-mount Rod Holder in a portable version.  Easy to install using a 3M Dual-lock technology.  Simply clean and place the mounting squares where you want and you're done.  The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion.  Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods.  Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations.  Holds up to 4 Rods.

Portable Side Mount with Dual Lock 6 Rod Holder The great side-mount Rod Holder in a portable version.  Easy to install using a 3M Dual-lock technology.  Simply clean and place the mounting squares where you want and you're done.  The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion.  Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods.  Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations.  Holds up to 6 Rods.